• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.817-825
• /
• 2017

The AC-common bus microgrid system can overcome several weaknesses of the DC microgrid system by interconnecting the DC/AC inverters used for renewable energy with an AC network. Nevertheless, the unbalanced loads inherent in the electric power systems of island and small communities can deteriorate the performance of the AC microgrid system. This is because of the limited voltage regulation capability and mixed power flow in the voltage source inverter. In order to overcome the unbalanced load condition, this paper proposes a voltage and current control algorithm for the 4-leg inverter based on the single phase d-q control method, as well as the modeling of the voltage controller using Matlab/Simulink S/W. From the S/W simulation and experiment of the 250KW proto-type inverter, it is confirmed that the proposed algorithm is a useful tool for the design and operation of the AC microgrid system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.153-163
• /
• 2018

There is insufficient effective management systems to achieve project goalsin disaster and safety R&D. Therefore, to develop an R&D performance management system, this paper develops a R&D performance management matrix based on PMBOK to systematize a process and to enhance efficiency of performance management. Also, this paper identified vulnerable procedures in disaster management by analyzing related laws, work process and performance. Analysis results found that the performance management matrix in disaster management R&D consists of 5 process groups, 7 knowledge areas and 47 processes. Also, the performance of the diffusion knowledge process was evaluated as weak in the present management system. This study defined ITO and developed a data flow diagram for applicationto related work. The suggestions of this study include the related work to enhance R&D performance, contribute to improving diffusion of R&D performance, and enhance the utilization of developed technologies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.294-302
• /
• 2020

In a genetic algorithm, computer simulations are performed based on the natural evolution process of life, such as selection, crossover, and mutation. The genetic algorithm searches the approximate optimal solution by the parallel arrangement of Schema, which has a short definition length, low order, and high adaptability. This study examined the possibility of improving the efficiency of the optimal solution by considering the characteristics of the building block hypothesis, which are one of the key operating principles of a genetic algorithm. This study evaluated the efficiency of the optimization results according to the gene sequence for the implementation in solving problems. The optimal design problem of the water pipe was selected, and the genetic arrangement order reflected the engineering specificity by dividing into the existing, the network topology-based, and the flowrate-based arrangement. The optimization results with a flowrate-based arrangement were, on average, approximately 2-3% better than the other batches. This means that to increase the efficiency of the actual engineering optimization problem, a methodology that utilizes clear prior knowledge (such as hydraulic properties) to prevent such excellent solution characteristics from disappearing is essential. The proposed method will be considered as a tool to improve the efficiency of large-scale water supply network optimization in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.476-484
• /
• 2020

Purpose: This study determined the intention of obtaining long-term work by graduate nursing students. Methods: The subjects were 116 students in the fourth year of the nursing department located in G city of G province and G city of J province. A structured questionnaire was used from November 1, 2018 to November 27, 2018 for data collection. The SPSS/WIN 21.0 program was used for the collected data and the data was analyzed by t-tests, one-way ANOVA, Pearson's correlation coefficients, and stepwise multiple regression analysis. Result: The major factors influencing the intention to work were satisfaction with their academic major (β=.54, p<.001), and the career after employment in a hospital) (β=.28, p<.001). The explanatory power was 46.5% (F=51.00, p<.001). Conclusion: To increase the satisfaction of studying nursing, it is necessary to apply various educational programs to positively recognize the nursing profession and a nurse's image and increase optimism and social efficacy. There is a need to develop a tool to measure the intention of obtaining long-term nursing jobs for nursing students in hospitals. This study suggested a way to increase the intention of obtaining long-term work by improving the degree of satisfaction with nursing profession.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.648-655
• /
• 2020

The firing pin of modern automatic rifles detonates the primer of loaded ammunition via a hammer. During this process, the firing pin receives an impact load and repetitive force throughout the life of the rifle. An endurance test of a rifle showed that the firing pin breaks prematurely at 96.26% of life. Accordingly, a case study was conducted through cause analysis and a reconstruction test. Optical microscopy and scanning electron microscopy of the broken surface of the firing pin showed that a crack began in the circumferential direction of the surface, resulting in a fatigue crack to the core after repeated impact. Crack growth and fatigue destruction occurred at the end due to the repetitive impact and was estimated using a notch. For verification, a sample that produced a 0.03mm circumferential notch was broken at 64.25% of life in the reconstruction test. A test of breakage according to the notch types showed that a 0.3mm and a 0.5mm one-side notch were broken at 66.53% and 50.76%, respectively, and a 0.03mm six-point notch was broken at 85.65%. The endurance life of a sample firing pin with a rough surface and tool mark was examined, but an approximately 381 ㎛ internal crack formed. Through this study, failure for each notch type was considered. These results show that quality control of the notch and surface roughness is essential for ensuring the reliability of a component subjected to repeated impact.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.80-90
• /
• 2011

