• Journal of Internet of Things and Convergence
• /
• v.6 no.2
• /
• pp.25-29
• /
• 2020

The elliptic curve crypto-algorithm is widely used in authentication for IoT environment, since it has small key size and low communication overhead compare to the RSA public key algorithm. If the scalar multiplication, a core operation of the elliptic curve crypto-algorithm, is not implemented securely, attackers can find the secret key to use simple power analysis or differential power analysis. In this paper, an elliptic curve scalar multiplication algorithm using a randomized scalar and an elliptic curve point blinding is suggested. It is resistant to power analysis but does not significantly reduce efficiency. Given a random r and an elliptic curve random point R, the elliptic scalar multiplication kP = u(P+R)-vR is calculated by using the regular variant Shamir's double ladder algorithm, where l+20-bit u≡rn+k(modn) and v≡rn-k(modn) using 2^lP=∓cP for the case of the order n=2^l±c.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.960-961
• /
• 2008

본 논문에서는 직선 및 곡선구간에서 구동력을 필요로 하는 LCD 패널 생산라인의 이송장비인 OHS 시스템에 적용이 가능한 횡자속 선형전동기의 제어에 관하여 기술한다. OHS 시스템은 클린룸 내에서 이송대차가 천장에 레일과 함께 설치되어 장거리의 직선 및 곡선 이송경로를 가지는 LCD 패널 물류 이송장치이다. 기존 선형전동기들은 그 구조상 곡선구간 구동원으로 적용하기 어렵고, 장거리 이송용으로 사용하기에 상당한 가격적인 부담이 발생된다. 따라서 본 논문에서는 상대적으로 다른 선형전동기와 비교하여 가격적인 부담이 적고, 곡선구간에서 구동력을 발휘할 수 있는 횡자속 선형전동기를 OHS 시스템에 적용하고, 선형전동기의 곡선구간에서의 출력특성을 분석하며, 이동자의 위치검출 방법 및 제어 알고리즘을 제안한다. 제안한 방법은 실제 제작된 OHS 실험장치를 통하여 제어특성을 검증한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.812-815
• /
• 2002

The shape of K-R curve for an ideally brittle material is flat because the surface energy is an unvaried material property. However, the K-R curve can take on a variety of shapes when nonlinear material behavior accompanies fracture. By the way, a general metallic material is nonlinear, structural steel is such. Therefore, the J-R curve form J-integral value instead of K parameters can be used to evaluate elastic-plastic materials with flaws in terms of ductile fracture that can be significant to design. In this paper, R-curve behaviors form K and J parameter is considered for the precise assessment of fracture analysis, in case of JS-SS400 steels.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.757-764
• /
• 2014

In this study, the effect of shape parameters on the J-R curves of curved CT specimens was evaluated using the limit load method. Fracture toughness tests considering the shape factors L/W and $R_m/t$ of the specimens were also performed. Thereafter, the J-R curves of the curved CT specimens were compared using the J-integral equation proposed in the ASTM (American Society for Testing and Materials) and limit load solution. The J-R curves of the curved CT specimens were also compared with those of the CWP (curved wide plate), which is regarded to be similar to real pipe and standard specimens. Finally, the effectiveness of the J-R curve of each curved CT specimen was evaluated. The results of this study can be used for assessing the applicability of curved CT specimens in the accurate evaluation of the fracture toughness of real pipes.

• Nuclear Engineering and Technology
• /
• v.19 no.3
• /
• pp.169-179
• /
• 1987

The change of material J-R (J-T) curve with crack extension and J-calculation method was investigated to give experimental and analytical method for reliable J-R (J-T) curve, which was adapted recently as a tool for instability analysis of Nuclear Pressure Vessel. Experiments were carried out by Single Specimen Unloading Compliance Method using 1/2"T, Compact-Tension Type fracture mechanic specimens which were the same size and material as domestic nuclear pressure vessel material surveillance specimens. The results revealed that crack extension up to 25~30% of initial uncracked ligament and JD (Deformation theory J) calculation method, currently being used in NUREG-0744, could give rather reliable material J-R (J-T) curve than the small crack extension and JM (Modified J) calculation method. But as JM results more or less higher J at instability, the application of JM should be considered regarding to the problem of power plant availability.lity.

