• 제목/요약/키워드: K-Band

검색결과 10,566건 처리시간 0.035초

Design of a UWB Antenna with Band-Notch Function

  • Fanli, Zeng;Lee, Jae-Won;Kim, Chul-Hee;Choi, Jae-Hoon
    • Journal of electromagnetic engineering and science
    • /
    • 제10권1호
    • /
    • pp.39-44
    • /
    • 2010
  • In this paper, a compact wideband antenna with a band-notch function is proposed. It operates over the UWB band with a band-stop characteristic. To increase the impedance bandwidth, a ring-shaped radiator is used. By attaching a circular stub to the ring-shaped radiator, the band-notch performance is obtained. The proposed antenna operates over a frequency range from 2.7 GHz to 11 GHz to satisfy the 10-dB return-loss requirement and provides band-stop performance in the frequency band from 5.15 GHz to 6.1 GHz. Experimental results reveal that the proposed antenna exhibits good radiation performance and is suitable for UWB applications.

Ring-VCO를 이용한 멀티밴드 GPS 수신기용 PLL 설계 (A Ring VCO Based PLL for Low-Cost, Low-Power Multi-Band GPS Receiver)

  • 김윤진;소병성;고진호;박근형
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
    • /
    • pp.533-534
    • /
    • 2008
  • This paper presents a multi-phase ring VCO for low-cost, low-power GPS receiver. In the RF band used in GPS, L1 band is now in commercial-use and L2,L5 are predicting to be commercial-use soon. Thus Wide band PLL and Cost-effective IC solutions are required for future multi-band GPS receiver that received three types band at once. A new PLL architecture for multi-band GPS application is proposed. Ring VCO is even smaller than LC-VCO and a good alternative for low-cost solution. Proposed multi-phase ring VCO offers wide frequency range covering L1, L2, and L5 band, 20% reduction of area, 23% reduction of PLL power and can generate I/Q without extra I/Q generator.

  • PDF

Dual-band Frequency Selective Surface Bandpass Filters in Terahertz Band

  • Qi, Limei;Li, Chao
    • Journal of the Optical Society of Korea
    • /
    • 제19권6호
    • /
    • pp.673-678
    • /
    • 2015
  • Terahertz dual-band frequency selective surface filters made by perforating two different rectangular holes in molybdenum have been designed, fabricated and measured. Physical mechanisms of the dual-band resonant responses are clarified by three differently configured filters and the electric field distribution diagrams. The design process is straightforward and simple according to the physical concept and some formulas. Due to the weak coupling between the two neighboring rectangle holes with different sizes in the unit cell, good dual-band frequency selectivity performance can be easily achieved both in the lower and higher bands by tuning dimensions of the two rectangular holes. Three samples are fabricated, and their dual-band characteristics have been demonstrated by a THz time-domain spectroscopy system. Different from most commonly used metal-dielectric structure or metal-dielectric-metal sandwiched filters, the designed dual-band filters have advantages of easy fabrication and low cost, the encouraging results afforded by these filters could find their applications in dual-band sensors, THz communication systems and other emerging THz technologies.

Study on spectral indices for crop growth monitoring

  • Zhang, Xia;Tong, Qingxi;Chen, Zhengchao;Zheng, Lanfeng
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
    • /
    • pp.1400-1402
    • /
    • 2003
  • The objective of this paper is to determine the suitable spectral bands for monitoring growth status change during a long period. The long-term ground-level reflectance spectra as well as LAI and biomass were obtained in xiaotangshan area, Beijing, 2001. The narrow-band NDVI type spectral indices by all possible two bands were calculated their correlation coefficients R$^2$ with biomass and LAI. The best NDVIs must have higher R$^2$ with both biomass and LAI. The reasonable band centers and band widths were determined by a systematically increasing bandwidth centered over a wavelength. In addition, the first 19 bands of MODIS were simulated and investigated. Each developed spectral indices was then validated by the biomass and LAI time series using the generalized vector angle. It turned out that six new NDVI type indices within 750-1400nm were developed. NDVI(811_10,957_10) and NDVI(962_10,802_10) performed best. No satisfactory conventional NDVI formed by red and NIR bands were found effective. MODIS_NDVI(band19, band17) and MODIS_NDVI(band19, band2) were much better than MODIS_NDVI(band2,band1) for growth monitoring.

