• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.25 no.3
• /
• pp.55-66
• /
• 2020

Near-inertial waves (NIW) which are primarily generated by wind can contribute to vertical mixing in the ocean. The energetic NIW can be generated by typhoon due to its strong wind and preferable wind direction changes especially on the right-hand side of the typhoon. Here we investigate the generation and distribution of NIW using the output of a real-time ocean forecasting system. Five-year model outputs during 2013-2017 are analyzed with a focus on cases of energetic NIW generation by the passage of three typhoons (Halong, Goni, and Chaba) over the East Sea. Calculations of wind energy input (${\bar{W}}_I$), and horizontal kinetic energy in the mixed layer (${\bar{HKE}}_{MLD}$) reveal that the spatial distribution of ${\bar{HKE}}_{MLD}$, which is strengthened at the right-hand side of typhoon tracks, is closely related with ${\bar{W}}_I$. Horizontal kinetic energy in the deep layer (${\bar{HKE}}_{DEEP}$) shows patch-shaped distribution mainly located at the southern side of the East Sea. Spatial distribution of ${\bar{HKE}}_{DEEP}$ shows a close relationship with negative relative vorticity regions caused by warm eddies in the upper layer. Monthly-mean ${\bar{HKE}}_{MLD}$ and ${\bar{HKE}}_{DEEP}$ during a typhoon passing over the East Sea shows about 2.5-5.7 times and 1.2-1.6 times larger values than those during summer with no typhoons, respectively. In addition, their magnitudes are respectively about 0.4-1.0 and 0.8-1.0 times from those during winter, suggesting that the typhoon-induced NIW can provide a significant energy to enhance vertical mixing at both the mixed and deep layers during summer.

• Journal of Aquaculture
• /
• v.10 no.3
• /
• pp.261-271
• /
• 1997

Ammonia removal capacities of five submerged filter media, 2~3mm sand, 30~50mm gravel, 20~40mm coral sand, polythylene net, and corrugated plastic plate in a seawater recirculating system were tested. A rotating biological contactor (RBC) was also tested for comparison. Oxygen consumption rates were measured along with the ammonia removal efficiencies. The ammonia concentrations in the system were maintained from 0.052 to 0.904 mg/l (mean 0.338$\pm$0.219 mg/l) and the water temperature was ranged from 19.2 to $21.4^{\circ}C\;(mean 20.2^{\circ}C\pm0.58^{\circ}C$). The 1/2-order kinetic model (Y:g/$m^3$/day) and the mean ammonia removal rates (g/$m^3$/day) of the filter media were : Sand : Y=135.5X0.5-25.1(r2=0.8110), 45.1 Coral sand : Y=125.1X0.5-33.0 (r2=0.7307), 31.8 Polyethylene net : Y=87.4X0.5-20.1 (r2=0.6780), 25.2 Corrugated plastic plate : Y=87.4X0.5-20.1(r2=0.5206), 19.2 Gravel : Y=4307X0.5-5.5 (r2=0.2596), 17.1 RBC : Y=127.6X0.5-33.4 (r2=0.7146), 32.8 where X is the concentration of ammonia. Oxygen consumption rates well corresponded to the ammonia removal capacities of each filter medium, thus the sands showing the highest value (442g/$m^3$/day) followed by coral sands (291.1g/$m^3$/day), polyethylene nets (236.9g/$m^3$/day), gravels (135.6g/$m^3$/day) and corrugated plastic plates (134.2g/$m^3$/day). Oxygen consumption rate of the RBC was unable to measure because of the characteristics of the structure.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.2
• /
• pp.85-94
• /
• 2012

