• 제목/요약/키워드: K-Ar

검색결과 3,720건 처리시간 0.024초

Ar/Ar-$H_2$ 플라즈마 및 전자선 용해에 의한 인바 및 퍼멀로이 Fe-Ni 합금의 정련 (Refining of Invar and Permalloy Fe-Ni Alloys by $Ar/Ar-H_2$ Plasma and Electron Beam Melting)

  • 박병삼;백홍구
    • 한국주조공학회지
    • /
    • 제15권2호
    • /
    • pp.175-183
    • /
    • 1995
  • It is difficult to remove such interstitial impurities as sulfur, oxygen, hydrogen and carbon in Fe-Ni alloys. Thermodynamic and kinetic studies were carried out on the behavior of hydrogen gas, oxygen gas, Si, Al and slag, and the reaction time by the $Ar/Ar-H_2$ plasma and electron beam melting. After the addition of Al, Si, they were melted by Ar plasma with reaction time changed. 80%Ni-Fe alloys showed a better deoxidation than 36%Ni-Fe alloys. At $Ar-H_2$ plasma melting, the deoxidation was significant. In the case of the electron beam melting, the residual oxygen was higher than in Ar plasma melting because electron beam melting temperature was lower than that of Ar plasma. For the decaburization, it was melted by $Ar-O_2$ plasma melting, which could remove effectively carbon by activated oxygen in plasma. We added slag to Fe-Ni alloys for the desulfurization. As the result of this experiments, the amount of residual sulfur was not changed according to the slag ratio and reaction time.

  • PDF

ZnO 박막의 fluorine-계 유도결합 플라즈마 식각 (Fluorine-based inductively coupled plasma etching of ZnO film)

  • 박종천;이병우;김병익;조현
    • 한국결정성장학회지
    • /
    • 제21권6호
    • /
    • pp.230-234
    • /
    • 2011
  • $CF_4$ Ar 및 $SF_6$/Ar 유도결합 플라즈마을 이용하여 ZnO 박막의 고이온밀도 플라즈마 식각을 수행하였다. $10CF_4$/5Ar, $10SF_6$/5Ar 유도결합 플라즈마에서 최고 ~1950 ${\AA}$/min과 ~1400 ${\AA}$/min의 식각 속도를 확보하였다. 대부분의 조건 하에서 식각된 ZnO 표면은 식각 전보다 더 낮은 표면조도 값들을 나타내었다. $10CF_4$/5Ar 유도결합 플라즈마에서 Ni mask는 ZnO에 대해 최고 11의 높은 식각 선택도를 나타낸 반면에 Al은 이보다 낮은 1.6~4.7 범위의 식각선택도를 나타내었다.

