• Journal of Chest Surgery
• /
• v.24 no.10
• /
• pp.960-966
• /
• 1991

From February 1984 through July 1991, 104 infants less than 1 year of age with congenital heart defects underwent open heart repair with conventional cardiopulmonary bypass which occupied 10.7% of all patients with congenital heart defects operated on during same period. There were 66 boys and 38 girls 7 days to 12 months [mean age, 8.2 months]. Four patients were neonates, 8 were 1 to 3 months, 23 were 4 to 6 months, and 69 were 7 to 12 months of age. Mean body weight at repair was 6.9kg and mean BSA, 0.36m2 Indications for operation were intractable congestive heart failure and severe pulmonary hypertension in patients with VSD and severe cyanosis and anoxic spells in patients with TOF. Conditions corrected were VSD[79], TOF[8], AVSD[4], PS[2], PA+IVS[2], TAPVC [2], MR[2], DOLV[l], Truncus arteriosus[1], D-TGA[1], and PA-VSD[1]. Twenty-three of 79 patients with VSD had associated cardiovascular anomalies which included PDA in 16 patients, PS in 9 patients, ASD in 5 patients, LSVC in 2 patients, MR in 1 patient, dextrocardia in 1 patient, and single coronary artery in 1 patient. The hospital mortality rate was 24.0% which was much higher than that of 6% in patients over 1 year of age. The greatest mortality occurred in babies of low weight under 6 months of age, There was no late death. Surviving infants showed marked symptomatic improvement and change in growth patterns. These surgical results were to be overcome with proper pre- and post-operative management and improvement of surgical technique

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.96-104
• /
• 2009

An anatomically detailed elderly human body model is under development. Using the anthropometric database of domestic nation-wide size survey, SizeKorea, a standard size and shape of 50th %tile elderly was constructed. Through the local recruitment process, a male volunteer with 71 years of age, 163cm of height and 63kg of weight has been selected. The exterior (skin) and interior (skeleton and organ) geometries were acquired from whole body 3D laser scan and various medical images such as CT, X-ray, and Ultrasonic of the volunteer. A particular attention has been paid into the combining process of exterior and interior geometries especially for joint articulation positions since they were measured at different postures (sitting vs. supine). A whole ribcage of PMHS which possessed similar anthropometry and age of standard 50th %tile elderly was prepared and dissected for the precise gauge of cortical rib bone thickness distributions. After completing the morphological construction of elderly human body, the finite element modeling will be processed by meshing elements and assigning mechanical properties to various biological tissues which reflect the aging effect.

• Food Science of Animal Resources
• /
• v.20 no.2
• /
• pp.139-145
• /
• 2000

This study was conducted to investigate the storage and quality characteristics of vegetable hot dog. The b-value of sausage was increased significantly, but the color of bread was not changed during storage. The hardness, springiness, cohesiveness and chewiness of sausage were not changed, but the gumminess was increased during storage. The hardness, springiness, cohesiveness and gumminess of bread were not changed, but the chewiness was decreased during storage. The moisture content of sausage was not changed, but that of bread was decreased during storage. The pH of vegetable hot dog showed 5.67~5.71 during storage. The TBA of sausage was increased from 0.13 to 0.29mg/kg, the VBN was increased from 4.24 to 5.46mg% during storage. The total plate counts showed $3.5\times$104 CFU/g 8 days of storage. The coliform group, Staphylococcus aureus. Salmonella and Vibrio parahaemolyticus were not detected during storage. The vegetable hot dog was found to be fresh by sensory scores such as taste, aroma, color, texture and palatability, and the appearance of mold and slime was not detected during storage.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.3_4
• /
• pp.72-81
• /
• 1995

