• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.626-634
• /
• 2017

This study investigated garment formability of the 73 breathable fabrics for sports-wear garment and their fabric mechanical properties were measured using KES-FB and FAST systems. Predicted garment formability from the mechanical properties measured using KES-FB and FAST systems was compared and discussed with fabric structural parameters. In addition, virtual 3D simulation silhouette by I-designer CAD system wear appearance by simulation using 3D CAD system. And compared with FAST finger chart by mechanical properties of FAST system. The correlation coefficients of extensibility and shear modulus between KES-FB and FAST systems were high, however, bending rigidity and compressibility showed relatively low correlation coefficients. The correlation coefficient of garment formability of breathable fabrics between KES-FB and FAST systems was 0.82. It revealed that garment formability can be predicted from fabric mechanical properties by KES-FB and FAST systems. The garment formability of nylon breathable fabric was higher than that of PET one, and the garment formability of laminated breathable fabric showed the highest value compared to coated, dot and hot melt laminated breathable fabrics. It revealed that garment formability of breathable fabrics for sports-wear can be predicted from fabric mechanical properties and garment formability was dependent on the materials, finishing method and fabric structural parameters.

• Textile Coloration and Finishing
• /
• v.17 no.5 s.84
• /
• pp.26-36
• /
• 2005

This study was carried to evaluate mechanical characteristics of Poly(ethylene terephthalate) fabrics (by Kawabata evaluation system(KES)) which was systematically treated with $O_2$ low temperature plasma and chitosan acetate solution. Furthermore, surface structure was investigated by SEM, AFM, air permeability and wettability. Tensile energy(WT), shear rigidity(G) and surface roughness(MIU) properties calculated by KES-FB have increased with increasing plasma treatment time, while bending rigidity(G) and energy of compression(WC) value were decreased compared with those of the untreated. SEM photographs showed the identification of chitosan coating but did not confirm the plasma etching structure. Air permeability was decreased according to plasma treatment time with increasing concentrations of chitosan. The water absorption rate made rapid progress by chitosan treatment.

• Fashion & Textile Research Journal
• /
• v.23 no.5
• /
• pp.667-673
• /
• 2021

The purpose of this study was to obtain drape information and objective texture of fabrics easily and quickly by using a constructed fabric database. For the construction of the fabric database, 287 woven fabrics were examined by using the CLO fabric kit, KES-FB system, and drape test system. The k-means cluster analysis method was used to classify the fabrics into 7 grades. After correlation analysis of the fabric properties for each experiment, similar properties of the CLO fabric kit and KES-FB system were chosen, which were then designed to extract similar fabrics from the database. It was confirmed that inferring the drape information and objective hand feeling of fabrics was to some extent possible by extracting similar fabrics from the database. In this study, the primary hand and total hand value(THV) of KES-FB system, which was constructed by Kawabata and other experiments, were used to quantify the objective hand feeling, because they are the most widely used. However, these standards can be changed over time; in order to be applied within the clothing industry, these standards may have to be changed to some extent. Moreover, it is notable that although objective hand feeling cannot be expressed in the 3D virtual costume program, it can be easily derived from the constructed database. Additionally, it is expected that the existing 3D virtual costume program will express the costumes more realistically by improving these results.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.1
• /
• pp.159-174
• /
• 2020

We selected 100% cotton fabric, 100% Hanji yarn fabric and two kinds of cotton / Hanji yarn blended fabrics and fused them with three kinds of interlinings in order to examine changes to the physical properties and the post-adhesion physical properties of Hanji yarn blended fabrics. Changes in KES values were examined after fusing. First, EM, B, 2HB, MMD values of Hanji yarn blended fabrics were higher than cotton fabric, and LT, RT, G, 2HG, LC, WC values of cotton fabric were higher than Hanji yarn blended fabrics. Tensile recovery was lowered, bending stiffness was increased, and shear stiffness was lowered when Hanji yarn was mixed. Second, the KES value of LT, B, 2HB, G, 2HG, LC, WC increased after fusing, while the EM, MMD values decreased. SMD was shown to decrease or increase depending on the type of fabric. The adhesive effect on bending stiffness and shear stiffness due to the mixing of Hanji shows a different tendency in the comparison of α_B and α_G.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.1
• /
• pp.149-159
• /
• 2009

