• 열처리공학회지
• /
• 제25권5호
• /
• pp.227-232
• /
• 2012

Magnesium alloy have good physical properties such as good castability, good vibration absorption, high strength/weight ratios. Despite the desirable properties, the poor resistance of Mg alloy impedes their use in many various applications. Therefore, magnesium alloy require surface treatment to improve hardness, corrosion and wear resistance. Plasma Electrolytic Oxidation (PEO) is one the surface treatment methods to form oxide layer on Mg alloy in alkali electrolyte. In comparison with Anodizing, there is environmental process having higher hardness and faster deposition rate. In this study, the characteristics of oxide film were examined after coating the AZ31 Mg alloy through the PEO process. We changed concentration of sodium aluminate into $K_2ZrF_6$, KF base electrolyte. The morphologies of the coating layer were characterized by using scanning electron microscopy (SEM). Corrosion resistance also investigated by potentiodynamic polarization analysis. As a result, propertiy of oxide layer were changed by concentration of sodium aluminate. Increasing with concentration of sodium aluminate in electrolyte, the oxidation layer was denser and the pore size was smaller on the surface.

• 한국연초학회지
• /
• 제15권2호
• /
• pp.145-151
• /
• 1993

Using a flue - cured tobacco variety, KF lH9, recently bred and released to farming, effect of growth regulators(fatty alcohol and C - MH) on the change of alkaloid contents and dynamics of MH uptake and distribution were investigated. An efficient sucker control method was also pursued. Treatment of fatty alcohol at button stage remarkably increased the rate of C - MH uptake. However, except in the plants treated with 2- fold volume of C - MH, residue of C -MH was kept under maximum residue level(80 ppd). C - MH residue in stalk was higher than in foliage in general. Compared to untreated control, leaf weight per unit area was increased by the treatment even in lower leaves where vigorous transfer of C - MH from treated tips was indicated and sucker control higher than 94.9% was achieved with all treatments except for sole half volume C - MH treatment at topping stage. Alkaloid content in foliage was reduced by dual treatment of fatty alcohol and C - MH but increased in stalk and root.

• 한국미생물·생명공학회지
• /
• 제36권4호
• /
• pp.276-284
• /
• 2008

숙성된 김치로부터 항진균 활성을 나타내는 균주 1종과 감수성을 나타내는 곰팡이 1종을 분리하였다. 분리된 균주는 형태학적, 생화학적 특성 조사와 165 rRNA 염기서열 결정을 통한 균주 동정 결과 Lactobacillus plantarum AF1으로 명명하였고, 감수성 곰팡이는 ITS-5.8S rRNA 염기서열 분석을 통하여 Epicoccum nigrum KF-1으로 명명하였다. Dual culture overlay assay를 통한 Lb. plantarum AF1의 항진균 활성 실험 결과 A. ochraceus, A fumigatus, C. gossypiicola 등 식품 부패 곰팡이 및 병원성 곰팡이에 강한 생육 저해 활성을 나타내었다. 또한 항균 물질에 의한 항미생물 활성 범위를 측정한 결과 항진균 활성 외에도 식중독균주를 포함한 그람 양성 및 음성 세균들에 강한 저해 활성을 나타내어 Lb. plantarum AF1은 넓은 항미생물 활성 범위를 가지는 것을 알 수 있었다. Lb. plantarum AF1의 생육에 따른 항진균 활성을 측정한 결과 항진균 활성은 배양 20시간부터 최대 활성(3,200 AU/ml)을 나타내어 120시간까지 활성이 감소되지 않고 유지되었다. 항진균 물질의 안정성 실험을 통하여 AF1 항진균 물질은 산성의 pH(pH $3.0{\sim}4.0$)와 열에 안정한 물질이며, 단백분해효소 처리에 영향을 받지 않으므로 비단백질성 물질이거나 단백분해효소의 영향을 받지않는 구조의 물질임을 추정하였다. AF1 항진균 물질의 분자량을 예측하기 위하여 Lb. plantarum AF1의 배양액을 3,000 Da 이상과 이하의 분획으로 나누어 항진균 활성을 측정한 결과 AF1 항진균 물질은 분자량 3,000 Da 미만의 물질임을 확인하였다. 본 실험에서 분리한 김치유산균인 Lb. plantarum AF1은 넓은 범위의 항진균 활성 및 항세균 활성을 나타내므로 강력한 천연 식품보존제 및 사료보존제로서 활용이 기대된다.

