• Journal of Photoscience
• /
• v.8 no.1
• /
• pp.13-17
• /
• 2001

Cucumber leaves subjected to light chilling stress exhibit a preferential inactivation of photosystem(PS) I relative to PSII, resulting in the photoinhibition of photosynthesis. In light chilled cucumber leaves, Cu/Zn-Superoxide dismutase(SOD) is regarded as a primary target of the light chilling stress and its inactivation is closely related to the increased production of reactive oxygen species. In the present study, we further explored that inactivation of PSI in cucumber leaves is not a light chilling specific, but general to various oxidative stresses. Oxidative stress in cucumber leaves was induced by treatment of methylviologen(MV), a producer of reactive oxygen species in chloroplasts. MV treatment decreased the maximal photosynthetic O$_2$ evolution, resulting in the photoinhibition of photosynthesis. The photoinhibition of photosynthesis was attributable to the decline in PSI functionality determined in vivo by monitoring absorption changes around 820 nm. In addition, MV treatment inactivated both antioxidant enzymes Cu-Zn-superoxide dismutase and ascorbate peroxidase known sensitive to reactive oxygen species. From these results, we suggest that chloroplast antioxidant enzymes are the primary targets of photooxidative stress, followed by subsequent inactivation of PSI.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.1
• /
• pp.29-33
• /
• 1986

This paper aims at finding out the optimum operating condition to reduce fuel consumption for the training ship Pusan 402 with controllable pitch propeller. For this purpose, this paper examints the variation of ship speed and fuel consumption in accordance with the change of engine revolution and propeller pitch. The results obtained are as follows: 1. When engine revolution is constant, the ship speed sluggishly increases according to the increase of propeller pitch but fuel consumption extremely increases. The higher revolution the engine is, the more remarkable this tendency is. 2. As the engine revolution becomes lower, the fuel consumption per mile decreases. Howt.er = the fuel consumption under the same engine revolution differs according to the propeller pitch. 3. Specific fuel consumption is uniformed about 180g/ps.h at any case of load. 4. Among the various operating conditions which yield the same ship speed, fuel consumption lowers in the case of lower engine revolution and larger propeller pitch.

• The Journal of Korean Medicine
• /
• v.37 no.2
• /
• pp.104-109
• /
• 2016

Objectives: A 74-year-old male patient with unresectable advanced gastric cancer (clinical initial stage T3N+, Borrmann type III) admitted due to gastric bleeding at tumor site. On first admission day, hemoglobin level was 5.7g/dl and performance status was grade 3 according to Eastern Cooperative Oncology Group Performance Status(ECOG-PS). After performing red blood cell transfusion as an emergency treatment, hemoglobin level was increased up to 9.5g/dl. However, bleeding of oozing site was continued. For hemostasis, decoction of notoginseng radix (30g/day) was administered since day 7 after admission. The dose was elevated to 40g/day after hemoglobin level was decreased to 6.5g/dl on day 11. Since then, melena was stopped and hemoglobin level was maintained over 9.1g/dl. This case shows the hemostasis effect of decoction of notoginseng radix on gastric bleeding in unresectable advanced gastric cancer.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.2225-2228
• /
• 2012

Background: We assessed the efficacy and toxicity of ifosfamide and doxorubicin combination chemotherapy (CT) regimen retrospectively in Turkish patients with recurrent or metastatic nasopharyngeal carcinoma (NPC) previously treated with platinum-based chemotherapy. Methods: A total of thirty patients who had received cisplatin based chemotherapy/chemoradiotherapy as a primary treatment received ifosfamide 2500 $mg/m^2$ days 1-3, mesna 2500 $mg/m^2$ days 1-3, doxorubicin 60 mg/m2 day 1 (IMA), repeated every 21 days. Eligible patients had ECOG PS< 2, measurable recurrent or metastatic disease, with adequate renal, hepatic and hematologic functions. Results: Median age was 47 (min-max; 17-60). Twenty six (86.7 %) were male. Median cycles of chemotherapy for each patient were 2 (range:1-6). Twenty patients were evaluable for toxicity and response. No patient achieved complete response, with nine partial responses for a response rate of 30.0% in evaluable patients. Stable disease, and disease progression were observed in five (16.7%) and six (20.0%) patients, respectively. Clinical benefit was 46.7%. Median time to progression was 4.0 months. Six patients had neutropenic fever after IMA regimen and there were one treatment-related death due to tumor lysis syndrome in first cycle of the CT. No cardiotoxicity was observed after CT and treatments were generally well tolerated. Conclusion: Ifosfomide and doxorubicin combination is an effective regimen for patients with recurrent and metastatic NPC. For NPC patients demonstrating failure of cisplatin based regimens, this CT combination may be considered as salvage therapy.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1415-1417
• /
• 2003

