• Korean Journal of Materials Research
• /
• v.26 no.9
• /
• pp.460-467
• /
• 2016

Activated carbons (ACs) have been used as EDLC (electric double-layer capacitor) electrode materials due to their high specific area, stability, and ecological advantages. In order to prepare ACs with high density and crystallinity, coal tar pitch (CTP) was activated by $K_2CO_3$ and the textural and electrochemical properties of the obtained ACs were investigated. Although the CTP ACs formed by $K_2CO_3$ activation had much smaller specific surface area and pore volume than did the CTP ACs formed by KOH activation, their volumetric specific capacitance (F/cc) levels as electrode materials for EDLC were comparable due to their higher density and micro-crystallinity. Structural characterization and EDLC-electrode performance were studied with different activation conditions of $CTP/K_2CO_3$ ratio, activation temperature, and activation period.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.92-98
• /
• 2015

In this study, phenol-based activated carbons (ACs) were fluorinated at various fluorine partial pressures (0.01~0.03 MPa) and the $Cr^{6+}$ ion adsorption of fluorinated ACs was investigated. According to BET and XPS results, the specific surface area and total pore volume of fluorinated ACs increased by 24.7 and 55.8%, respectively, and fluorine functional groups were introduced to AC surface. The most optimized condition of $Cr^{6+}$ ion adsorption was confirmed at the fluorine partial pressure of 0.02 MPa. And also the removal efficiency of $Cr^{6+}$ ion was up to 98% at 300 mg/L of the initial concentration, and these results showed an approximately three-fold increase compared to that of using untreated ACs. Furthermore, the $Cr^{6+}$ ion adsorption of fluorinated ACs was completed in less than 30 min in contrast with untreated ACs, which was expected to be an increase of the affinity between $Cr^{6+}$ ions and ACs surfaces by fluorination.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.627-627
• /
• 2009

In this work, the activated carbons (ACs) with high porosity were synthesized from pitch by KOH chemical activation. The structure and surface properties of ACs were characterized by means of elemental analysis, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy(XPS). And, the influence of the KOH-to-pitch ratio on the porosity of the ACs was investigated using the nitrogen adsorption isotherms at 77 K and a scanning electron microscopy (SEM). As a result, pitch could be successfully converted into ACs with well-developed micro and mesopores. The specific surface areas and pore volumes were increased with an increase of the KOH-to-pitch ratio. Furthermore, it was found that the addition of KOH led to the transformation of the micropores to the meso- and macropores. In the application to electric double layer capacitors (EDLC), the pitch-based ACs showed a higher capacitance per weight and per volume, and an excellent electrochemical stability in the high voltage region.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.4
• /
• pp.303-309
• /
• 2014

This paper contains how to integrate production resources of 4M1E (Man, Machine, Material, Method and Energy), analyze and collect various type of management information which emphasize the need of a common platform's 4M1E Middleware and Autonomous Configuration. Management efficiency improved by the functionality of integrated management information and digitizing information with standardized data.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2273-2274
• /
• 2008

It respects the high speed of the Bitter expense decoder from the present paper ACS (Add Compare Select) block structures of new method it proposed. It became component anger of existing and it substituted it added all input price it predicted with the method which reduces the operation which is unnecessary it chose respectively ACS unit and a union logical operation circuit and the result after operation one in advance.

• Safety and Health at Work
• /
• v.3 no.2
• /
• pp.117-122
• /
• 2012

Objectives: To describe the time perspective of return to work and the factors that facilitate and hinder return to work in a group of survivors of acute coronary syndrome (ACS). Methods: Retrospective semi-structured telephone survey 2 to 3 years after hospitalization with 84 employed Dutch ACS-patients from one academic medical hospital. Results: Fifty-eight percent of patients returned to work within 3 months, whereas at least 88% returned to work once within 2 years. Two years after hospitalization, 12% of ACS patients had not returned to work at all, and 24% were working, but not at pre-ACS levels. For all ACS-patients, the most mentioned categories of facilitating factors to return to work were having no complaints and not having signs or symptoms of heart disease. Physical incapacity, co-morbidity, and mental incapacity were the top 3 categories of hindering factors against returning to work. Conclusion: Within 2 years, 36% of the patients had not returned to work at their pre-ACS levels. Disease factors, functional capacity, environmental factors, and personal factors were listed as affecting subjects' work ability level.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.6
• /
• pp.773-779
• /
• 2013

This study was performed to provide the basic data for the function of BTEX removal for compact electrostatic precipitator which are applicable to indoor environment (or closed spaces). For this purpose, the adsorption equilibrium test was conducted for BTEX of activated carbon sheet (ACS) and activated carbon (AC), and the adsorption characteristics of AC and ACS were evaluated using the Langmuir constant which was obtained from the adsorption characteristics, adsorption capacity and regression calculation. The surface area and adsorption pore volume of ACS reduced by 70% and 86%, respectively, as compared to those of AC, and the adsorption capacities of BTEX also showed a similar level. Thus, it is considered that ACS applied electrostatic precipitator is able to remove dust and BTEX simultaneously.

• Carbon letters
• /
• v.2 no.2
• /
• pp.105-108
• /
• 2001

In this work, the activated carbons (ACs) with high micropores were synthesized from the polystyrene (PS) with KOH as activating agent. And the influence of activation temperature on porosity of the ACs studied was investigated. The porous structures of ACs were characterized by nitrogen adsorption at 77K using BET and D-R equations, and MP and BJH methods. The weight loss behaviors of the samples impregnated with KOH were also monitored using thermogravimetric analyzer (TGA). As a result, it was found that the samples could be successfully converted into ACs with well-developed micropores. From the results of pore size analysis, it was confirmed that elevated activation temperature does lead to the formation and deepening of microstructures without significant change in mesostructures. A thermogravimetric study showed that KOH could suppress the thermal decomposition of the sample, resulting in the increase of carbon yields.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.173-174
• /
• 2003

Activated carbons (ACs) are widely used in adsorption for the removal of gaseous and aqueous pollutants[1,2]. The microbicidal property of ACs is also very important, in order to decrease the risk of water and air contamination with microorganisms. For this purpose, ACs have impregnated with silver or with metallic oxides[2]. However, in the case of Ag supported ACs prepared by impregnation, there are some problem, such as, heat-treatment, highly decrease in specific surface area and pore volume by deposited Ag, and rapidly elution of Ag at the initial stage of usage[3]. (omitted)

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.6
• /
• pp.68-74
• /
• 2010

This paper suggest a new ACS algorithm to solve SMP which was solved by Gale-Shapley algorithm. The stable marriage problem is an extensively-studied combinatorial problem with many practical applications. The classical Gale-Shapley algorithm produces a marriage that greatly favors the men at the expense of the women, or vice versa. In this paper we apply ACS algorithm to SMP to find 4 kinds of solutions such as stable matching with man-optimal, woman-optimal, egalitarian stable matching, sex-fair stable matching. So this ACS is a novel method to solve Stable Marriage Problem. Our simulation results show the effectiveness of the proposed ACS.