The purposes of this study are to evaluate physical performance of metallic Jacquard fabrics, and to contribute to the research and development of the women's suit made of the metallic Jacquard fabrics. First, eight fabrics were woven with two kinds of warp yarns(nylon and rayon) and weft yarn blended with various contents(0, 7, 14, 21%) of metallic yarn. Second, the mechanical properties were measured by using the KES-FB system, and physical properties such as tensile strength, tearing strength, abrasion resistance, drape, pilling, snagging, degree of crease resistance, flexural stiffness, specular gloss, folding endurance and electrostatic propensity were measured. The results were as follows. As the metal fiber content increased, bending, shear, thickness and weight increased, which imply low recovery of wrinkles. It means that metallic Jacquard fabrics enable to use as a memory fabric. 7% metallic Jacquard fabric showed a low value at total hand value, but there was little change. As the metal fiber content increased, tensile strength, tearing strength, drape coefficient, specular gloss and flexural stiffness increased, however the degree of crease resistance, electrostatic propensity and folding endurance decreased. The metallic Jacquard fabrics were excellent in snagging, abrasion resistance and pilling.

• Fashion & Textile Research Journal
• /
• v.19 no.3
• /
• pp.344-352
• /
• 2017

This study investigated the formability and appearance performance of 20 women's worsted fabrics. For this purpose, 10 foreign fabrics (9 Italian + 1 Japan fabrics) were prepared and 10 domestic worsted fabrics for women were made in Cheil woolen textile company for comparing with foreign fabrics. The mechanical properties of the 20 fabrics were measured using KES-FB and FAST systems; subsequently, fabric formability (F) and total appearance value (TAV) were calculated and compared with a virtual 3-D simulation silhouette by i-designer CAD system. The fabric formability of the domestic fabrics, calculated by KES-FB system, was lower than foreign fabrics, which was assumed to be caused by the stiff tactile property. The result was similar to that of the FAST system. Good wearing performance of the foreign worsted fabric was assumed to be caused by high extensibility and the compressibility of the fabrics. The TAV's of the domestic fabrics were also lower than foreign fabrics. Both the correlation between TAV and formability by the KESFB system and the correlation between TAV and formability by FAST system showed a good correlation coefficient. Fabric formability between KES-FB and FAST systems also showed a good correlation. The 3-D simulation silhouette of the foreign fabric by i-designer CAD system appeared superior to the domestic one, and assumed to be attributed to the low extensibility of the weft direction, stiff bending and high shear properties of the fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.3
• /
• pp.471-482
• /
• 1995

Using the acetate velvet and viscose velvet whose pile lengths were sheared as 1.45, 1.55, 1 65, 1.75, 1.85, 1.90mm under the condition equating the weaving process of ground fabric, the conclusions were as follows through the results of the sensory assessments estimated by women students in our university and the physical properties, H. V and T. H. V obtained by KES-F system. 1. In the sensory assessments estimated by the method of paired comparison and ranking of samples, the longer pile length was, the more the hand values of smoothness, softness, thickness, heaviness increased on the whole. 2. The H V. and T. H. V. measured by KES-F system were as follows; Kohi increased to pile length 1.85mm and then decreased a little at 1.90mm. hummer increased as pile length was longer. Fukurami increased to pile length 1.75mm and then decreased gradually as pile length was longer. Total hand value increased gradually from 1. 45mm to 1.85mm, had the top value at 1.85mm, and then decreased a little at 1.90mm. 3. In the results of summarizing $\ulcorner$the physical properties correlated closely with the H. V obtained by sensory assessments$\lrcorner$ and tithe Physical properties correlated closely with the H. V. and T. H. V obtained by KES-F systems, it showed that all the sensory properties correlated closely with compressive energy, flexural rigidity, thickness, weight and pile ratio in the former and that the physical properties correlated closely with each H V and T. H. V were different in the latter. 4. It showed that factor 1 was related to compressive energy, thickness, weight, pile ratio, factor 2 was related to recovery energy, compressive resilience, compressive index, and factor 3 was related to compressive recovery ratio in the result of factor analysis. 5. In the multiple repression analysis, the expressions of all sensory properties had compressive ratio, frictional coefficient in the regression expressions of $\ulcorner$H. V. obtained by sensory assessments$\lrcorner$, while the expressions of each H. V. and different physical properties in the regression expressions of $\ulcorner$H. V. obtained by KES-F system$\lrcorner$.