• Weed & Turfgrass Science
• /
• 제5권4호
• /
• pp.260-267
• /
• 2016

아미노산은 식물에서 질소 동화 과정에서 생성되는 대사물질이며, 단백질을 발효하여 얻어진 부산물은 아미노산비료의 원료로 사용되고 있다. 본 연구는 케라틴 아미노산 비료의 시비에 따른 잔디의 생육과 품질의 변화를 확인하기 위해 엽색지수, 엽록소지수, 잔디 줄기 밀도, 잔디 예지물, 잔디 중 양분 함량 및 양분 흡수량을 조사하였다. 처리구는 무처리구(NF), 대조구(CF), 케라틴 아미노산 비료 추천량처리구(CKF)와 배량처리구(2CKF) 및 케라틴 아미노산 비료 단독 처리구(KF)로 구분되었다. 케라틴 아미노산 비료 처리에 후 처리구별 토양화학성, 잔디의 엽색지수 및 엽록소지수의 변화는 나타나지 않았다. 반면에 잔디 줄기 밀도와 잔디 예지물은 케라틴 아미노산비료를 시비한 케라틴 아미노산 비료 단독처리구나 복합비료와 함께 처리한 처리구에서 각각 25~35%와 11% 정도씩 증가하였다. 잔디중 양분 함량은 처리구별로 비슷하였으나 잔디의 양분 흡수량은 질소와 칼륨이 CKF 처리구에서 증가하였다. 이 결과들을 종합해 볼 때, 크리핑 벤트그래스에서 케라틴 아미노산 비료의 시비는 잔디의 질소와 칼륨의 흡수를 촉진함으로써 잔디 줄기 밀도와 생육을 증가시키는 효과가 있음을 확인 할 수 있었다.

• 한국분말재료학회지
• /
• 제11권4호
• /
• pp.333-340
• /
• 2004

In this study, tantalum powder has been producted by MR-EMR combination process. MR-EMR combination process is a method that is able to improve demerits of MR(metallothermic reduction) and EMR(electronically mediated reaction) process. This study examined the characteristics of powder with the amount of reductant excess using $K_2$TaF$_{7}$ as feed materials, Na as a reductant and KCl/KF as a diluent. In addition, this study examined acid treatment that affect the high purification of powder. The impurities contained in powder was removed in various conditions of acid treatment. The total charge passed through external circuit and average particle size(FSSS) were increased with increasing amount of sodium excess. The proportion of fine particle(-325mesh) was decreased with increasing amount of sodium excess. The yield was improved from 70％ to 76% with increasing amount of sodium excess. Considering the impurities, charge, morphology, particle size and yield, an amount of sodium excess of 10wt% were found to be optimum conditions for MR-EMR combination process.s.

• 한국응용과학기술학회지
• /
• 제21권3호
• /
• pp.191-196
• /
• 2004

An emulsion of octadecamidoethylaminoethyl dodecate (which provides softness) and an emulsion silicone oil KF-96 (which provides lubricity) were separately synthesized. Then PP finishing softeners (SSA-7) was prepared by blending of the synthesized emulsions with beef tallow hardened oil (a softness improving agent). PP finishing treatment was carried out with the prepared SSA-7 and PP finishing resin by a one bath method, and several physical properties were tested. As a result, crease recovery, tear strength, softness, lubricity, and bending resistance were all good, indicating that the prepared SSA-7 is a good PP finishing softener.

• The Plant Pathology Journal
• /
• 제16권5호
• /
• pp.264-268
• /
• 2000

A fluorescent material was accumulated in inoculated leaves showing necrotic local lesions of tobacco plants with N gene, Nicotiana tabacum cvs. Xanthi-nc NN, Samsun NN, Burley 21 and KF 114, and N. glutinosa, and Datura stramonium at the early growth stages by the inoculation of Tobacco mosaic virus (TMV). It was identified as a coumarin phytoalexin, scopoletin. Although the material was most prominently produced in TMV-inoculated tobacco leaves with local necrotic lesions, its accumulation was also noted in uninoculated leaves of TMV-inoculated plants. Its accumulation was somewhat greater in high resistance-induced leaves than low resistance-induced and intact leaves. Scopoletin treatment induced the expression of a pathogenesis-related protein, PR-1, prominently at the concentration of 500 or 1000 ${\mu}$g/ml. This suggests that scopoletin is a phytoalexin abundantly accumulating in N gene-containing resistant plants in response to TMV infection, and may be related to hypersensitive responses (HR) and systemic acquired resistance (SAR) in the resistant tobacco plants.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.277-289
• /
• 2019