  • PDF

POTENTIAL OF MULTI-BAND SAR DATA FOR CLASSIFYING FOREST COVER TYPE

  • Shin, Jung-Il;Yoon, Jong-Suk;Kang, Sung-Jin;Lee, Kyu-Sung
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
    • /
    • pp.258-261
    • /
    • 2007
  • Although there have been lack of studies using X-band SAR data particularly for forestry application as compared to C-, and L-band SAR data, it has a potential to distinguish tree species because most signals are backscattered on the top of canopy. This study aimed to compare signal characteristics of multi-band SAR data including X-band for classifying tree species. The data used for the study are SIR-C/X-SAR data (X-, C-, L-band) obtained on Oct. 3, 1994 over the forest area near Seoul, S. Korea. Thirty ground sample plots were collected per each tree species. Initial comparison of backscattering coefficients among three SAR bands shows that X-band data showed better separation of tree species than C- and L-band SAR data irrespective of polarization. The weak penetrating in canopy layer might be possible source of information for X-band data to be useful for the classification of forest species and cover type mapping.

  • PDF

Design of Ultra-wide Band-pass Filter Based on Metamaterials Applicable to Microwave Photonics

  • Lee, Chongmin;Shim, Wooseok;Moon, Yong;Seo, Chulhun
    • Journal of the Optical Society of Korea
    • /
    • 제16권3호
    • /
    • pp.288-291
    • /
    • 2012
  • We designed an ultra-wide band-pass filter applicable to microwave reflectometry for KSTAR (Korea Superconducting Tokamak Advanced Research) and to microwave photonics. The proposed ultra-wide band-pass filter exhibits a metamaterial structure characterized by a wide band, low insertion loss, and high skirt selectivity. The proposed filter is applied to enhance the linearity of reflectometry at the output of a VCO (voltage controlled oscillator). The pass-band of the proposed filter is observed at 18~28 GHz, and the out-of-band rejection is below 20 dB. Further, we constructed an unwrapped negative phase of S(2, 1) to verify the characteristics of the metamaterial. The under- and upper-band at lower limits of the pass-band are left- and right-handed, respectively. The group delay of the filter is less than 0.5 ns.

Quad-Band Bandpass Filter Using Quad-Mode Stub-loaded Resonators

  • Liu, Haiwen;Wang, Xiaomei;Wang, Yan;Li, Shen;Zhao, Yulong;Guan, Xuehui
    • ETRI Journal
    • /
    • 제36권4호
    • /
    • pp.690-693
    • /
    • 2014
  • Compact multi-band bandpass filters using quad-mode stub-loaded resonators are proposed in this letter. Firstly, a novel approach about the mode-splitting characteristics of the quadruple-mode resonator is investigated, which can provide dual-band behavior. Secondly, a quad-band filter is proposed and designed by cascading two quadruple-mode resonators; the upper one operates at 1.8/2.4 GHz (GSM- and WiMax-band) and the lower one at 1.57/2.1 GHz (GPS- and WCDMA-band). Finally, the proposed filters have been fabricated. Respectable agreement between simulation and measurement verifies the validity of this design methodology.

