• 제목/요약/키워드: K-DRS

검색결과 165건 처리시간 0.034초

A Study of the Relationship between Absorbed Energy and DR Pixel Values Using SPEC-78

  • Kim, Do-Il;Lee, Hyoung-Koo;Kim, Sung-Hyun;Ho, Dong-Su;Choe, Bo-young;Suh, Tae-Suk
    • 한국의학물리학회:학술대회논문집
    • /
    • 한국의학물리학회 2003년도 제27회 추계학술대회
    • /
    • pp.69-69
    • /
    • 2003
  • Flat panel based digital radiography (DR) systems have recently become useful and important in the field of diagnostic radiology. For DRs with amorphous silicon photosensors, CsI(TI) is normally used as the scintillator, which produces visible light corresponding to the absorbed energy. The visible light photons are converted into an electric signal in the amorphous silicon photodiode. In order to produce good quality images, we need to understand the detailed behavior of DR detectors in radiation. We, therefore, investigated the relationship between DR outputs and X -ray in terms of absorbed energy, using the SPEC-78, X-ray energy spectrum model. We calculated the total filtration of X-ray equipment measuring air exposure and this value was used in the calculation of absorbed energy. The relationship between DR output and the absorbed energy of the X-ray was obtained by matching the absorbed energy with pixel values of real images under various conditions. It was found that the relationship between these two values was almost linear. The results were verified using phantoms made of water and aluminium. The pixel value of the phantom image was estimated and compared with previous results under various conditions. The estimated pixel value coincided with the results, although the effect of scattered photons introduced some errors.

  • PDF

Electron Spin Resonance Study of Manganese Ion Species Incorporated into Novel Aluminosilicate Nanospheres with Solid Core/Mesoporous Shell Structure

  • Back, Gern-Ho;Kim, Ki-Yub;Kim, Yun-Kyung;Yu, Jong-Sung
    • 한국자기공명학회논문지
    • /
    • 제14권2호
    • /
    • pp.55-75
    • /
    • 2010
  • An ion-exchanged reaction of $MnCl_2$ with Al-incorporated solid core/mesoporous shell silica (AlSCMS) followed by calcinations generated manganese species, where average oxidation state of manganese ion is 3+, in the mesoporous materials. Dehydration results in the formation of $Mn^{2+}$ ion species, which can be characterized by electron spin resonance (ESR). The chemical environments of the manganese centers in Mn-AlSCMS were investigated by diffuse reflectance, UV-VIS and ESR spectroscopic methods. Upon drying at 323 K, part of manganese is oxidized to higher oxidation state ($Mn^{3+}$ and $Mn^{4+}$) and further increase in (average) oxidation state takes place upon calcinations at 823 K. It was found that the manganese species on the wall of the Mn-AlSCMS were transformed to tetrahedral $Mn^{3+}$ or $Mn^{4+}$ and further changed to square pyramid by additional coordination to water molecules upon hydration. The oxidized $Mn^{3+}$ or $Mn^{4+}$ species on the surfaces were reversibly reduced to $Mn^{2+}$ or $Mn^{3+}$ species or lower valances by thermal process. Mn(II) species I with a well resolved sextet was observed in calcined, hydrated Mn-AlSCMS, while Mn (II) species II with g = 5.1 and 3.2 observed in dehydrated Mn-AlSCMS. Both species I and II are considered to be non-framework Mn(II).

주행경로에 따른 국내 소형자동차 실제도로 주행 질소산화물 배출량 특성 (Characteristics of Real-road Driving NOx Emissions from Korean Light-duty Vehicles regarding Driving Routes)