The $AsO_4$ ion in acid mine drainage has been known to substitute for $SO_4$ in schwertmannite and prevent schwertmannite from being converted to goethite. There have been studies on the heavy metal sorption on schwertmannite, but no experimental results have been reported on the characteristics of heavy metal sorption on $AsO_4$-substituted schwertmannite. In this study, we conducted sorption experiments of Cu, Pb, and Zn on the $AsO_4$-substituted schwertmannite at pH 4 and 6 in the solution of 3, 10, 30, and 100 mg/L concentrations. For all heavy metals, the sorbed heavy metals significantly increase at pH 6 compared with at pH 4. At both pH 4 and 6, Pb shows the highest sorption capacity and those of Cu and Zn are similar. With increasing time, the sorbed heavy meal contents increase too. However, in the case of Zn, the most sorptions occur at the initial stage and no significant increase is observed with time. Among the concentration ranges in which we conducted the experiment, the increasing trend is clear in high concentrated solutions such as 100 mg/L. We applied several sorption kinetic model and it shows that the diffusion process may be the most important factor controlling the sorption kinetics of Cu, Pb, and Zn on $AsO_4$-substituted schwertmannite. Considering the previous results that pure schwertmannite has similar sorption capacity for all three heavy metals at pH 6 and has higher sorption capacity for Cu and Pb than Zn at pH 4, our experiments indicates that substitution of $AsO_4$ for $SO_4$ on schwertmannite changes surface and sorption characteristics of schwertmannite. It also shows that $AsO_4$ contributes not only to the stability of schwertmannite, but also to the mobility of heavy metals in acid mine drainage.

• Korean Journal of Microbiology
• /
• v.52 no.3
• /
• pp.278-285
• /
• 2016

The bifunctional PheA protein, having chorismate mutase and prephenate dehydratase (CMPD) activities, is one of the key regulatory enzymes in the aromatic amino acid biosynthesis in Escherichia coli, and is negatively regulated by an end-product, phenyalanine. Therefore, PheA protein has been thought as useful for protein engineering to utilize mass production of essential amino acid phenylalanine. To obtain feedback resistant PheA protein against phenylalanine, we mutated by using random mutagenesis, extensively screened, and obtained $pheA^{FBR}$ gene encoding a feedback resistant PheA protein. The mutant PheA protein contains substitution of Leu to Phe at the position of 118, displaying that higher affinity (about $290{\mu}M$) for prephenate in comparison with that (about $850{\mu}M$) of wild type PheA protein. Kinetic analysis showed that the saturation curve of $PheA^{FBR}$ against phenyalanine is hyperbolic rather than that of $PheA^{WT}$, which is sigmoidal, indicating that the L118F mutant enzyme has no cooperative effects in prephenate binding in the presence of phenylalanine. In vitro enzymatic assay showed that the mutant protein exhibited increased activity by above 3.5 folds compared to the wild type enzyme. Moreover, L118F mutant protein appeared insensitive to feedback inhibition with keeping 40% of enzymatic activity even in the presence of 10 mM phenylalanine at which the activity of wild type $PheA^{WT}$ was not observed. The substitution of Leu to Phe in CMPD may induce significant conformational change for this enzyme to acquire feedback resistance to end-product of the pathway by modulating kinetic properties.

• Economic and Environmental Geology
• /
• v.51 no.4
• /
• pp.359-370
• /
• 2018

The batch and column experiments were performed to overcome the limitation of the neutralization process using the $scCO_2$-water-recycled aggregate, reducing its treatment time to 3 hour. The waste cement mortar and two kinds of recycled aggregate were used for the experiment. In the extraction batch experiment, three different types of waste mortar were reacted with water and $scCO_2$ for 1 ~ 24 hour and the pH of extracted solution from the treated waste mortar was measured to determine the minimum reaction time maintaining below 9.8 of pH. The continuous column experiment was also performed to identify the pH reduction effect of the neutralization process for the massive recycled aggregate, considering the non-equilibrium reaction in the field. Thirty five gram of waste mortar was mixed with 70 mL of distilled water in a high pressurized stainless steel cell at 100 bar and $50^{\circ}C$ for 1 ~ 24 hour as the neutralization process. The dried waste mortar was mixed with water at 150 rpm for 10 min. and the pH of water was measured for 15 days. The XRD and TG/DTA analyses for the waste mortar before and after the reaction were performed to identify the mineralogical change during the neutralization process. The acryl column (16 cm in diameter, 1 m in length) was packed with 3 hour treated (or untreated) recycled aggregate and 220 liter of distilled water was flushed down into the column. The pH and $Ca^{2+}$ concentration of the effluent from the column were measured at the certain time interval. The pH of extracted water from 3 hour treated waste mortar (10 ~ 13 mm in diameter) maintained below 9.8 (the legal limit). From XRD and TG/DTA analyses, the amount of portlandite in the waste mortar decreased after the neutralization process but the calcite was created as the secondary mineral. From the column experiment, the pH of the effluent from the column packed with 3 hour treated recycled aggregate kept below 9.8 regardless of their sizes, identifying that the recycled aggregate with 3 hour $scCO_2$ treatment can be reused in real construction sites.