• Journal of the Korea Computer Graphics Society
• /
• v.7 no.3
• /
• pp.1-7
• /
• 2001

We present an efficient and robust algorithm to parametrize a perspective silhouette curve of a canal surface. We also detect each connected component of the silhouette. A canal surface is an envelope surface of a moving sphere with varying radii, which is defined by the center trajectory C(t) and radius function r(t) of the moving sphere. A canal surface can be decomposed to a set of characteristic circles. We derive the equations for the silhouette points on each characteristic circle, then parameterize the silhouette curve by using the equation. The sphere $S(t_*)$ with center point $C(t_*)$ and radius $r(t_*)$ intersects with the canal surface at a characteristic circle $K(t_*)$. The perspective silhouette of the sphere $S(t_*)$ from given view point consists of a circle $Q(t_*)$. By finding the values of t at which K(t) and Q(t) tangentially intersect, we detect each connected component of the silhouette curve.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.840-842
• /
• 2000

DC모터의 T-N(토크-회전수)특성이 선형성을 갖는다는 사실은 널리 알려져 있다. 더욱이 인덕턴스가 작은 소형 모터의 경우에는 T-N특성이 거의 직선에 가깝게 된다. 그러나 대형모터일수록 인덕턴스가 커지므로 이 인덕턴스의 영향으로 T-N특성은 비선형의 곡선으로 변하게 된다. 이렇게 되면 모터의 출력은 직선으로 예측하였을 때 보다 실제적으로 작은 출력이 발생하게 된다. 따라서 일반적으로 DC모터를 설계할 때 T-N특성의 비선형화로 인한 출력의 감소현상을 고려하여 임의의 여유를 주고 설계하여 왔다. 그러나 효율적인 모터설계를 위하여서는 임의의 여유가 아닌, 이론적 계산에 의한 정확한 T-N특성의 곡선을 필요로 하게 된다. 하지만 아직까지 이를 위한 용이한 계산법은 마련되어 있지 않다. 따라서 본 논문에서는 matlab을 이용하여 DC모터의 비선형 T-N곡선의 계산법을 도출하여 그 방법을 제시하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.539-546
• /
• 2016

In this paper, the effect of J-R curve changes on the determination of parameters in a failure model owing to the presence or absence of a side groove in a C(T) specimen is investigated. A stress-modified fracture strain model is implemented for FE damage simulations. C(T) specimens were taken from SA508 grade 1a low-alloy steel piping material, and some of them were processed with a side groove. Fracture toughness tests were performed at room temperature and at $316^{\circ}C$. The parameters of the failure model were determined by damage simulations using the J-R curves obtained from the tests. Finally, the results show that the determination of failure model parameters is not affected by variations in J-R curves owing to the presence or absence of a side groove.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.98-105
• /
• 2002

Some materials exhibit a rising K-R curve, while the K-R curve for other materials is flat. The shape of the K-R curve depends on material behavior and, to a lesser extent, on the configuration of the cracked structure. The K-R curve for an ideally brittle material is flat because the surface energy is an invariant material property. However, the K-R curve can take on a variety of shapes when nonlinear material behavior accompanies fracture. Five different hot-rolled thin plates are tested to investigate K-R curve behavior. A special experimental apparatus is used to prevent specimens from buckling.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.7
• /
• pp.729-736
• /
• 2015

In this study, the effects of specimen size and side-groove on the results of the J-R test for leak-before-break (LBB) evaluation were investigated. A series of J-R tests were conducted at both RT and $316^{\circ}C$, using three different sizes of compact tension (CT) specimens machined from SA508 Gr.1a piping material: 12.7 mm-thick 1T-CT, 25.4 mm-thick 1T-CT, and 25.4 mm-thick 2T-CT with and without side-groove. The results showed that side-grooving reduced the J-R curve for all specimens and the effect of side-grooving was more significant at $316^{\circ}C$ than at RT. As the thickness of the specimens decreased and the width of the specimens increased, the J-R curve slightly decreased at RT but it increased at $316^{\circ}C$. However, the variation in the J-R curve of SA508 Gr.1a with the thickness and width of CT specimen was insignificant.