Yoneyama 등이 2001년 기존의 potentiometry 형의 요소 센서보다 우수한 성능을 갖는ampeometry 정의 요소 센서를 제안한 이후, 전자 전달 메커니즘에 관한 관심이 집중되어 왔으나, urease로부터 전극 기질까지의 전자 전달 매질로서 전도성 고분자보다 쉽고 단순한 공정은 아직까지 제시된 바 없다. 본 논문에서는 전도성 고분자로서 polypyrrole(PPy)과 poly(3-methylthiophene)(P3MT)을 이용하여 다공성 실리콘(PS) 요소 센서를 제작하고 각각의 특성을 전기화학적으로 분석하였다. Urease 고정화 전압, 고정화 시간, 고정화 시의 효소 농도, 수소이온 농도 등이 감도에 미치는 영향은 PPy 와 P3MT 각각의 경우 유사한 경향성을 보였다. 감도 특성의 경우, PPy는 다공질 실리콘 전극과 평면 전극 각각에 대하여 1.55 ${\mu}A/mM{\cdot}cm^2$와 0.91 ${\mu}A/mM{\cdot}cm^2$였고, P3MT의 경우는 각각 8.44 ${\mu}A/mM{\cdot}cm^2$와 4.28 ${\mu}A/mM{\cdot}cm^2$의 감도를 보였다. 즉, PPy가 P3MT 보다 일반적으로 높은 감도를 보였고, 다공질 실리콘 전극을 사용하는 경우, 그렇지 않은 경우보다 약 2배외 감도 향상 효과를 기대할 수 있었다. 재현성이나 안정성의 경우는 P3MT 가 PPy 보다 우수하였다. 사용 빈도에 따른 감도 저하는 다공질 실리콘 전극의 경우 직선적으로 감소하셨으나 평면 전극의 경우는 지수함수적으로 감소하였다 시간에 따른 감도 저하 현상은 만15일 이후의 감도를 기준으로 하여, 10% 미만의 감도저하를 보임으로써 PPy, P3MT 모두 우수한 특성을 보였다.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.17
• /
• pp.7589-7594
• /
• 2015

Background: MicroRNAs (miRNAs) are small non-coding RNA molecules, implicated in several activities like initiation, progression and prognosis of various cancers. Single nucleotide polymorphisms (SNPs) in miRNA genes can lead to alteration in mRNA expression, resulting in diverse functional consequences. The aim of our study was to investigate the association of miR-149C>T and miR-196a2C>T SNPs with susceptibility to development of oral squamous cell carcinoma (OSCC) in South Indian subjects. Materials and Methods: 100 OSCC patients and 102 healthy controls from the general population were recruited for the study. Genetic analysis was performed by polymerase chain reaction/restriction fragment length polymorphism (PCR/RFLP) as per a standard protocol. Results: The genotype frequencies in miR-196a2 polymorphism, of TT, CT and CC in the OSCC patients were 69%,10% and 22% respectively while for control group it was 80%, 15% and 5% respectively. The CC genotype of miR196a2 polymorphism was significantly associated with oral squamous cell carcinoma. The genotype frequencies in miR-149 polymorphisms of CC, CT and TT in the oral squamous cell carcinoma (OSCC) patients were 72%, 22% and 6% respectively and for control group 88%, 12% and 0% respectively. CT and TT genotypes of miR149 polymorphism were found to be significantly associated with OSCC (p = 0.05 and 0.07). Conclusions: Our study suggests that miR-196a2C>T and miR-149C>T polymorphisms may play crucial roles in the development of OSCC in South Indian subjects.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1350-1352
• /
• 2003