• KSBB Journal
• /
• v.17 no.1
• /
• pp.73-79
• /
• 2002

The method to optimize the microbial production of ethanol from CO using Clostridium ljungdahlii was developed. The kinetic parameter study on CO conversion with Clostridium ljungdahlii was carried out and maximum CO conversion rate of 37.14 mmol/L-hr-O.D. and $K_{m}$ / of 0.9516 atm were obtained. It was observed that method of two stage fermentation, which consists of cell growth stage and ethanol production stage, was effective to produce ethanol. When pH was shifted from 5.5 to 4.5 and ammonium solution was supplied to culture media as nitrogen source at ethanol production stage, the concentration of ethanol produced was increased 20 times higher than that without shift. Ethanol production from CO in a fermenter with Clostridium ljungdahlii was optimized and the concentration of ethanol produced was 45 g/L and maximun ethanol productivity was 0.75 g ethanol/L-hr.

• Korean Journal of Biological Psychiatry
• /
• v.14 no.3
• /
• pp.184-193
• /
• 2007

Objectives:There is increasing evidence that the cerebellum plays an important role in cognition and psychiatric symptoms as well as motor coordination. The concept of cognitive dysmetria has been making cerebellar function in schizophrenia the focus of current studies. In other words, disruption in the corticocerebellum-thalamic -cortical circuit could lead to disordered cognition and clinical symptoms of schizophrenia. The purposes of this study were to determine cerebellar dysfunction in male schizophrenic patients semiquantitatively with ICARS and to investigate the clinical and cognitive correlates of ICARS in patients. Methods:We compared the scores of cerebellar neurologic sign using ICARS in 47 male patients with a DSM-IV-TR diagnosis of schizophrenia with 30 gender and age-matched healthy control subjects. The semiquantitative 100-point ICARS consists of 19 items divided into 4 unequally weighted subscores:posture and gait disturbances, kinetic functions, speech disorders and oculomotor disorders. All subjects were also assessed with cognitive function test. Cognitive functions were evaluated by Korean-Mini Mental Status Examination (K-MMSE), Verbal fluency test, and Clock drawing test. The patients were administered Korea version of Positive and Negative Symptom Scale(K-PANSS) to assess the symptom severity. Results:Schizophrenic patients had significantly higher scores on the ICARS than control subjects with posture and gait disturbances, kinetic functions, and oculomotor disorders. They also showed more significant impairments in cognitive function tests than control subjects. There was a significant correlation between ICARS and negative symptoms of patients. In cognitive function test, Clock drawing test was significantly associated with negative symptoms. In addition, Clock drawing test was negatively correlated with the total score of ICARS. Conclusion:In this study, we confirmed that schizophrenic patients have significant impairments in cognitive and cerebellar function, and that those were related with negative symptoms of schizophrenic patients. These results support a role of the cerebellum in schizophrenia. It is meaningful that we used a structured, and reliable procedure for rating neurological soft signs, ICARS. We hope that future prospective studies using a similar design help that rate of neurological sign should have been visible with the progression of illness.

• Korean Journal of Food Science and Technology
• /
• v.11 no.4
• /
• pp.242-248
• /
• 1979

To detect proper lytic assay conditions of the crude zumolyase from Arthrobacter luteus, effets of the various factors involved in the lytic system of Sacchromyces sake cultured with shaking in the malt extracts medium were investigated. The results are summarized as follows : 1. The susceptibilities of viable cells of S. sake from logarithmic growth phase to the lytic enzmye were much greater than those of the cells in lag and stationary phases. The cells cultured for 18 hr were the most susceptible to the enzyme. 2. Lytic activity of the enzyme toward the viable cells of S. sake was very low. It was, however, enhanced 4 folds of more by the pretreatment of the cells with 0.05 M sodium sulfite. 3. Lytic activity of the enzyme toward commercial baker's yeast cells was negligible, and the effect of sodium sulfite on the lysis of the cells also was nothing but a little. 4. The lyophilized cells of the baker's yeast showed more susceptibility to the lytic enzyme than viable cells of the yeast. No definite effect of sodium sulfite on the lysis of the lyophilized cells, however, was observed either baker's yeast of S. sake. 5. It appeared that the relationship between the reaction rate and the enzyme concentration on the lysis of the yeast cell walls followed enzyme kinetic theory, but one between the reaction rate and concentration of the yeast cells as substrates showed different pattern from that in enzyme kinetic theory. 6. After the preparation of crude zymolyase was kept at $7^[\circ}C$ for 10 days in the 0.05 M phosphate buffer, pH 7.5, the remainning lytic activity was about 80 %.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.986-993
• /
• 2010

