• 한국의류산업학회지
• /
• 제8권1호
• /
• pp.134-138
• /
• 2006

The washing efficiency of two types of washing machine- drum(drum washing) and drum using steam jet system(steam drum washing) was studied. The purpose of this paper is to clarify the performance of new steam drum washing. The relationship between washing temperature and washing efficiency(reflectance(%)) by soil removal, and that between washing temperature and electric energy consumption, Fabric damage evaluated by Danish wear method, Fabric shrinkage(%) during laundering were investigated, and compared with those in drum washing machine. Washing efficiency of steam drum washing according to washing temperature is better than that of drum washing. Electric energy consumption and fabric damage in steam drum washing are lower than those of drum washing. Fabric damage increased as washing temperature increased. Shrinkage of fabrics in steam drum washing and drum washing are about same. Therefore, we assumed that in the case of steam drum washing using steam jet system, washing efficiency remarkably increased, and fabric damage decreased, even with a lot of saving in given electric energy and water used.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.770-771
• /
• 2015

본 논문에서는 발전소 전기설비 및 구축비용의 상당부분을 차지하는 케이블의 손실자원을 최소화하고, 효율적인 케이블 자재관리가 가능한 케이블 드럼 스케줄링 자동화를 제안하고 구현하였다. 구현된 케이블 드럼 스케줄링은 기존 수기방식의 케이블 드럼 계산에 소요되는 소비시간을 최소화하고, 종류별 케이블들을 케이블 드럼 총용량에 최적화함으로써 전기설비 생산성을 향상시킬 수 있다.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.65-70
• /
• 2010

The effect of austempering treatment on the dynamic properties of a brake drum was investigated to primarily evaluate the potential damping advantage of an AGI (austempered gray iron) drum over a PGI (pearlitic gray iron) drum. This investigation provides valuable information for brake noise reduction since the brake drum is most often the outstanding component that generates the noise of the brake assembly. Test results show that the AGI drum provided slightly larger damping values than the PGI drum for the first few major resonances observed. A finite element model of a drum was also developed to aid in studying its dynamic behavior. A good correlation was obtained between the analytical results and the actual measurement data.

• 동력기계공학회지
• /
• 제18권3호
• /
• pp.20-28
• /
• 2014

Most washing machines are now produced as a drum-type, where a washing drum mounted on a suspension system with springs and dampers, to minimize the transmittance of the vibration from the drum to the cabinet. The purpose of this paper is to develop optimized suspension system of the drum washing machine which minimizes transmission of disturbing vibration and force. In this paper, a method for optimizing suspension system of the drum washing machine is presented using ADAMS. The design variables to optimize are extracted using Sequential Quadratic Programming(SQP) in ADAMS. To evaluate optimized spring constants and damping coefficients of the drum washing machine, simulation was done to compare the vibration attenuation performances before and after the optimization. The results of simulation show that the optimized suspension system has better performance than before the optimization.

• Journal of Magnetics
• /
• 제21권4호
• /
• pp.635-643
• /
• 2016

Improvements were made in the study for the design of the conventional Eddy Current Separator (ECS) used for separating small sized non-ferrous particles in the waste. These improvements include decreasing the air gap between the material and magnetic drum, making the drum position adjustable and placing the splitter closer to the drum. Thus, small particles were separated with high efficiency. The magnetic drum was removed from inside the ECS conveyor belt system as design change and was placed as a separate unit. Hence, the force generated on the test material increased by about 5.5 times while the air gap between the non-ferrous materials and drum decreased from 3 mm to 1 mm. The non-metal material in the waste is separated before the drum in the novel design. Whereas non-ferrous metal particles are separated by falling into the splitter as a result of the force generated as soon as the particles fall on the drum. Every material that passes through the drum can be recycled as a result of moving the splitter closer to the contact point of the drum. In addition, the drum can also be used for the efficient separation of large particles since its position can be adjusted according to the size of the waste material. The performance of the novel design ECS was verified via analytical approaches, finite element analysis (FEA) and experimental studies.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.161-168
• /
• 2003

An investigation of the dimensionless torque in the newly developed cone drum twister texturing mechanism is reported. The cone drum twister is one of the outer surface contacting friction-twisting devices in false-twist texturing. In this cone drum twister, a filament yam passes over the surface of the cone drum that rotates by the passing yarn without a special driving device. This research is composed of the theoretical analysis of the false twisting mechanism and the experimental analysis at room temperature. The equations have been derived which shows interrelationship of the conical angle of cone drum, the wrapping angle, the drag angle, and the yam helix angle. Theoretical values of dimensionless torque were calculated and were compared with the experimental results. It is shown that, as the conical angle and the projected wrapping angle increased, the dimensionless torque also increased. But the conical angle was reached to ${30.75}^{\circ}C$, the dimensionless torque decreased.

