• 한국군사과학기술학회지
• /
• 제24권4호
• /
• pp.401-407
• /
• 2021

To confirm the change of muzzle velocity and the most suitable probability distribution model of the 155 mm K9 howitzer barrel with chrome plating and changed rifling. Using a statistical program, the muzzle velocity were plotted on a normal distribution, a 2-parameter and 3-parameter Weibull distribution on a probability paper. Also, statistical parameters were estimated and muzzle velocity fitness test and probability of K676 charge were plotted. In both the chrome-plated with standard rifling and changed rifling for K9 barrel, the 2-parameter and 3-parameter Weibull distribution were skewed to the left compared to the normal distribution. It was confirmed that the muzzle velocity of the K9 barrel with chromium-plated is suitable for the normal distribution and 3-parameter Weibull distribution model.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.12-19
• /
• 2006

A gun barrel of infantry fighting vehicle is supported like a type of cantilever. Temperature of a gun barrel is increased by heat transfer due to the combustion of propellant charge during the firing. Thus, the muzzle of a gun barrel is deflected in accordance with its temperature and the accuracy rate is decreased by deflection of the muzzle. In this study, deflection of a gun barrel is estimated by measuring its restoration rate because measuring the deflection rate is difficult due to the vibration of the gun barrel during the firing. In order to obtain the relations between deflection rate and restoration rate of the 40mm gun barrel of Next Infantry Fighting Vehicle(NIFV) under varying temperature, measurement of deflection rate and restoration rate is carried out using 5.56mm Remington rifle barrel. Effect of the estimated deflection rate of a gun barrel of NIFV on the hit probability is also analyzed.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권2호
• /
• pp.34-38
• /
• 2008

Commercially available magnetic barrel machines equipped with permanent magnets have certain limitations: work can only be finished effectively in limited areas of the container because permanent magnets are arranged two-dimensionally on the magnet disk. We overcame this problem by developing a new magnetic barrel machine equipped with a three-dimensional magnet arrangement. The effectiveness of the new machine has already been reported; this study improved the machine's polishing ability by changing the polarity of magnets on a magnet block. Polishing experiments confirmed the most effective arrangement of magnets on the magnet block. An alternating arrangement of north and south poles produced far superior polishing characteristics than a uniform arrangement of the same pole facing outward. Alternating polarity probably causes increased quantities of barrel media to work together. Finally, we introduced stronger permanent magnets to the magnet block, and found that the increased magnetic field also improved polishing ability.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.5-11
• /
• 2006

This paper is launched to get an exact bore-sighting value in the process of assembling for a dual-barrel weapon. Image processing method with a CCD(Charged Coupled Device) camera is chosen for the error reduction of bore-sighting. The results of this method by using a CCD camera and the testing target method are described in this paper. After the performance of the dual-barrel weapon and that of the fire-control system in the dual barrel weapon system is confirmed, the bore-sighting which is a part of the process in the system assembly is accomplished. In this process, the position of the barrel is identified by using the testing target method that is an existing bore-sighting method. Then, the fixing line of the fire-control system is checked by a day-optical part. The precision of the bore-sighting is required within several mils, however the manual method using the naked eyes makes it worse. Therefore, a CCD camera is installed in the eyepieces. Next, we can get an image of the sighting and the center coordinate values of the laser-pointer from each barrel by image processing method. A required bore-sighting value is calculated from the eccentricity of the center coordinate. Finally, It can be applied to adopt this result in the assembling process of the dual-barrel weapon.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1270-1275
• /
• 2013

A lot of research about camera calibration and lens distortion for wide-angle lens has been made. Especially, calibration for fish-eye lens which has 180 degree FOV(field of view) or above is more tricky, so existing research employed a huge calibration pattern or even 3D pattern. And it is important that calibration parameters (such as distortion coefficients) are suitably initialized to get accurate calibration results. It can be achieved by using manufacturer information or lease-square method for relatively narrow FOV(135, 150 degree) lens. In this paper, without any previous manufacturer information, camera calibration and barrel undistortion for fish-eye lens with over 180 degree FOV are achieved by only using one calibration pattern image. We applied QR decomposition for initialization and Regularization for optimization. With the result of experiment, we verified that our algorithm can achieve camera calibration and image undistortion successfully.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.505-510
• /
• 2012

A study of the recovery of tin and nickel from steel ball scraps for barrel plating was carried out through a physical treatment, a leaching treatment, hydrogen reduction and an electrolysis experiment. The recovery of the iron component was over 95% by the physical treatment. We obtained tin oxide in the form of metastannic acid ($SnO_2{\cdot}xH_2O$) with impurities of less than 5% from the leaching treatment. We also recovered the high-purity metallurgical tin at a rate that exceeded 99.9% by the electrolysis of crude tin obtained from the hydrogen reduction of metastannic acid.

