• Title/Summary/Keyword: KAIS TOOL

Search Result 373, Processing Time 0.02 seconds

An experimental study on the effect of V-ring position and die chamfer shape on the die roll height in fine blanking tool (파인 블랭킹 금형의 V-링 위치 및 다이 챔퍼 형상이 다이 롤 높이에 미치는 영향에 관한 실험 연구)

  • Kim, Jong-Deok
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.5
    • /
    • pp.2009-2014
    • /
    • 2012
  • It is very important to minimize the die roll height of gear, in order to maximize the shear cutting surface(tooth surface) of fine blanking. In this paper, the fine blanking tool sets were manufactured in order to study the die roll height according to V-ring position and die chamfer shape. They were constituted of the various die inserts and guide plate inserts with different die chamfer shape and different V-ring distance. The fine blanking experiment was conducted with the fine blanking tool sets and the die roll height of the gear samples was measured. It should be noted that die roll height on the fine blanked gear increased with increasing the V-ring distance and die chamfer angle.

Interoperability Test and Testing Tool for Railway Signaling System (철도신호시스템 상호운용성 검증 방법 및 지원도구의 개발)

  • Hwang, Jong-Gyu;Jo, Hyun-Jeong;Baek, Jong-Hyun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.9
    • /
    • pp.5802-5809
    • /
    • 2015
  • Railway signaling system is the vital control system in charge of the core for safely train operation, its functional safety must be checked through sufficient verification. Until now, to verify the interoperability of developed railway signaling system, the on-site testing approaches have been applied after testing in laboratory with simulator. This approaches are some limited range of interoperable verification, so more systematic verification interoperability is required. In this paper, the three phases of interoperability verification for railway signaling system was proposed, and methodology for each phases are represented. And also The interoperability validation methodology and supported testing tool for railway signaling system is represented in this paper

The Korea Development Trend of Unmanned Combat Vehicles in developed country (선진국의 무인전투차량 개발동향)

  • Hwang, Gwang-Tak;Gang, Shin-Woo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.15 no.4
    • /
    • pp.1831-1837
    • /
    • 2014
  • Unmanned combat vehicles is recognized as a key tool to utilize the military combat power in the area of science and technology. It can be expected to minimize the lose of human life and increase the military power. Unmanned combat systems are based on the complex operation concept and the unit system can be manufactured by combination on unmanned combat vehicles. For the unmanned combat systems, military power exists to sustain the acquisition establishment system and unmanned technology, which is considered to give the suitability such as application area.

A Development of Fabrication of Processes of SU-8 PR Mold for UV-LIGA (UV-LIGA 공정용 SU-8 PR 몰드 제작 공정 개발)

  • 김창교
    • Proceedings of the KAIS Fall Conference
    • /
    • 2002.11a
    • /
    • pp.238-242
    • /
    • 2002
  • 본 논문에서는 3차원 마이크로구조물을 위한 새로운 Thick Photoresist(TPR) 공정 기술을 개발하였다. 일반적으로 Thin Photoresist는 얇은 두께로 코팅을 할 수 있다. 그러나 SU-8과 같은 TRP은 몇 십 ㎛ 또는 그 이상으로 코팅이 가능하고 높은 종횡비를 얻을 수 있다. SU-8과 같은 TPR을 사용하여 마이크로구조물을 제작할 때 TPR의 crack들은 bake시의 갑작스런 tool down에 의한 stress에 의해 나타나는데, 이러한 crack들은 마이크로구조물의 도금을 어렵게 만든다. 본 논문에서는 TPR의 코팅, baking 시간 조절, cool down과 PEB(Post Expose Sake) 시간 조절을 통하여 stress에 의해 발생되는 crack이 없는 3차원 마이크로구조물을 제작할 수 있는 새로운 공정 기술을 개발하였다.

Design of Triple-band Internal antenna for Slide Type cell phone (Slide Type 휴대폰 3중 대역 내장형 안테나 설계)

  • Lim, Seung-Jin;Lee, Jea-Hoon;Kang, Hyun-Su;Seo, Sang-Hyuk;Son, Tae-Ho
    • Proceedings of the KAIS Fall Conference
    • /
    • 2009.12a
    • /
    • pp.977-980
    • /
    • 2009
  • 본 논문에서는 GSM/DCS/PCS대역에서 사용할 수 있는 변형된 IFA형태의 내장형 안테나를 설계하고 이를 제작하였다. 본 논문에서는 실제 상용화된 휴대단말기의 내장형 안테나를 3D Tool을 이용하여 전류 흐름의 상쇄작용을 고려하여 3중 대역을 형성시켰으며, Stub의 길이에 따라 변화하는 반사소실 특성을 확인하였다. 설계된 안테나를 제작 측정한 결과 기존의 안테나 보다 약 10.9%, 1.57dB 특성이 개선되었다.