• 대한토목학회논문집
• /
• 제32권6B호
• /
• pp.355-361
• /
• 2012

광동댐 유역은 융설에 의한 봄철 유출량 변화가 두드러지게 나타나는 유역으로서, 융설을 고려하지 않고 유출량을 산정할 경우 결과에 대한 신뢰성이 저하될 밖에 없다. 본 연구에서는 K-DRUM 모형에 융 적설 모듈을 포함하여 광동댐 유역을 대상으로 최근 4년간 봄철 유출량 모의를 수행하였다. 또한 융 적설 효과를 비교하기 위해 융 적설 모의기능이 적용되지 않은 경우와 적용한 경우의 결과를 비교하였다. 모의기간은 전년도 10월부터 해당연도 4월까지로 약 7개월간이고, 시단위 강우자료와 기상자료를 입력자료로 사용하였다. 유출량 모의 결과에 대한 모형의 성능을 평가하기 위하여 NSE, PBIAS, RSR 지수로 평가하였다. 신뢰성 평가 결과, 융 적설 모듈을 적용한 K-DRUM 모형은 봄철 융설에 의한 유출모의에 적용성이 우수한 것으로 나타났다.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권3호
• /
• pp.403-407
• /
• 2016

In general, drum-type boilers are designed for base load duty and applied under constant pressure operation mode. Recently, however conditions often occur that even drum-type boilers have to operate at partial load conditions. A feasibility study on adopting the sliding pressure operation for drum-type boiler was conducted, and corresponding performance changes and effects on the equipment were analyzed by utilizing a process simulation model. As a result, the conclusion was reached that drum type boilers are able to adopt the sliding pressure operation and can improve of net efficiency at part load operation in spite of the Rankine cycle efficiency reduction due to the decreases in main steam pressure. Because of thank to improvement of high pressure turbine stage-1 internal efficiency and power savings of boiler feed water pump. The sliding pressure operation is advantageous in terms of stress level relief for boiler tube as well as maintaining the rating steam temperature at part load condition. However, cautions are required because the drum boilers have poor dynamic response characteristics which may get worse during the sliding pressure operation.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 춘계 종합학술대회 논문집
• /
• pp.215-219
• /
• 2006

일반적으로 정적인 공간에서 게이머 단독으로 진행하는 게임의 만족도는 높게 나타난다. 그러나 이들 게임에는 공격적, 폭력적 양상의 비교육적인 측면도 없지 않다. 또한 장시간 게임 활동에 따른 정신적, 신체적 폐해가 게임 중독으로까지 이어져 사회문제로 대두되고 있는 것이 현실이다. 최근, 이러한 문제점의 대안으로 가족이 참여하거나 하나의 미션을 협력하여 해결하는 협동게임이 연구되고 있다. 본 논문에서는 협동적 음악기기로 개발된 재모드럼을 분석하고 4명이 참여하여 게임 콘텐츠에 따라 각자, 2인1조 또는 4인1조의 형태로 협동성 증진 게임을 진행할 수 있는 한국형 코모드럼을 제안하였다. 또한 한국의 장구를 응용한 사용자 인터페이스 설계와 활용방안을 소개한다.

• The Journal of the Acoustical Society of Korea
• /
• 제15권2E호
• /
• pp.63-75
• /
• 1996

The squeal vibration of a drum is the major source of brake noise. In this system the binary flutter model of squeal vibration was employed for the drum brake of a passenger car. The vibration analysis of a drum brake was performed by using normal modes, which are obtained by variational method. An improved method for the estimation of shoe modes is proposed and the results are compared with the exact solutions. Numerical results for the coupled system of drum and shoes good agreement with the results of experimental model analysis and those obtained by FE analysis.