Herein, a case study discussing the effect of carbonaceous aerosol pollution, which is emitted during the charcoal kiln manufacturing processes or carbonization processes, on the atmospheric environment is presented . In South Korea, in situ analysis of different charcoal production plants specialized in the production of charcoal sauna indicate that the emitted organic carbon (OC) and elemental carbon (EC) aerosols are significantly influenced by the nature of the biomass and technological processes, i.e., treatment or emissions abatement systems for the exhaust effluent gases. In detail, total carbon (TC), which is calculated as the sum of OC and EC emission factors, varied widely from a charcoal production site to another ranging from 21.8 to 35.8 gTC/kg-oak, where the mean value for the considered production sites was approximately 28 gTC/kg-oak (N = 7 and sum = 196.4). Results indicate that the emission factors from a modern charcoal production process in South Korea are quantitatively lower in comparison with the traditional kiln. This study aims to propose advanced wood processes for the production of charcoal from the viewpoint of environmental protection policy and green engineering.

• 한국결정성장학회지
• /
• 제22권5호
• /
• pp.227-232
• /
• 2012

차세대 원자력발전용 고온 열교환기 소재로 이용될 가능성이 높은 Ni-Cr계 고온합금인 Inconel 617과 Hastelloy X의 표면처리에 따른 FLiNaK(LiF-NaF-KF) 용융염 하에서의 고온물성에 대한 연구를 수행하였다. Inconel 617과 Hastelloy X기판 상에 각각 PVD인 arc discharge 및 sputtering법에 의해 TiAlN 및 $Al_2O_3$ 박막을 코팅 하였다. 이러한 표면처리가 이들 합금의 FLiNaK 용융염 하 고온 안정성에 미치는 영향에 대해 연구하였다. 용융염 하 Ni-Cr계 고온합금의 부식 원리를 이해하기 위해, 용융염 수송 loop에 사용 중 파단된 Inconel 파이프에 대한 미세구조 분석을 수행하였다. 표면처리 된 합금들을 $600^{\circ}C$ 용융염 내에서 열처리 하였으며, 열처리 전후 시편들에 대해 상형성, 미세구조 등 고온 물성 변화를 측정하였다. 연구결과 코팅되지 않은 경우 보다 TiAlN 및 $Al_2O_3$ 박막이 코팅된 소재에서 보다 우수한 고온 안정성을 보여주었다.

• Environmental Analysis Health and Toxicology
• /
• 제14권3호
• /
• pp.113-120
• /
• 1999

Fluorination of drinking water has been used world widely to reduce the incidence of caries. Recently, contradictory results on the cytotoxicity of fluoride compounds are reported. In addition, there are attempts to use fluorosilicate for fluorination of drinking water in Korea, therefore, we tried to analyze the cytotoxicity of fluoride compounds on oral epidermoid carcinoma (KB and A253) and osteosarcoma (HOS and MG-63) cells in this study. We treated cells with 0, 10, 50 and 250 ppm of fluorosilicic acid (domestic or from Fluka, F$\_$6/H$_2$Si), sodium fluorosilicate (F$\_$6/Na$_2$Si), sodium fluoroacetate (FCH$_2$CO$_2$Na), sodium fluoride (NaF) or potassium fluoride(KF) and measured the relative cell survival by MTT assay. At the concentration of < 10ppm, no significant cytotoxicity was observed. At 50 ppm, each cells revealed different response to fluoride treatment. Among cells used in this study, MG-63 was the most resistant to fluoride treatment. Comparable toxicity data from domestic and imported fluorosilicic acids were obtained. When we compared the relative cytotoxicity of fluoride compounds against their fluoride contents, the differences in relative cell survival were smaller. Most of cells showed < 20% of survival at 250 ppm. In order to analyze the pH dependence of the cytotoxicity of fluorosilicates, the pH of cell culture media containing fluorosilicate was adjusted to 7.4 or 6.5 and the relative cytotoxicity was measured. At lower pH, about 10% higher cytotoxicity was obtained. Thus, our data suggested that the toxicity of domestic fluorosilicic acid was similar to that of fluorosilicic acid from Fluka, and the cytotoxicity of fluoride compounds was dependent on the relative content of fluoride and pH.