This study was performed to evaluate the mechanical properties of high performance lightweight polymer concrete using fillers and synthetic lightweight coarse aggregate. The following conclusions were drawn. 1. The unit weight of the G3, G4 and G5 concrete was 1.500t/m$^3$, 1.506t/m$^3$ and 1.535t/m$^3$, respectively. Specially, the unit weights of those concrete were decreased 33~35% than that of the normal cement concrete. 2. The highest strength was achieved by heavy calcium carbonate, it was increased 27% by compressive, 95% by tensile and 195% by bending strength than that of the normal cement concrete, respectively. 3. The elastic modulus was in the range of 8.0 x 104~ 10.4 x lO4kg/cm2, which was approximately 35~42% of that of the normal cement concrete. Normal cement concrete was showed relatively higher elastic modulus. 4. The ultrasonic pulse velocity of fillers was in the range of 2, 900m/sec, which was showed about the same compared to that of the normal cement concrete. Heavy calcium carbonate was showed higher pulse velocity. 5. The compressive, tensile, bending strength and ultrasonic pulse velocity were largely showed with the increase of unit weight.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.2
• /
• pp.259-267
• /
• 1998

Typical characteristics of Mejus must be understood to get the basic data for setting up mass production system of traditional fermented soybean products. One hundred and twenty one Mejus were collected from various places and analyed. Most of shapes were rectangular and some were spherical, conical, cylindrical and doughnut types. The weight of Mejus was 0.4~4.2kg. Chemical analysis showed: moisture content, 9.73~58.22% ; pH, 4.95~8.15; acidity, 0.6~3.8% ; soluble protein content, 4.45~12.31%; soluble sugar content, 0.82~10.95%. Enzyme assay showed: $\alpha$-amylase activity, 5.0~874.2 units/g; $\beta$-amylase activity, 0.02~27.74units/g; acidic protease activity, 31.3~225.1unts/g; lipase activity 1.0~53.0units/g. Total viable cells were 3.72$\times$107~1.35$\times$1010cfu/g, and yeast and mold count 6.46$\times$104~8.91$\times$106cfu/g. respectively. $\alpha$-Amylase activity of a traditional Meju from Incheon showed the highest activity of 732.8 units/g(interior section) and 823.2units/g (exterior section). $\beta$-Amylase activity was the highest{3.57 units/g (interior sectin) and 4.25units/g (exterior section)} in Meju from Chunbuk. Acidic protease activity was the highest in sample from Seoul, whereas traditional Meju from Kyongnam showed the highest activity of 21.5units/g(interior section) and 37.5units/g(exterior sectin).

• Journal of the Ergonomics Society of Korea
• /
• v.18 no.1
• /
• pp.1-12
• /
• 1999

The objective of this study was to investigate the metabolic energy consumption rate of the psychophysical Maximum Acceptable Weight of Loads (MAWLs) for different manual materials handling tasks. Lifting activities with four different lifting frequencies (2, 5, 8, 11 lifts/min) for a lifting range (from floor to 76cm height) were studied. The oxygen consumption rate and heart rate were measured or recorded while subjects were lifting their MAWLs. It was found that the relationship between MAWL and frequency can be described best by the exponential function with the R-sq value 0.9865 for this study. Psychophysical MAWL decreased from 22.38 to 7.48 kg, while the oxygen consumption rate with the MAWL increased from 717.8 to $1114.7m{\ell}-O_2/min$ as the frequency increased from 2 to 11 lifts/min. Heart rate also increased from 104.5 to 120.7 bpm. The ratio of oxygen consumption for the MAWL to the Physical Work Capacity (PWC) ranged from 28 to 43%. The MAWLs were greater than or equal to the Maximum Permissible Limits (MPLs) when the frequencies were higher than 8 lifts/min. It seems that the MAWLs by psychophysical approach when the frequencies were higher than 8 lifts/min tend to be overestimated from the viewpoint of the physiological criterion of the oxygen consumption rates. From these findings it is suggested that the NIOSH Guideline should not be directly applied to Korean without reasonable modifications.

• Journal of the Korean Society of Food Culture
• /
• v.30 no.1
• /
• pp.97-104
• /
• 2015

Antioxidant activity of dropwort fermented extract (DFE) was measured according to fermentation period, and liver protective effects were examined using Sprague-Dawley rats. Total polyphenol and flavonoid contents as well as DPPH and ABTS radical scavenging activities increased up to 60~80 days and then decreased slightly. Proper fermentation time for DFE was more than 60 days and less than 80 days. Administration of alcohol to rats for 10 days at 10 mL/kg/day raised serum AST, ALT, total cholesterol, and triglyceride (TG) levels, which were then lowered by DFE and sugar liquid with the same soluble solids. While sugar liquid increased the blood lipid profile, especially TG levels, DFE had no effect due to its antioxidant activity. When TBARS content of the DFE group in liver tissue significantly decreased in a concentration-dependent manner compared to that of the ALH group (p<0.05). Liver damage was recovered by DFE treatment and was confirmed by hamatoxylin-eosin staining. These results suggest that DFE has a protective effect against alcohol-induced hepatotoxicity in SD rats.