옥천변성대 서남부지역 변성퇴적암

  • 김성원;오창환;이덕수;이정후
    • 한국암석학회:학술대회논문집
    • /
    • 한국암석학회 2002년도 학술답사 옥천성변성대 서남부지역 변성퇴적암
    • /
    • pp.1-38
    • /
    • 2002
  • 옥천변성대 서남부지역은 변성이질암의 광물조합을 기준으로 남동부부터 북서방향으로 흑운모대, 석류석대, 십자석대의 3개의 변성광물분대로 나누어진다. Oh et al. (1995a)의 연구에서 보고된 남정석들은 산출되지 않는 것이 확인되었고 변성도는 흑운모대에서 석류석대를 거쳐 십자석대로 갈수록 증가한다. 쥬라기 화강암 접촉부의 국부적인 변성암류에서는 화강암에 의한 접촉변성작용에 의해 형성된 홍주석과 규선석이 산출된다. 흑운모대의 변성 압력-온도는 4.2 - 5.1 kb, 400 - 500 $^{\circ}C$이다. 십자석대의 정누대구조를 가지는 석류석과 석류석안의 사장석, 흑운모, 금흥석, 일메나이트포유광물의 공생관계로 추정한 압력-온도 (석류석 주변부: 7.0 - 8.0 kb, 550 - 620 $^{\circ}C$; 석류석 중심부: 4.0 - 5.0 kb, 420 - 520 $^{\circ}C$) 및 십자석대 내에서 후퇴변성작용 및 접촉변성작용 받은 석류석 주변부에 기록된 압력-온도 조건(약 2.0 - 3.0kb, 450 - 55$0^{\circ}C$)과 함께 옥천변성대 서남부지역의 변성암류가 시계방향의 압력-온도 경로를 겪었음을 지시한다. 연구지역 내에서 정밀 기재된 단면들에 대한 퇴적환경을 종합하면 대체 적으로 남동부에서는 천해성 환경이 인지되나 북서쪽으로 갈수록 대륙사면을 거쳐 분지 중심의 환경으로 전이되는 경향을 보인다. 이러한 퇴적상의 공간적 분포는 분지의 남동쪽보다 북서쪽의 침강이 우세하였던 것으로 해석될 수 있으며, 이는 곧 분지가 형성될 때 반지구대 (half graben) 형태로 분지가 열개 (rifting) 되었음을 의미한다. 각 변성분대에서 채취한 변성이질암으로부터 측정된 K-Ar 과 40Ar/39Ar 흑운모와 백운모 연대들은 149 - 167 Ma에 집중된다. 그리고 각 변성분대에서 동일시료에 대한 K-Ar 과 40Ar/39Ar 연대들은 동일시기를 지시함으로 연대적인 신뢰성을 확인 할 수 있었다. 옥천변성대 서남부지역의 변성암류를 관입하는 2개의 괴상의 화강암과 1개의 엽리화강암에서 얻어진 백운모와 흑운모들의 K-Ar 연대는 모두 156 Ma이며 옥천변성대 서남부지역의 변성이 질암의 연대와 유사하다. 이는 연구지역의 변성암류와 화강암류는 40Ar/39Ar 과 K-Ar 계의 흑운모와 백운모의 폐쇄온도 (약 300 - 350 $^{\circ}C$) 까지 동시에 냉각된 사실을 지시한다. 각섬석 편암내의 각섬석들은 복잡한 40Ar/39Ar 연대를 보여주며 일부가 평형연대를 보여주지만 특별한 의미 부여가 힘들다.

  • PDF

Methyltrimethoxysilane을 이용한 반사방지 코팅막의 성능 향상 (Improvement of Performance of Anti-reflective Coating Film Using Methyltrimethoxysilane)

  • 금영섭;김효섭;박주식;김영호
    • 공업화학
    • /
    • 제26권4호
    • /
    • pp.400-405
    • /
    • 2015
  • Tetraethylorthosilicate (TEOS)를 전구체로서 이용하여 제조된 기존의 반사방지(AR; anti-reflective) 코팅막은 대부분 수분을 쉽게 흡수할 뿐만 아니라 낮은 내마모성을 갖는다. 본 연구에서는 AR 코팅막의 투과율, 소수성 및 내마모성을 향상할 목적으로 전구체로서 methyltrimethoxysilane (MTMS)를 사용하고 불소 실란, 산 촉매, 염기 촉매 및 산-염기 2단계 촉매를 첨가하여 다양한 AR 코팅막을 제조하였다. 제조된 AR 코팅막은 UV-Vis, 접촉각 측정기, AFM, 연필경도 및 부착성 시험을 통해 특성을 분석하였다. 그 결과, 경화온도가 $300^{\circ}C$일 때 코팅되지 않은 유리 기판의 투과율은 90.5%인 반면, AR 코팅된 유리 기판의 투과율은 94.8%로 증가하였다. 불소 실란을 첨가한 경우, 소수성이 크게 향상되었음을 나타내듯이 AR 코팅막 표면에서의 접촉각은 $96.3^{\circ}$에서 $108^{\circ}$까지 증가하였다. AR 코팅막의 내마모성은 산 촉매에 의해 향상되었으며, 그것의 투과율은 염기 촉매에 의해 증가하였다. 산-염기 2단계 촉매 반응에 의해 제조한 AR 코팅막의 경우, 상승 효과에 의해 촉매의 도입 없이 제조된 AR 코팅막과 비교하여 투과율 및 내마모성이 향상되었다.

