• Transactions of Materials Processing
• /
• v.16 no.1 s.91
• /
• pp.54-60
• /
• 2007

Optimum injection molding condition for a box mold was searched by the Response Surface Analysis(RSA) with the aid of process monitoring system(PMS). Process variables on the control panel of the injection molding machine such as barrel temperatures, screw speed profile, holding pressures, etc. cannot guarantee the uniformity of the material variables directly related with the state of the product in the mold cavity. In order to make sure the state of the resin in the cavity, pressures and temperatures in the cavity, runner and nozzle were monitored in the experiment with the PMS. To accomplish the consistency of the molding process, dependent variables such as the switchover point and holding time were searched with the PMS. With a proper objective function about deflection of the box-type product, the optimum injection molding condition was obtained.

• Journal of Multimedia Information System
• /
• v.3 no.2
• /
• pp.1-8
• /
• 2016

In this paper, we propose a method to automatically diagnose various diseases. The input data consists of electrocardiograph (ECG) recordings. We extract R-to-R interval (RRI) signals from ECG recordings, which are preprocessed to remove trends and ectopic beats, and to keep the signal stationary. After that, we perform some prospective analysis to extract time-domain parameters, frequency-domain parameters, and nonlinear parameters of the signal. Those parameters are unique for each disease and can be used as the statistical symptoms for each disease. Then, we perform feature selection to improve the performance of the diagnosis classifier. We utilize the selected features to diagnose various diseases using machine learning. We subsequently measure the performance of the machine learning classifier to make sure that it will not misdiagnose the diseases. The first two steps, which are R-to-R extraction and preprocessing, have been successfully implemented with satisfactory results.

• Journal of Korean Society for Quality Management
• /
• v.38 no.4
• /
• pp.512-520
• /
• 2010

This research is the analysis of using structural equation method in order to investigate the cause and effect relationship among the elements related to the innovation activity and the degree of the influence on that, and in order to make sure the sequential processes into the meaningful management performance for improving the efficiency and effectiveness of a various of innovation activities performing in the domestic small and medium enterprise. To perform this research, we surveyed CEOs, managers, workers working for manufacturing business, we distributed 250 sheets totally and withdrew 206 sheets. we analyzed 169 sheets that we could use for this research using SPSS 15.0 and AMOS 18.0 program.

• Journal of Welding and Joining
• /
• v.31 no.4
• /
• pp.28-33
• /
• 2013

The effects of laser welding beam quality is very large. However, not an analysing case was found for the difference on the plasma emission signal during laser welding according to the beam quality. Therefore, in this study, we compared and evaluated penetration and signal change according to the beam quality at the a similar wavelength band by using a fiber laser and Nd:YAG laser. In addition, we took high speed videography in order to make sure that FFT analysis reflects the actual motion period of keyhole and found the period of video analysis and FFT mostly matched. As a result, it is expected to secure higher reliability than evaluating signal intensity when appling FFT to monitoring.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2521-2523
• /
• 1998

Freestanding flexible microstructures fabricated from deposited thin films become mechanically unstable when internal stresses exceed critical values. The residual stress and stress gradient of aluminum thin film were examined to make sure of fabricating the reproduceable aluminium structure. For good shape of micro mirror array and microstructures, the experiment was done varying thickness and deposition rate. As the aluminium film thickness increased from 0.8${\mu}m$ to 1.6${\mu}m$, the stress gradient decreased from 11.62MPa/${\mu}m$ to 2.62MPa/${\mu}m$. The residual stress values are from 42.4MPa to 62.24MPa of tensile stresses.

• Structural Engineering and Mechanics
• /
• v.52 no.3
• /
• pp.525-540
• /
• 2014

The Lyapunov exponent and moment Lyapunov exponents of Hill's equation with frequency and damping coefficient fluctuated by correlated wideband random processes are studied in this paper. The method of stochastic averaging, both the first-order and the second-order, is applied. The averaged $It\hat{o}$ differential equation governing the pth norm is established and the pth moment Lyapunov exponents and Lyapunov exponent are then obtained. This method is applied to the study of the almost-sure and the moment stability of the stationary solution of the thin simply supported beam subjected to time-varying axial compressions and damping which are small intensity correlated stochastic excitations. The validity of the approximate results is checked by the numerical Monte Carlo simulation method for this stochastic system.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.5
• /
• pp.1266-1272
• /
• 2016

Phospholipase C is a key enzyme of signaling pathways hydrolyzed phosphatidylinositol 4,5-bisphosphate to generate 2 second messengers. Among the PLC, $PLC-{\beta}$ subfamily consisted of 4 isoforms, $PLC-{\beta}$ 1~4. Here, we studied the tissue specific expression of $PLC-{\beta}3$ in olive flounder (Paralichthys olivaceus) following external stimulation like lipopolysaccharide (LPS), concanavalin A (ConA) and environmental stress compared with the inflammatory cytokines IL-1b. $PoPLC-{\beta}3$ gene transcripts has the effect in stimulated tissue compared to control. These results provide what we sure to be a important role for $PLC-{\beta}3$ activity in tissue and verify $PLC-{\beta}3$ as potential immune enzyme for signal transduction.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.174-176
• /
• 1993

Laying up homogeneous power cable in the earth. we sure that one of the most effectest fact is the rising of thermal resistivity. Today, system designing of in and outdoor project, calculating current carrying capacity totally depend on standard of JCS-168D and IEC-287 to applicate. Specially, the formula of calculating soil thermal resistivity is what is based on KENELLY,s is usually used. In this report, Let's study the formula of soil thermal resistivity which was born in the idea of KENELLY.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1669-1671
• /
• 2005

This paper presents an effective modeling scheme of SPE cell system for hydrogen production. PSCAD/EMTDC model of SPE cell system for hydrogen production to efficiently utilize Solar cell energy which produces effectively hydrogen energy is showed in this paper. The simulated results are then verified by comparing them with the actual values obtained from the data acquisition system. Authors are sure that it is a useful method to the researchers who study SPE cell system for hydrogen production.

• Journal of Society of Preventive Korean Medicine
• /
• v.16 no.3
• /
• pp.107-117
• /
• 2012

Objective : Processing of medicinals are one of the most important part in medicinal treatment. However, in text books, there are disagreements and several terms with same meanings. Method : We tried to compare the processing of medicinals in text book, Bonchohak especially in exterior-releasing medicinal and heat-clearing medicinal. Results : The terms of processing of medicinals in introductions of text book, Bonchohak are different from those in an itemized discussion of exterior-releasing medicinal and heat-clearing medicinal. Conclusion : The terms of processing of medicinals in text book, Bonchohak should be reorganized and improved to make be clear and sure as a text book.