  • 옥선일;엄명도;이종태;박준홍;김지철;전문수
    • 한국자동차공학회논문집
    • /
    • 제23권1호
    • /
    • pp.130-138
    • /
    • 2015
  • Despite of recently strengthened vehicle emission regulations, NOx emissions are not decreased in urban areas because of discrepancies between certification emission test modes and real driving conditions. Thus, researches on RDE-LDV (Real-driving Emission-Light-duty Vehicle) have been conducted actively using PEMS (Portable Emissions Measurement Systems). In the present study, NOx emissions were measured for 5 Korean light duty vehicles for real driving conditions including city, combined, highway, and up-downhill test route. Emission characteristics were analyzed for averaged NOx emissions per unit driving distance of each driving test routes. Furthermore, MAW (Moving Average Window) method based on $CO_2$ emissions from WLTC, which will be supported for EU regulations, was utilized. It was revealed that DRs (deviation ratios) for diesel vehicles (i.e., 5.1 ~ 8.4) were greater than gasoline vehicles (less than 0.15). Especially DR of diesel vehicle for up-downhill test route was 8.4, which indicates severe NOx emissions.

Comparison between 24-hour diet recall and 24-hour urine collection for estimating sodium and potassium intakes and their ratio among Korean adults

  • Taisun Hyun;Mi-Kyeong Choi;Young-Ran Heo;Heekyong Ro;Young-Hee Han;Yeon-Kyung Lee
    • Nutrition Research and Practice
    • /
    • 제17권2호
    • /
    • pp.284-296
    • /
    • 2023
  • BACKGROUND/OBJECTIVES: This study aimed to compare 24-h diet recall (DR) and 24-h urine collection (UC) for estimating sodium and potassium intakes and their ratio (Na/K), identifying factors associated with sodium and potassium intakes and Na/K, and identifying those who were likely to underestimate sodium and potassium intakes by DR. SUBJECTS/METHODS: A total of 640 healthy adults aged 19-69 yrs completed a questionnaire survey, salty taste assessment, anthropometric measurement, two 24-h DRs, and two 24-h UCs. RESULTS: The mean sodium and potassium intakes and Na/K were 3,755 mg/d, 2,737 mg/d, and 1.45 according to DR, and 4,145 mg/d, 2,812 mg/d, and 1.57 according to UC, with percentage differences of -9.4%, -2.7%, and -7.6% in the values between the two methods, respectively. Men, older adults, smokers, obese individuals, those who consumed all the liquid in the soup, and those who were found to be salty in the salty taste assessment consumed significantly more sodium; older adults, the heavy- activity group, and obese individuals consumed more potassium; and men, younger adults, smokers, and obese individuals had a significantly higher Na/K, according to UC. Compared with UC, DR was more likely to underestimate sodium intake in older adults, smokers, obese individuals, those who consumed all the liquid in the soup, and those who consumed eating-out/delivery food at least once a day, and potassium intake in older adults, the heavy-activity group, and obese individuals. CONCLUSIONS: The mean sodium and potassium intakes and Na/K estimated by DR were comparable to those measured by UC. However, the association of sodium and potassium intakes with sociodemographic and health-related factors showed inconsistent results when estimated by DR and UC. Factors influencing the underestimation of sodium intake by DR compared to UC should be further investigated.

수열합성법에 의한 산화아연의 제조와 광분해 특성 (Preparation of Zinc Oxide by Hydrothermal Precipitation Method and their Photocatalytic Characterization)

  • 정상구;나석은;김시영;주창식
    • Korean Chemical Engineering Research
    • /
    • 제50권5호
    • /
    • pp.808-814
    • /
    • 2012
  • 수열합성법을 이용하여 zinc acetate와 암모니아수를 $80^{\circ}C$의 고온에서 침전 반응시켜 광촉매용 산화아연 입자를 제조하였다. 암모니아수의 pH, 전구체인 zinc acetate의 농도 변화가 산화아연 입자의 특성에 미치는 영향을 조사하였다. 암모니아수 pH 11, zinc acetate의 농도 1.0M, 침전반응온도 $80^{\circ}C$의 조건에서 제조된 산화아연이 평균 입경 $3{\mu}m$로 가장 작았으며, SEM과 XRD 분석을 통하여 육방정계의 봉상 막대형, Anatase 형태의 산화아연이 제조됨을 확인할 수 있었다. DRS와 PL 분석을 통하여 제조된 산화아연이 200~400 nm의 자외선 영역에서 활성을 나타냄을 확인하였고, 자외선 조사 하에서 광분해 실험을 수행한 결과 산화아연은 3시간 동안 식용색소인 Brilliant blue FCF를 57%까지 분해할 수 있었다.