Cloning, Expression and Hormonal Regulation of Steroidogenic Acute Regulatory Protein Gene in Buffalo Ovary

  • Malhotra, Nupur;Singh, Dheer;Sharma, M.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제20권2호
    • /
    • pp.184-193
    • /
    • 2007
  • In mammalian ovary, steroidogenic acute regulatory (StAR) protein mediates the true rate-limiting step of transport of cholesterol from outer to inner mitochondrial membrane. Appropriate expression of StAR gene represents an indispensable component of steroidogenesis and its regulation has been found to be species specific. However, limited information is available regarding StAR gene expression during estrous cycle in buffalo ovary. In the present study, expression, localization and hormonal regulation of StAR mRNA were analyzed by semi-quantitative RT-PCR in buffalo ovary and partial cDNA was cloned. Total RNA was isolated from whole follicles of different sizes, granulosa cells from different size follicles and postovulatory structures like corpus luteum and Corpus albicans. Semi-quantitative RT-PCR analyses showed StAR mRNA expression in the postovulatory structure, corpus luteum. No StAR mRNA was detected in total RNA isolated from whole follicles of different size including the preovulatory follicle (>9 mm in diameter). However, granulosa cells isolated from preovulatory follicles showed the moderate expression of StAR mRNA. To assess the hormonal regulation of StAR mRNA, primary culture of buffalo granulosa cells were treated with FSH (100 ng/ml) alone or along with IGF-I (100 ng/ml) for 12 to 18 h. The abundance of StAR mRNA increased in cells treated with FSH alone or FSH with IGF-I. However, effect of FSH with IGF-I on mRNA expression was found highly significant (p<0.01). In conclusion, differential expression of StAR messages was observed during estrous cycle in buffalo ovary. Also, there was a synergistic action of IGF-I on FSH stimulation of StAR gene.

모바일 증강현실 환경에서 안정적인 마커 추적을 위한 필터링 기법 (A Filtering Technique for Stable Marker Tracking in Mobile Augmented Reality)

  • 윤창표;이인경;황치곤
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2017년도 춘계학술대회
    • /
    • pp.297-299
    • /
    • 2017
  • 최근 증강 현실(AR)의 응용분야가 급증하고 관련 콘텐츠 또한 수요가 증대되고 있다. 이와 같이 모바일 환경에서 AR 콘텐츠의 서비스를 위해서는 오브젝트 기반의 마커 인식 기능이 필요하다. 이때 마커에 대응하는 정보를 제공하기 위해 특정 마커에 대응하는 가상 오브젝트를 생성하여 서비스하는 기법을 사용한다. 그러나 마커에 대응하는 가상의 오브젝트를 AR 화면상에 유지할 때 카메라의 떨림, 카메라의 이동 등의 다양한 이유로 마커의 오브젝트가 불안정하게 흔들리는 현상이 발생된다. 이와 같이 모바일 디바이스 기반의 AR 서비스는 안정적으로 오브젝트를 표현하기 어렵다는 문제점을 갖는다. 본 논문에서는 모바일 AR 환경에서 고정된 마커를 인식했을 때, 디바이스의 물리적 상태 변화에 대응하는 필터링 방법을 적용하여 안정적인 마커 인식 및 추적 기법을 제안한다.

  • PDF

Effect of Ar ion Sputtering on the Surface Electronic Structure of Indium Tin Oxide

  • Lee, Hyunbok;Cho, Sang Wan
    • Applied Science and Convergence Technology
    • /
    • 제25권6호
    • /
    • pp.128-132
    • /
    • 2016
  • We investigated the effect of Ar ion sputtering on the surface electronic structure of indium tin oxide (ITO) using X-ray and ultraviolet photoelectron spectroscopy (XPS and UPS) measurements with increasing Ar ion sputtering time. XPS measurements revealed that surface contamination on ITO was rapidly removed by Ar ion sputtering for 10 s. UPS measurements showed that the work function of ITO increased by 0.2 eV after Ar ion sputtering for 10 s. This increase in work function was attributed to the removal of surface contamination, which formed a positive interface dipole relative to the ITO substrate. However, further Ar ion sputtering did not change the work function of ITO although the surface stoichiometry of ITO did change. Therefore, removing the surface contamination is critical for increasing the work function of ITO, and Ar ion sputtering for a short time (about 10 s) can efficiently remove surface contamination.