  • PDF

Antenna Design using Automated Process (자동화 프로세스를 통한 안테나 설계)

  • Kim, Yong-Jin
    • Proceedings of the KAIS Fall Conference
    • /
    • 2009.12a
    • /
    • pp.645-648
    • /
    • 2009
  • 본 논문에서는 안테나 설계에 있어서 자동화 설계 프로세스를 제안하고자 한다. 안테나 설계는 최적화를 위한 반복적인 시뮬레이션 과정을 거쳐야 하며, 설계된 안테나의 실제 적용 시 튜닝 과정을 통한 시간이 많이 소요되는 경우가 있다. 본 논문에서는 유전자 알고리즘을 이용 하여 초기 안테나 모델 설계 시 안테나 설계자에게 사용 가능한 다양한 모델을 제시하며, 안테나 설계 시 중요 인자를 제시함으로써 초기 설계 및 방향설정의 시간을 줄이고자 한다. 사용된 최적화 알고리즘은 Non-dominated Sorting 유전자 알고리즘이며, 이 알고리즘은 multi-objective를 가지는 문제 해결에 적합한 알고리즘이다. 안테나 설계를 위한 EM computational tool로는 ESP V.5가 사용되었다. 시뮬레이션 결과를 통해 사용 가능한 적합한 안테나 모델을 제시하였다.

  • PDF

Design of Photovoltaic System for LED Lighting (LED 조명을 위한 태양광 시스템 설계)

  • Lee, Hoong-Joo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.12 no.1
    • /
    • pp.371-374
    • /
    • 2011
  • In this paper, a software development for design of the small photovoltaic system which is used to LED lighting is presented. For optimal design of photovoltaic systems, the operating power consumption of the LED load is considered to estimate the capacity of the solar module and battery. In order to give system design engineers a high ease of use, the software tool provides a graphical user interface and monitoring function to check operation of the system prior to installation.

Optimal Control System of Traverse Grinding (트래버스 연삭의 최적 제어시스템)

  • Choi, Jeongju
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.12
    • /
    • pp.5704-5708
    • /
    • 2012
  • In this paper, the algorithm to determine the optimal condition of traverse grinding is proposed by using differential evolution algorithm(DEA). The cost function to determine the optimal grinding condition is designed with considering process cost, production rate, surface roughness. Also, the constraint conditions for grinding such as thermal damage effect, machine tool stiffness, wear parameter of grinding wheel, surface roughness are considered. The algorithm is implemented with LabView software which is widely used at the industrial field. The performance of proposed algorithm is verified by comparing with the result of genetic algorithm(GA) through computer simulation.

Development of Cluster Tool Dispatching Algorithm for Next Generation Wafer Production System (차세대 웨이퍼 생산시스템을 위한 클러스터 툴 디스패칭 알고리즘 개발)

  • Hur, Sun;Lee, Hyun;Park, Eu-Gene
    • Proceedings of the KAIS Fall Conference
    • /
    • 2010.11b
    • /
    • pp.792-796
    • /
    • 2010
  • 차세대 반도체 공정인 450mm 웨이퍼 생산 환경의 가장 큰 특징은 반도체 생산의 전 공정에 대한 완전 자동화이다. 이러한 완전 자동화는 작업자의 공정개입을 불가능하게 하고 개별 웨이퍼의 중요도를 크게 증가시키며 전체 반도체 생산 공정에 대한 견고한 디스패칭 시스템을 필요로 한다. 또한, 차세대 반도체 공정의 디스패칭 시스템은 개별 웨이퍼에 대한 실시간 모니터링과 데이터 수집이 가능해야 하며, 수집된 반도체 공정의 정보를 반영한 실시간 디스패칭이 가능해야 한다. 본 연구에서는 차세대 반도체 환경인 450mm 웨이퍼 생산 환경에서 중요한 역할을 하는 클러스터 툴에 대해 분석하고 클러스터 툴에서 웨이퍼의 작업순서를 결정할 수 있는 디스패칭 알고리즘을 제안한다.

  • PDF

A Development of Comparison and Observation Tools for Protein 3D Structure (단백질 3차원 구조 비교 관찰 도구의 개발)

  • Oh, Se-Jong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.10 no.6
    • /
    • pp.1399-1406
    • /
    • 2009
  • Proteins are one of essential part of organisms; many proteins are enzymes that catalyze biochemical reactions and are vital to metabolism. Researching for 3D structure of proteins is important because functions of proteins are determined by 3D structure of them. In this study, we developed graphic tool that supports comparison and observation of the two proteins' 3D structure in the single screen. It also supports some comparison data to help researcher's easy comparison and observation works.