• Korean Journal of Plant Resources
• /
• v.17 no.3
• /
• pp.257-264
• /
• 2004

Selection of stress-tolerant ginseng lines in fields is very difficult because it is almost impossible to control properly the environmental conditions of soil. On the contrary, it can be studied with ease to search for stress-tolerant ginseng lines through in vitro culture because of easy manipulation of stress conditions. This study was conducted for the selection of ginseng pure lines tolerant to salt stress. Murashige ＆amp; Skoog(MS) media with 2.5 folds of KNO$_3$, NH$_4$NO$_3$, MgSO$_4$.7$H_2O$, KH$_2$PO$_4$, and CaC1$_2$.2$H_2O$ was established for the selection of ginseng pure lines tolerant to salt stress in vitro. Among 88 ginseng pure lines bred by Korea Ginseng and Tobacco Research Institute, Punggi Hwangsuk, 78093, 82886, 78135, 86024 and KG104 lines was tolerant to salt stress. For the stable production of quality Korean ginseng, genetic tolerance to salt stress is one of important factors since relatively high salt concentrations in the ginseng nursery soil environment of Korea. Ginseng inbred pure lines were tested for their tolerance to salt stress through in vitro culture technique.

• Korean Journal of Applied Biomechanics
• /
• v.29 no.2
• /
• pp.97-104
• /
• 2019

Objective: The aim of this study was to investigate the strategies for avoiding moving and stationary walker using body segments during walking. Method: Ten healthy young adults (10 males, age: $24.40{\pm}0.49yrs$, height: $175.80{\pm}5.22cm$, body mass: $70.30{\pm}5.22kg$) participated in this study. Each participant was asked to perform a task to avoid collisions with another walker who was moving or stationary during walking on the 10 m walkway. Both walkers were performed at natural self-selected walking speed. Results: Medio-lateral avoidance displacement of the trunk and the pelvis were significantly increased when avoiding a stationary walker (p<.05). There were no significant differences in medio-lateral center of mass trajectory. Rotation angle of trunk, pelvis and foot on the vertical axis were significantly increased when avoiding a stationary walker (p<.05). Conclusion: Based on our results, when another walker moves continuously, the walker recognizes another walker as the object of social interaction and performs the avoidance strategies while expecting the cooperative distance. On the other hand, when another walker is stopped, it is determined that the walker has an obligation to avoid, and the walker performs a relatively safer avoidance strategy.

• Animal Bioscience
• /
• v.37 no.3
• /
• pp.451-460
• /
• 2024

Objective: The objective is to identify genomic regions and candidate genes associated with age to 105 kg (AGE), average daily gain (ADG), backfat thickness (BF), and eye muscle area (EMA) in Yorkshire pig. Methods: This study used a total of 104,380 records and 11,854 single nucleotide polymorphism (SNP) data obtained from Illumina porcine 60K chip. The estimated genomic breeding values (GEBVs) and SNP effects were estimated by single-step genomic best linear unbiased prediction (ssGBLUP). Results: The heritabilities of AGE, ADG, BF, and EMA were 0.50, 0.49, 0.49, and 0.23, respectively. We identified significant SNP markers surpassing the Bonferroni correction threshold (1.68×10^-6), with a total of 9 markers associated with both AGE and ADG, and 4 markers associated with BF and EMA. Genome-wide association study (GWAS) analyses revealed notable chromosomal regions linked to AGE and ADG on Sus scrofa chromosome (SSC) 1, 6, 8, and 16; BF on SSC 2, 5, and 8; and EMA on SSC 1. Additionally, we observed strong linkage disequilibrium on SSC 1. Finally, we performed enrichment analyses using gene ontology and Kyoto encyclopedia of genes and genomes (KEGG), which revealed significant enrichments in eight biological processes, one cellular component, one molecular function, and one KEGG pathway. Conclusion: The identified SNP markers for productive traits are expected to provide valuable information for genetic improvement as an understanding of their expression.