• Korean Journal of Human Ecology
• /
• v.15 no.2
• /
• pp.275-281
• /
• 2006

The purpose of this study is to investigate hand and sensibility of PET treated by Ultra-Violet (UV). The 4-channel PET knit fabric was treated by a self-made UV instrument in 5cm distance with different time frames-0min, 30min, and 90min. For hand evaluation, mechanical properties were measured by the KES-FB system. The environmental condition was controlled at 29$^{\circ}C$, 75% (R.H.)-summer standard climate. Twenty female students evaluated 'roughness', 'smoothness', 'wetness', 'stiffness', 'coolness', 'touch', 'preference', and 'comfort'. The outcomes of the experiment are as follows: The surface roughness of mechanical properties showed significant differences and the value of PET irradiated by UV for 90min was highest. The order of primary hand value such as NUMERI and FUKURAMI was in a following order-Untreated > 30min treated > 90min treated. Total hand value showed that PET irradiated by UV for 90min was appropriate for using summer fabric. The results of subjective sensibility were that the untreated and 30min treated PET were recognized as similar and had a good evaluation on 'comfort', 'preference' and 'the sense of touch'. This consequence disagreed with total hand value, because it was considered that subjects' hand sensibility was dependent on the feel of smoothness.

• Textile Coloration and Finishing
• /
• v.25 no.2
• /
• pp.140-151
• /
• 2013

In order to investigate the mechanical properties of working clothes materials considering industrial settings, the test weaving materials were compared with the existing materials depending on the season. The material design of the test fabrics were changed through fineness, composition, density of materials then subsequently treated with functional finish. As a result of evaluation of the forms according to KES-FB system, Koshi was deduced, and Numeri and Fukurami were increased. Thereby, the test weaving materials became flexible, surface became smoother, elasticity and volume characteristics indicated to have been improved. Consequently, the THV value of working clothes materials for test weaving was increased compared to existing materials which indicated improved result of the total hand value. Specially, the winter cloth material indicated improved drape characteristics and dimensional characteristics, showed improved liveliness as being compressed softly.

• Fashion & Textile Research Journal
• /
• v.8 no.3
• /
• pp.357-362
• /
• 2006

This study is to evaluate the objective sensibility of the commercial lining fabrics. Five kinds of the linings were collected by adding taffetas with four kinds of fibers (polyester, nylon, rayon, and acetate) to one polyester stretch fabric. The six basic mechanical and hand properties were studied by using KES-FB system (Kawabata Evaluation System). The result of measuring the mechanical properties shows that polyester has high bending rigidity (B), that polyester-stretch has a high value of linearity of load-extension curve (LT), tensile energy (WT), tensile resilience (RT), and coefficient of friction (MIU) and a low value of bending rigidity(B), shear property, and geometrical roughness (SMD). The nylon has a high value of bending rigidity (B), shear property, and compression resilience (RC). The rayon has a high value of coefficient of friction (MIU) and linearity of compression-thickness curve (LC) and a low value of shear property, and the acetate has a low value of shear property. The result of hand value shows that polyester, nylon, and acetate are a high value of KOSHI (stiffness), NUMERI (smoothness), and FUKURAM (fullness & softness), and they feel stiff and massive, that rayon has a low value of NUMERI and FUKURAMI. The total result of hand value shows that polyester taffeta and polyester stretch fabric are about the same as the best material for the lining of a woman's dress for spring and summer, and the next thing is acetate, but nylon and rayon are somewhat inferior materials. This provides a fundamental data for the comfortable clothing production of a higher value-added product through the study on the mechanical and hand properties of the lining as well as the right side of fabrics.