In this study, sorption characteristics of thermally treated activated alumina (AA) for fluoride were investigated. Sorption experiments have been conducted in equilibrium and kinetic batch conditions. Also, effects of solution pH and anions on fluoride removal have been observed. The properties of thermally treated ( $700^{\circ}C$) activated alumina (AA700) and untreated activated alumina (UAA) were compared using field-emission scanning electron microscope, energy-dispersive spectrometry, X-ray diffractometer (XRD) analysis, and Brunauer-Emmett-Teller (BET) analysis. From the experiments using AA thermally treated at different temperatures (100, 300, 500, $700^{\circ}C$), it was found that at high fluoride concentrations (50, 100, 200 mg/L) the sorption capacity of thermally treated AA increased with increasing thermal treatment temperature. At an initial fluoride concentration of 200 mg/L, the sorption capacity of AA700 was 3.67 times greater than that of UAA. The BET analysis showed that the specific surface area of UAA was about 2 times larger than that of AA700. The XRD analysis indicated that UAA was composed of both boehmite (AlOOH) and bayerite ($Al(OH)_3$) while AA700 was $Al_2O_3$. The reason that fluoride sorption capacity of AA700 increased despite of decrease in specific surface area compared to UAA could be attributed to the change of crystal structure. The kinetic sorption test showed that fluoride sorption to AA700 arrived at equilibrium after 24 h. The equilibrium test demonstrated that the maximum sorption capacity of AA700 was 5.70 mg/g. Additional batch experiments indicated that fluoride sorption to AA700 was the highest at pH 7, decreasing at both acidic and basic solution pHs. Also, fluoride sorption to AA700 decreased in the presence of anions such as phosphate, nitrate, and carbonate. This study demonstrated that thermal treatment of AA at high temperature could increase its sorption capacity for fluoride.

• Journal of fish pathology
• /
• v.31 no.1
• /
• pp.23-34
• /
• 2018

The pharmacokinetic properties of cefadroxil (CDX) were studied after oral administration for 7 days to cultured olive flounders (average 660 g), Paralichthys olivaceus. For examination of pharmaco-kinetic profiles, CDX of 45 to 225 mg/kg body weight was administered at two different water temperatures, $13{\pm}3^{\circ}C$ or $22{\pm}3^{\circ}C$. CDX concentrations were determined in muscle, plasma, gastrointestinal tract, hematopoietic organs and liver by HPLC-MS/MS. Muscle samples were taken at 0.25, 0.5, 1, 3, 7, 14 and 28 days post dose, whereas plasma, gastrointestinal tract, hematopoietic organs and liver concentrations were measured at 1, 3, 7, 14 and 28 days post-dosing. The kinetic profiles of $C_{max}$, $T_{max}$, $T_{1/2}$ of CDX were analyzed by fitting to a non-compartmental model with PKSolver program. The following pharmacokinetic parameters were obtained with oral administration of 45 and 225 mg/kg at 13 and $22^{\circ}C$ in muscle, plasma, gastrointestinal tract, hematopoietic organs and liver, respectively: $C_{max}$ (maximum tissue concentration)=$985.98-5,032.86{\mu}g/kg$, $5,670.99-38,922.23{\mu}g/l$, $2,457.27-10,192.78{\mu}g/kg$, $886.04-3,070.87{\mu}g/kg$ and $1,188.15-3,814.33{\mu}g/kg$; $T_{max}$ (time for maximum concentration)= every 1 day; $MRT_{0-{\infty}}$ (mean residence time)= 1.51-4.74, 2.12-3.06, 4.25-13.18, 1.37-18.66 and 1.78-29.76 days; $T_{1/2}$ (half-life)= 1.08-3.47, 1.14-5.42, 3.56-10.99, 1.17-14.93 and 1.25-28.55 days.