지중관로에서의 실제 허용전류 산출을 위한 도체온도 계산 알고리즘 개선에 관한 연구 (Improvement of the Conductor Temperature Calculation Algorithm for Calculating the Allowable Current in the Underground Channel)

  • 이향범;이병철;김정훈;남용현;강지원
    • 전기학회논문지
    • /
    • 제67권3호
    • /
    • pp.352-357
    • /
    • 2018
  • In this paper, the improvement of the conductor temperature calculation algorithm is studied. The allowable current of the underground transmission line is determined by the conductor temperature limit. Usually to calculate the allowable current limit, the conductor temperature is assumed in the most worst environment condition. It is possible to increase the transmission capacity if the actual burial environment is considered. Therefore, in this paper an algorithm is proposed to calculate the conductor temperature by distinguishing two area of a underground transmission line condition - the manhole where the temperature sensor can be installed and the underground transmission line in which the temperature sensor can not be installed easily. When calculating the conductor temperature by the underground line in the pipeline, the existing standard describes each environment as a single soil heat resistance and one ambient temperature. In order to compensate this situation, thermal resistance model that can take into consideration the ground surface temperature and under ground temperature is proposed. It is shown that the accuracy of the proposed model is increased compared with the existing standard calculation result.

Space-Time Quantization and Motion-Aligned Reconstruction for Block-Based Compressive Video Sensing

  • Li, Ran;Liu, Hongbing;He, Wei;Ma, Xingpo
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제10권1호
    • /
    • pp.321-340
    • /
    • 2016
  • The Compressive Video Sensing (CVS) is a useful technology for wireless systems requiring simple encoders but handling more complex decoders, and its rate-distortion performance is highly affected by the quantization of measurements and reconstruction of video frame, which motivates us to presents the Space-Time Quantization (ST-Q) and Motion-Aligned Reconstruction (MA-R) in this paper to both improve the performance of CVS system. The ST-Q removes the space-time redundancy in the measurement vector to reduce the amount of bits required to encode the video frame, and it also guarantees a low quantization error due to the fact that the high frequency of small values close to zero in the predictive residuals limits the intensity of quantizing noise. The MA-R constructs the Multi-Hypothesis (MH) matrix by selecting the temporal neighbors along the motion trajectory of current to-be-reconstructed block to improve the accuracy of prediction, and besides it reduces the computational complexity of motion estimation by the extraction of static area and 3-D Recursive Search (3DRS). Extensive experiments validate that the significant improvements is achieved by ST-Q in the rate-distortion as compared with the existing quantization methods, and the MA-R improves both the objective and the subjective quality of the reconstructed video frame. Combined with ST-Q and MA-R, the CVS system obtains a significant rate-distortion performance gain when compared with the existing CS-based video codecs.

The Syntheses, Characterizations, and Photocatalytic Activities of Silver, Platinum, and Gold Doped TiO2 Nanoparticles

  • Loganathan, Kumaresan;Bommusamy, Palanisamy;Muthaiahpillai, Palanichamy;Velayutham, Murugesan
    • Environmental Engineering Research
    • /
    • 제16권2호
    • /
    • pp.81-90
    • /
    • 2011
  • Different weight percentages of Ag, Pt, and Au doped nano $TiO_2$ were synthesized using the acetic acid hydrolyzed sol-gel method. The crystallite phase, surface morphology combined with elemental composition and light absorption properties of the doped nano $TiO_2$ were comprehensively examined using X-ray diffraction (XRD), $N_2$ sorption analysis, transmission electron microscopic (TEM), energy dispersive X-ray, and DRS UV-vis analysis. The doping of noble metals stabilized the anatase phase, without conversion to rutile phase. The formation of gold nano particles in Au doped nano $TiO_2$ was confirmed from the XRD patterns for gold. The specific surface area was found to be in the range 50 to 85 $m^2$/g. TEM images confirmed the formation a hexagonal plate like morphology of nano $TiO_2$. The photocatalytic activity of doped nano $TiO_2$ was evaluated using 4-chlorophenol as the model pollutant. Au doped (0.5 wt %) nano $TiO_2$ was found to exhibit higher photocatalytic activity than the other noble metal doped nano $TiO_2$, pure nano $TiO_2$ and commercial $TiO_2$ (Degussa P-25). This enhanced photocatalytic activity was due to the cathodic influence of gold in suppressing the electron-hole recombination during the reaction.