For developing a 100 kW MCFC power generation system, Several design parameters for a fuel cell stack and system analysis results by Cycle Tempo, a processing computer soft ware, were described. Approximately two substacks with 90 cells are required to generate 100 kW at a current density of $125\;mA/cm^2$ with $6000\;cm^2$ of cells. An overall heat balance was calculated to predict exit temperature. The 100 kW power is expected only under pressurized operation condition at 3 atm. Recycle of cathode gas by more than 50% is recommended to run the stack at $125\;mA/cm^2$ and 3 atm. Manifolds should be designed based on gas flow rates for the suggested operating condition. The fuel cell power generation system was designed conceptually with several choices of utilization of anode exhaust gas. To operate and evaluate the MCFC system, control and measurement system and operation mode are designed before 100 MCFC system construction. In system control schematics, OS, PLC and MMI were consisted and have roles for MCFC system control. For operation of 100 kW MCFC system, NS, PS PR mode were considerated step by step and simulated.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.138-146
• /
• 2018

Photodynamic therapy (PDT) is a great potential approach for the localized tumor removal with fewer metastatic potentials and side effects in treating the disease. In the treatment process, a photosensitizer (PS) that absorbs a light energy to generate reactive oxygen is essential. In general, a visible light is used as a light source of PDT, so that side effects from the light source are inevitable. For this reason, upconversion nanoparticles (UCNPs) using near-infrared (NIR) as an excitation source are attracting attention in the field of disease diagnosis and treatment. UCNPs have the low cytotoxicity and phototoxicity, and also advantages such as deep tissue penetration and low background autofluorescence. For PDT, UCNPs should be combined with a PS which absorbs the light energy from UCNPs and transfers it to the surrounding oxygen to produce reactive oxygen. In addition, the therapeutic efficacy can be improved by modifying nanoparticle surfaces, adding anti-cancer drugs, or combining with photothermal therapy (PTT). In this review, we summarize the recent research to improve the efficiency of PDT using UCNPs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.4
• /
• pp.471-476
• /
• 1998

Microbiological spoilage of marine fish is complex process occurring by bacteria, yeasts and molds. There have been rare study for saprophytic yeasts although having enormous numbers of bacteriological studies on the spoilage of marine fish. The 14 genera of yeasts isolated from mackerel (Scomber japonicus) with high frequency of occurrence were Candida sp., Rhodotorula sp., Torulopsis sp., Cryptotoccus sp. and Tricosporon sp. Among these ones Candida lipolytica was identified as the strongest proteolytic yeast, then named Candida lipolytica FM5 (C. lipolytica FM5). C. lipolytica FM5 showed optimum growth at $25^{\circ}C$, pH 7.0 and could grow at $5^{\circ}C$ and in medium containing $10\%$ sodium chloride, To evaluate the saprophytic activity of the selected strain, C, lipolytica FM5 and Pseudomonas fluorescens ATCC 17571 which is one of representative spoilage bacteria were individually inoculated into the sterilized fish muscle homogenates, and then pH changes and volatile basic nitrogen (VBN) values were checked during the storage at various temperatures. According to the experimental results, the productions of VBN by C. lipolytica FM5 in the fish muscle homogenates were 50 mg-N/100 g at $5^{\circ}C$, 152 mg-N/100 g at $15^{\circ}C$ and 379 mg-N/100 g at $25^{\circ}C$ for 1 week storage, respectively. Above results were nearly same as in case of Ps. fluorescens ATCC 17571 inoculation. It suggest that sapyophytic yeasts also have important role in spoilage of marine fish.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.59-70
• /
• 2011

Even though we could not count the total amount of plates in Korean printing industry per year, we would suppose the total amount of plates about $20,000km^2$ to $22,000km^2$ per year through our printing experience. On the standard of the end of 2010, it would be the market share of plates are that CTP plate is $9,000km^2$, CTcP plate is$4,000km^2$ and PS plate is $9,000km^2$, such as total amount of plates are $22,000km^2$. When there was no installed CTP setter in Korea, the domestic plate would be over 60% market share of plate in Korean printing industry. But now it would be less than 25% market share of plate. It is necessary to develop domestic CTP thermal plate from now because we have to keep the market share of domestic plate. On the study of the surface structure of substrate, roughness, anodized layer amount and coating amount between domestic CTP thermal plate and foreign CTP thermal plate, it would be the basic to develop domestic CTP thermal plate.