Bosch 공정에서 Si 식각속도와 식각프로파일에 대한 Ar 첨가의 영향 (Effects of Ar Addition on the Etch Rates and Etch Profiles of Si Substrates During the Bosch Process)

  • 지정민;조성운;김창구
    • Korean Chemical Engineering Research
    • /
    • 제51권6호
    • /
    • pp.755-759
    • /
    • 2013
  • Bosch 공정의 식각 단계에서 Ar을 첨가하였을 때 Si의 식각특성을 관찰하기 위하여 식각 단계에서 $SF_6$ 플라즈마만 사용한 경우와 Ar 유속비율이 20%인 $SF_6$/Ar 플라즈마를 각각 사용하여 Si을 Bosch 공정으로 식각하였다. Bosch 공정의 식각 단계에서 $SF_6$ 플라즈마에 Ar 가스를 첨가하면 $Ar^+$ 이온에 의한 이온포격이 증가하였고 이는 Si 입자의 스퍼터링을 초래할 뿐 아니라 F 라디칼과 Si의 화학반응을 가속하였다. 그 결과 식각 단계에서 20%의 Ar이 첨가되어 Bosch 공정으로 수행된 Si의 식각속도는 Ar이 첨가되지 않은 경우보다 10% 이상 빨라졌고 식각프로파일도 더욱 비등방적이었다. 이 연구의 결과는 Bosch 공정으로 Si을 식각할 때 식각속도와 식각프로파일의 비등방성을 개선하는데 필요한 기초자료로 사용될 수 있을 것으로 판단된다.

Development of simple HPLC-UV method for discrimination of Adenophorae Radix

  • Vu, Thi Phuong Duyen;Kim, Kyung Tae;Pham, Yen;Bao, Haiying;Kang, Jong Seong
    • 분석과학
    • /
    • 제30권2호
    • /
    • pp.82-88
    • /
    • 2017
  • Adenophorae Radix (AR) is a frequently used medicinal herb; because of its popularity, products containing similar herbal products are often sold as substitutes, especially if their morphology is similar. However, any analytical method to identify AR based on quantitative analysis is not registered in Korea, Japan and China Pharmacopoeias. This study developed a simple HPLC method to discriminate between authentic AR and substitutes. Linoleic acid was used as a marker compound of AR. Our optimized HPLC-UV conditions included a mobile phase of 90 % acetonitrile under isocratic condition, and a flow rate of 1.0 mL/min at room temperature. Detection wavelength was set at 205 nm. Linoleic acid was detected at 13.5 minutes for a total analysis time of 20 minutes. The standard herb of AR contained 0.025 % of linoleic acid, while four authentic AR samples and eight substitutes contained 0.040~0.071 % and 0.004~0.014 %, respectively. Comparison of the linoleic acid concentrations of the sample types to reference AR showed that among 12 samples, only the four samples were authentic. Thus, our HPLC-UV method, along with our suggested content criterion for linoleic acid concentration, can be used for the quick and accurate determination whether the herbal products are authentic AR or substitute.

Insulin-Like Growth Factor-I-Induced Androgen Receptor Activation Is Mediated by the PI3K/Akt Pathway in C2C12 Skeletal Muscle Cells

  • Lee, Won Jun
    • Molecules and Cells
    • /
    • 제28권5호
    • /
    • pp.495-499
    • /
    • 2009
  • Although insulin-like growth factor-I (IGF-I) and androgen receptor (AR) are well known effectors of skeletal muscle, the molecular mechanism by which signaling pathways integrating AR and IGF-I in skeletal muscle cells has not been previously examined. In this study, the role of PI3K/Akt on IGF-I-induced gene expression and activation of AR in skeletal muscle cells was investigated. C2C12 cells were treated with IGF-I in the absence or presence of inhibitors of PI3K/Akt pathway (LY294002 and Wortmannin). Inhibition of the PI3K/Akt pathway with LY294002 or Wortmannin led to a significant decrease in IGF-I-induced AR phosphorylation and total AR protein expression. Furthermore, IGF-I-induced AR mRNA and skeletal ${\alpha}-actin$ mRNA were blocked by LY294002 or Wortmannin. Confocal images showed that IGF-I-induced AR translocation from cytosol to nucleus was inhibited significantly in response to treatment with LY294002 or Wortmannin. The present results suggest that modulating effect of IGF-I on AR gene expression and activation in C2C12 mouse skeletal muscle cells is mediated at least in part by the PI3K/Akt pathway.