The purposes of this study are clarifying the characteristics of women's hair style in the late Joseon Dynasty by inquiring into that hair style and, by extension, having a new understanding of the aesthetic consciousness of women in those times. The typical hair style of married Joseon women was Ungeonmeori and Jjokmeori, with Ungeonmeori being much more popular. Regardless of socioeconomic status, women used a big Gache as long as conditions permitted. Meanwhile, some women who led the trend or followed the national policy did Jjokmeori and wore Jokdoori. The Joseon Dynasty had a strict clothing system. However, giseangs were free from this restriction and they were free at attire. Therefore, they led the fashion trend. Both noble and common women followed the trend, imitating giseangs' attire. Women's hair style was used as a tool to express one's personality in the late Joseon Dynasty when the hierarchy was already weakened. In fact, it seems that women in those times cared more about hair style trend than clothing trend. This means that those women already had such a high quality of aesthetic consciousness that they showed their hair which is the closest to the face to advantage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.720-726
• /
• 2010

Haplotype-based research has become increasingly important in the field of personalized medicine since the haplotype reflects a set of SNPs (Single Nucleotide Polymorphisms) that are genetically associated and inherited together. Currently, the most widely used application softwares available for haplotype reconstruction, based on in silico method, include PL-EM, Haplotyper, PHASE and HAP. PL-EM, Haplotyper and PHASE are command-line application running on LINUX or Unix system and HAP is a web-based client-server application. This paper deals with an integrated haplotype reconstruction system that have been developed with PL-EM and Haplotyper selected from the accuracy test with experimentally verified data on public application softwares. This integrated system is a kind of client-sever one with user friendly web interface and can provide end-users with a high quality of haplotype analysis. SNPs genotype data with a length of 5 derived from 5 people and SNPs genotype data with a length of 13 derived from 15 people were used to test the analysis results of Haplotyper and PL-EM respectively. As a result, this system has been confirmed to provide the systematic and easy-to-understand analysis results that consist of two main parts, i.e. individual haplotype information and haplotype pool information. In this respect, the integration system will be utilized as a useful tool for the discovery of disease related genes and the development of personalized drugs through facilitating the reconstruction of haplotype maps.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7364-7371
• /
• 2014

Construction post-evaluation (CPE) boosts the efficiency of public construction projects by assessing the performance results of public construction projects and using the results to pursue similar projects. This evaluation comprehensively analyzes and assesses the planning of construction work, the estimated and actual construction costs, the construction period, the demand for construction projects, and the effects of construction projects after the construction work to ensure efficiency. The data was used to prevent lax project execution and enhance the quality and efficiency of similar construction projects. On the other hand, CPE results information must be managed systematically to refer to and use CPE data in similar construction projects. Therefore, in this study, the CPE system was developed as a measure of the systematic and comprehensive management and use of the CPE results information of individual ordering agencies. Therefore, the groundwork was laid for the assurance of quality enhancement and efficient project execution in public construction projects. This system is expected to serve as a useful tool for comprehensively analyzing and assessing construction works.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.23-30
• /
• 2017

In the AEC(Architecture, Engineering and Construction) industry, BIM(Building Information Modeling) technology not only helps design intent efficiently, but also realizes an object-oriented design including building's life cycle information. Thus it can manage all data created in each building stage and the roles of BIM are greatly expanded. Contractors and designers have been trying to adopt BIM to design competitions and validate it for the best result in various aspects. Via the computational simulation which differs from the existing process, effective evaluation can be done. For this process, a modeling guideline for each kind of BIM tool and a validation system for the confidential assessment are required. This paper explains a new process about design evaluation methods and process using BIM technologies which follow the new paradigm in construction industry through complement points by an example of a competition activity of the Korea Power Exchange(KPX) headquarter office. In conclusion, this paper provides a basic data input guideline based on open BIM for automatic assessment and interoperability between different BIM systems and suggests a practical usage of the rule-based Model Checker.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.4019-4023
• /
• 2014

This study examined the effectiveness of ultrasound on enhancing the dewaterability and volume reduction of bio solids from a waste treatment plant. The test specimen was obtained from a storage tank immediately before the dewatering process at a local treatment plant. The test conditions included the energy levels of ultrasonic waves and treatment time. The tests were undertaken using three types of different treatment processors (7 liter, 1 ton, 7 ton container). The capillary suction time (CST) and the viscosity of sludge, which is one of the influencing factors for dewaterbility, were obtained under various test conditions. The results showed that ultrasound increases the CST of the raw specimens, whereas a significant reduction (20 % of the maximum value) of CST occurred in the sample with ultrasound and flocculent. The decrease in viscosity reached 40 % of the maximum value. A centrifugal test was performed to examine the characteristics of the sludge settlement. The settling rate and time required to reach the final values were both enhanced by the ultrasonic energy. An ultrasonic treatment is potentially useful tool for reducing the amount of released sludge. To examine the possible use of field application, the real scale sonic processor was designed and operated. The results were similar (50 % of the maximum value) to those of laboratory experiments.