• 전자공학회논문지
• /
• 제51권9호
• /
• pp.57-66
• /
• 2014

본 논문에서는 컬러 영상을 실시간 신호 처리 과정을 통해 보정하기 위한 낮은 복잡도의 배럴 왜곡 보정 프로세서의 구조를 제시하고, 이를 구현한 결과를 보인다. 제안하는 배럴 왜곡 보정 프로세서는 컬러 디모자이킹과 배럴 왜곡 보정 과정의 두 보간과정을 결합하여 하드웨어 복잡도를 낮추었다. 또한 배럴 왜곡 보정 과정의 공간적 지역성을 이용한 메모리 인터페이스를 설계하여 한 픽셀을 보정하는데 요구되는 메모리 대역폭을 크게 감소시켰다. 설계된 보정 프로세서는 $0.11-{\mu}m$ CMOS 공정을 사용하여 35K의 논리 게이트로 구현되었고, $2048{\times}2048$ 크기의 컬러 영상을 최대 606 MHz의 동작 주파수로 150 Mpixels/s의 속도로 보정할 수 있으며, 요구되는 메모리 대역폭은 1 read/correction이다.

• Journal of Ginseng Research
• /
• 제37권2호
• /
• pp.219-226
• /
• 2013

This study was conducted to investigate the effect of extrusion conditions (moisture content 20% and 30%, screw speed 200 and 250 rpm, barrel temperature $115^{\circ}C$ and $130^{\circ}C$) on the acidic polysaccharide, ginsenoside contents and antioxidant properties of extruded Korean red ginseng (KRG). Extruded KRGs showed relatively higher amounts of acidic polysaccharide (6.80% to 9.34%) than non-extruded KRG (4.34%). Increased barrel temperature and screw speed significantly increased the content of acidic polysaccharide. The major ginsenosides (Rb1, Rb2, Rc, Rd, Re, Rf, Rg2s, Rg3s, Rh1, and Rg3r) of KRG increased through extrusion, while the ginsenoside (Rg1) decreased. The EX8 (moisture 30%, screw speed 250 rpm, and temperature $130^{\circ}C$) had more total phenolics and had a better scavenging effect on 2,2-diphenyl-1-picrylhydrazyl radicals than those of extruded KRG samples. The extrusion cooking showed a significant increase (6.8% to 20.9%) in reducing power. Increased barrel temperature significantly increased the values of reducing power, the highest value was 1.152 obtained from EX4 (feed moisture 20%, screw speed 250 rpm, and temperature $130^{\circ}C$). These results suggest that extrusion conditions can be optimized to retain the health promoting compounds in KRG products.

• International Journal of Fluid Machinery and Systems
• /
• 제9권4호
• /
• pp.325-331
• /
• 2016

A bathtub vortex above the outlet of a rotating barrel is simulated. By analyzing the Ekman layer theory, it can be found that the main flow circulation is inversely proportional to the thickness of Ekman layer. The thicker the Ekman boundary layer, the weaker the rotational strength and the shorter of the length of gas core is. According to this law, models of barriers with rods of different heights are established. The reduction of air-core length in this air entrainment vortex and weakening the strength of rotation field were achieved.

• 전자공학회논문지
• /
• 제52권9호
• /
• pp.36-44
• /
• 2015

본 논문에서는 광각 카메라에서 발생하는 비네팅 왜곡과 배럴 왜곡을 효율적으로 보정하기 위한 낮은 복잡도의 프로세서를 제안하고, 이를 구현한 결과를 보인다. 제안하는 프로세서에서는 비네팅 왜곡과 배럴 왜곡 보정 시 복잡한 연산을 수반하는 고차 다항식과 같은 피팅 함수를 구간 선형 근사하여 보정 품질을 유지하면서도 연산 복잡도를 크게 낮추었다. 이를 기반으로, 배럴 왜곡과 비네팅 왜곡을 중첩적으로 보정하도록 설계하여 전체적인 하드웨어 복잡도를 낮추었다. 제안하는 프로세서는 $0.11{\mu}m$ CMOS 공정을 사용하여 18.6K의 논리 게이트로 구현되었으며, $2048{\times}2048$ 크기의 영상에 대하여 최대 200Mpixels/s의 속도로 보정이 가능하다.