Design of Dual-Band Bandpass Filters for Cognitive Radio Application of TVWS Band

  • Kwon, Kun-An;Kim, Hyun-Keun;Yun, Sang-Won
    • Journal of electromagnetic engineering and science
    • /
    • 제16권1호
    • /
    • pp.19-23
    • /
    • 2016
  • This paper presents a novel design for dual-band bandpass filters. The proposed filters are applicable to the carrier aggregation of the TV white space (TVWS) band and long-term evolution (LTE) band for cognitive radio applications. The lower passband is the TVWS band (470-698 MHz) whose fractional bandwidth is 40 %, while the higher passband is the LTE band (824-894 MHz) with 8 % fractional bandwidth. Since the two passbands are located very close to each other, a transmission zero is inserted to enhance the rejection level between the two passbands. The TVWS band filter is designed using magnetic coupling to obtain a wide bandwidth, and the LTE band filter is designed using dielectric resonators to achieve good insertion loss characteristics. In addition, in the proposed design, a transmission zero is placed with cross-coupling. The proposed dual-band bandpass filter is designed as a two-port filter (one input/one output) as well as a three-port filter (one common input/two outputs). The measured performances show good agreement with the simulated performances.

Performances of Erbium-Doped Fiber Amplifier Using 1530nm-Band Pump for Long Wavelength Multichannel Amplification

  • Choi, Bo-Hun;Chu, Moo-Jung;Park, Hyo-Hoon;Lee, Jong-Hyun
    • ETRI Journal
    • /
    • 제23권1호
    • /
    • pp.1-8
    • /
    • 2001
  • The performance of a long wavelength-band erbium-doped fiber amplifier (L-band EDFA) using 1530nm-band pumping has been studied. A 1530nm-band pump source is built using a tunable light source and two C-band EDFAs in cascaded configuration, which is able to deliver a maximum output power of 23dBm. Gain coefficient and noise figure (NF) of the L-band EDFA are measured for pump wavelengths between 1530nm and 1560nm. The gain coefficient with a 1545nm pump is more than twice as large as with a 1480nm pump. It indicates that the L-band EDFA consumes low power. The noise figure of 1530nm pump is 6.36dB at worst, which is 0.75dB higher than that of 1480nm pumped EDFA. The optimum pump wavelength range to obtain high gain and low NF in the 1530nm band appears to be between 1530nm and 1540nm. Gain spectra as a function of a pump wavelength have bandwidth of more than 10nm so that a broadband pump source can be used as 1530nm-band pump. The L-band EDFA is also tested for WDM signals. Flat Gain bandwidth is 32nm from 1571.5 to 1603.5nm within 1dB excursion at input signal of -10dBm/ch. These results demonstrate that 1530nm-band pump can be used as a new efficient pump source for L-band EDFAs.

  • PDF

재구성 특성을 갖는 다중대역 이동통신 단말기용 안테나의 설계 및 제작 (Design of a multi-band antenna for a mobile communication terminal with reconfiguration characteristic)

  • 임대수;김기래;윤중한
    • 한국정보통신학회논문지
    • /
    • 제19권4호
    • /
    • pp.772-779
    • /
    • 2015
  • 본 논문에서는 스위칭 선로를 이용한 다중대역 이동통신 단말기용 재구성 안테나를 설계 및 제작하였다. 제안된 안테나는 평면형 스트립선로와 접지면에 단락되는 스터브, 그리고 2개의 스위칭 선로를 구성함으로써 제안된 대역 LTE band 13, GSM, K-PCS, WCDMA대역을 각각 만족하도록 설계하였다. 얻어진 최적화된 수치를 사용하여 제안된 안테나를 제작하였다. 시뮬레이션 결과와 측정결과가 어느 정도 일치하고 있는 데이터를 얻었으며 -6dB 임피던스 대역폭을 기준으로 sw1과 sw2의 상태가 ON일 경우 LTE band 13대역을 또한 sw1의 상태가 off, sw2의 상태가 on일 경우 GSM, K-PCS대역을 만족한다. 마지막으로 sw1과 sw2가 off 될 경우 WCDMA대역을 만족하고 있음을 확인하였다. 그리고 제안된 대역 LTE band 13, GSM, K-PCS대역에서 이득과 방사패턴의 특성을 얻었다.