Identification of Glycine max Genes Expressed in Response to Soybean mosaic virus Infection

  • Jeong, Rae-Dong;Lim, Won-Seok;Kwon, Sang-Wook;Kim, Kook-Hyung
    • The Plant Pathology Journal
    • /
    • 제21권1호
    • /
    • pp.47-54
    • /
    • 2005
  • Identification of host genes involved in disease progresses and/or defense responses is one of the most critical steps leading to the elucidation of disease resistance mechanisms in plants. Soybean mosaic virus (SMV) is one of the most prevalent pathogen of soybean (Glycine max). Although the soybeans are placed one of many important crops, relatively little is known about defense mechanism. In order to obtain host genes involved in SMV disease progress and host defense especially for virus resistance, two different cloning strategies (DD RT-PCR and Subtractive hybridization) were employed to identify pathogenesis- and defenserelated genes (PRs and DRs) from susceptible (Geumjeong 1) and resistant (Geumjeong 2) cultivars against SMV strain G7H. Using these approaches, we obtained 570 genes that expressed differentially during SMV infection processes. Based upon sequence analyses, differentially expressed host genes were classified into five groups, i.e. metabolism, genetic information processing, environmental information processing, cellular processes and unclassified group. A total of 11 differentially expressed genes including protein kinase, transcription factor, other potential signaling components and resistant-like gene involved in host defense response were selected to further characterize and determine expression profiles of each selected gene. Functional characterization of these genes will likely facilitate the elucidation of defense signal transduction and biological function in SMV-infected soybean plants.

자료포락분석법을 이용한 농기계 임대사업의 효율성 분석 (Efficiency analysis of agricultural machinery rental system using the DEA model)

  • 홍순중;허윤근;정선옥;홍성현
    • 농업과학연구
    • /
    • 제39권2호
    • /
    • pp.279-289
    • /
    • 2012
  • This study was conducted to survey and diagnose operation status of the agricultural machinery rental service, analyse and compare operational efficiency among 82 city and county ATDEC (agricultural technology development and extension center) using the DEA (Data Envelopment Analysis) method, and recommend future direction, for improvement of the business. Input variables were invested budget and labor, and output variable was rental return. Percentages of return to investment on the rental service were calculated as 68.3% and 63.9% when analyzed with CCR (Charnes, Cooper and Rhodes) and BCC (Banker, Charnes and Cooper) models, respectively, indicating inefficiency of the service operation. Increase of rental charge would increase efficiency by 63.9~68.3% depending on models, and decrease of financial and labor investment would improve the efficiency by about 11.3%. Technical efficiency would be more important than scale efficiency, therefore adjustment of over-invested budget and labor needed to be made together with increase of rental charge to improve the operation. Among the ATDECs providing the rental service, 6 (7.3%), 43 (52.4%), and 33 (40.2%) were in state of CRS (constant return to scale), IRS (increasing return to scale), and DRS (decreasing return to scale), respectively. These indicated public aspects of the rental system, over-investment, lack of output component for input component, meaning that scale income would be increased by qualitative expand of rental charge. Efficiency analysis of the rental system by region showed that efficient ATDECs to be benchmarked by others were in the order of DMU-70, DMU-54, DMU-29, DMU-5, DMU-22, DMU-2, and DMU-61. More comprehensive and extensive survey and analyses would be necessary in the future.