• Korean Journal of Veterinary Research
• /
• v.36 no.2
• /
• pp.255-264
• /
• 1996

This studies were carried out to identify the characteristics of the tongue of Korean native goat(Capra hircus) by macroscopy, microscopy and scanning microscopy. Korean native goat had torus linguae, median lingual sulcus, lingual fossa and ventral median fissure but did not have glossoepiglottic fold and terminal sulcus in the tongue. The whole length of tongue was $11.51{\pm}0.76cm$. The length of tongue apex, tongue body, tongue root and the torus linguae were $2.62{\pm}0.28$, $7.39{\pm}0.27$, $1.56{\pm}0.26$ and $6.37{\pm}0.29cm$, respectively. The width of tongue apex, torus linguae and tongue root were $3.41{\pm}0.24$, $3.74{\pm}0.29$ and $3.68{\pm}0.11$, respectively. The thickness of tongue apex was $1.60{\pm}0.10$, and the height of torus linguae was $1.52{\pm}0.15cm$. Filiform papillae were present at the tongue apex and the tongue body rostral to torus linguae. Fungiform papillae were scattered from tongue apex to rostral portion of torus linguae, being in abundance at the tongue apex. Vallate papillae were showed at the lateral portion of torus linguae, while lentiform papillae were present at its central portion. Conical papillae were located between vallate and lentiform papillae. The numbers of filiform, fungiform, conical, vallate and lentiform papillae were $46,980{\pm}1070.98$, $446.8{\pm}36.97$, $818.4{\pm}43.99$, $34.8{\pm}2.77$, and $255.6{\pm}39.30$, respectively. The average numbers of taste bud were $8.3{\pm}2.04$ in a fungiform papilla and $247.3{\pm}37.44$ in a vallate papilla. The filiform papilla had secondary and tertiary papillae. The height of filiform papilla was about $150{\mu}m$ and the diameter was $100{\mu}m$. The diameters of fungiform papillae were 350 to $550{\mu}m$. The long and short diameters of maximum-sized lentiform papilla were 4000 and $3000{\mu}m$, respectively, while those of minimum-sized papilla were 700 and $600{\mu}m$, respectively. The height of conical papillae was 450 to $600{\mu}m$ and diameter was 250 to $450{\mu}m$. The vallate papilla was round or oval in shape and its diameter was 500 to $850{\mu}m$. It had well-developed papillary groove around itself. The modified conical papillae were not observed in the tongue of Korean native goat.

• Conservation Science in Museum
• /
• v.8
• /
• pp.49-69
• /
• 2007

This is about the scientific analysis of the 10 items of the gilt-bronze Panbul excavated from Anapji, Gyeongju. First, the composition of the Panbul was confirmed, using X-ray fluorescence spectrometer (XRF), and the patinas covering the surface of the Panbul were analyzed, using X-ray diffractometer (XRD). And the micro structures and gilt layer of the Panbul were investigated, using microscope and scanning electron microscope with energy dispersive spectrometer (SEM/EDS), and in order to investigate the internal conditions of the Panbul, X-radiography was conducted. As the result, it is found out that the material of the Panbul excavated from Anapji was the bronze of copper (86~95%) and tin (4~12%), and coated with gold. And cuprite (Cu₂O) was detected from red patina of the gilt-bronze Panbul, and chalcocite(Cu₂S) also was detected from the black patina. As the result of the observation of the micro structure through microscope, it is estimated that it was manufactured, using the wax molding method, and, judging from the fact that the thickness of gilt layer was not even, and that the groove had been filled, it was presumed that the amalgam coating method had been used, but some questions still remain, because mercury was not detected. Lastly, through the X-radiography, it was observed that the tiny round spots existed, which was presumed to have been generated during the casting.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.679-684
• /
• 2017

Friction Stir Welding is a metal welding technique, in which friction heat between a welding tool and a welding material is used to weld parts at temperatures below the melting point of a material. In this study, the temperature and velocity changes in a magnesium alloy (AZ31) during the welding process were analyzed by computational flow dynamics technique while welding the material using a friction stir welding technique. For the analysis, the modeling and analysis were carried out using Fluent as a fluid analysis tool. First, the welding material was assumed to be a temperature-dependent Newtonian fluid with high viscosity, and the rotation region and the stationary region were simulated separately to consider the rotational flow generated by the rotation of the welding tool having a helical groove. The interface between the welding tool and welding material was given the friction and slip boundary conditions and the heat transfer effect to the welding tool was considered. Overall, the velocity and temperature characteristics of the welded material according to time can be understood from the results of transient analysis through the above flow analysis modeling.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.3
• /
• pp.345-351
• /
• 2010

The purpose of this study is to compare microleakage and penetration depths of sealants applied in carious and sound fissures. Extracted premolars(n=80) were divided into 4 groups according to caries status. 1; sound, 2; stained, 3; initial caries, 4; enamel caries. Sealants were applied to the occlusal groove as per manufacturers' instructions, and specimens were thermocycled, stained, sectioned, and examined for microleakage and penetration ability. The results of the present study are as follow: 1. It showed significantly higher microleakage scores in group I than group Two, Three, Four(p<0.05), but no significant difference was found between group Two, Three, and IV(p>0.05). 2. It showed significantly higher penetration scores in group Four (p<0.05), followed by group One, Two, Three, but no significant difference was found between group One, Two, and Three(p>0.05). Based on the results of present study, when the borders of the fissure sealant are on carious enamel, a significantly higher microleakage must be expected. It is considered that depth of enamel caries in the fissure should be taken into account when applying a fissure sealant.

• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.55-63
• /
• 1997

The purpose of thus study was to measure the changes of arch and dentition of maxillary posterior teeth before and after treatment and postretentios in patients treated with Quad-helix. Measurements and analysis were performed on study model with carlipers. Seventeen cases, eight boys and nine girls, were selected with average ages of 12.7 years. Mean retention period was 4 months, and mean wearing time was. 127 days. The result were as follows 1. The interpremolar widths and intermolar width were significantly increased in maxillary first piennolar and molar when compared between before and after treatment and postretention. The maxillary second premolar resulted in significant increase in interpremolar between after tretment and post retention. 2. The long axis of maxillary first premolar and first molar accompaning buccal tipping was significant increased before and after Tx and post retention. Significant increase of the lingual inclination of maxillary second premolar was obsered both in before and after Tx, and before Tx and post retention. 3. The distance between the height of tooth contour was significantly increased in the first and second premolar before and after Tx, and was significant increased in the first molar before and after Tx and post retention. 4. Intermolar width at the palatal groove was increased in before and after Tx. and post retention. The palatal depth was significant increased in before and after Tx. In conclusion expansion of maxillary dental arch showed no relapse and results were stable retention

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.7 no.1
• /
• pp.39-44
• /
• 2014

The patellar clunk syndrome is one of the patellofemoral complication, caused by formation of the fibrous nodule at the suprapatellar region after total knee arthroplasty. The symptom involves painful catching, crepitus and clunk during knee extension. It has been mainly but not exclusively associated with the posterior stabilized total knee system. The fibrous nodule is entrapped in the femoral intercondylar notch of the femoral component during flexion and as the knee is extended, it displaces back to the trochlear groove abruptly and the typical symptoms occur. The risk of developing this complication is primarily related to the design of the femoral component and higher incidence was noted with earlier designs of posterior stabilized knee prosthesis. Modifications have been made to the femoral component to optimize the kinematics of the patellofemoral joint and thereby reduced the incidence of patellar clunk syndrome but did not eliminate the problem completely. Clinical examination is the gold standard of diagnosis and imaging study has been used as a possible adjunct to diagnosis. Especially ultrasonography is an imaging modality, which can be easily performed to detect the fibrous nodule on the quadriceps tendon. We report a case of patellar clunk syndrome which was diagnosed with ultrasonography.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1339-1347
• /
• 2015

This study discusses a remote control torch system equipped with a GMAW double wire reel. The welding machine is 30m away from the wire feeder at the industrial site and the feeder is three to five meters away from the torch. Accordingly, the welders cannot control the current and voltage that meets the welding condition during work when they are working at a place that prevents them from seeing the control panel, such as inside a vehicle or tank or at a far work site. They also have no choice but to stop working to change the wire reel when it is burned out completely. Such work suspension resulting from frequent moves to adjust the current and voltage as well as to replace the wire and subsequent cooling causes welding defects. This study produced a remote control torch equipped with a double wire reel by simplifying and streamlining the existing GMAW functions to reduce the troubling issue. The remote control torch equipped with a double wire reel and the existing $CO_2$ /MAG welding torch were applied as a V-groove butt in the vertical position using 6mm rolled steel for a SM50A welding structure. After welding, the condition of welded surface beads underwent a visual inspection and radiographic inspection to analyze the welding quality inside the welded part. This study also evaluated the reduction of welding defects, cost saving, the replacing performance against the existing commercial welders, and the effects on possible compatibility.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.755-759
• /
• 2016

The use of heat pipes in the electronic telecommunication field is increasing. Among the various types of heat pipes, the thin flat heat pipe has relatively high applicability compared with the circular heat pipe in the electronic packaging application. The thin flat heat pipe based on extrusion fabrication has a simple capillary wick structure consisting of rectangular cross sectional grooves on the inner wall of the pipe. Although the groove serves as a simple capillary wick, and many such grooves are provided on the inner wall, it is difficult for the grooves to realize a sufficiently high capillary force. In the present study, a thin flat heat pipe with a wire bundle was developed to overcome the drawback of poor capillary force in the thin flat heat pipe with grooves, and was evaluated by conducting tests. In the performance test, the thin flat heat pipe with the wire bundle showed a lower thermal resistance of approximately 3.4 times, and a higher heat transfer rate of approximately 3.8 times with respect to the thin flat heat pipe with grooves as the capillary wick respectively. The possibility of using the wire bundle as a capillary wick in the heat pipe was validated in the present study; further study for commercializing this concept will be taken up in the future.

• Progress in Medical Physics
• /
• v.23 no.3
• /
• pp.127-137
• /
• 2012

A conversing beam is firstly designed for radiosurgery by a neurosugern Lars Leksell in 1949 with orthogonal x-rays tube moving through horizontal moving arc to focusing the beam at target center. After 2 decades he composits 201 source of the Co-60 for gamma knife which beams focused at locus. Sveral linac-based stereotactic radiosurgery using the circular collimated beam which size range for 0.4~4.0 cm in a diameter by non-coplanar multiarc have been developed over the decades. The irregular lesions can be treated by superimposing with several spherical shots of radiation over the tumour volume. Linac based techniques include the use of between 4 and 11 non-co-planar arcs and a dynamic rotation technique and use photon beam energies in the range of 6~10 MV. Reviews of the characteristics of several treatment techniques can be found in the literature (Podgorsak 1989, Schell 1991). More in recent, static conformal beams defined by custom shaped collimators or a mini- or micro-multileaf collimator (mMLC) have been used in SRS. Finally, in the last few years, intensity-modulated mMLC SRS has also been introduced. Today, many commercial and in-house SRS programs have also introduced non-invasive immobilization systems include the cyberknife and tomotherapy and proton beam. This document will be compared the characteristics of dose distribution of radiosurgery as introduced gamma knife, BrainLab include photon knife in-house SRS program and cyberknife in currently wide used for a cranial SRS.

• Clinics in Shoulder and Elbow
• /
• v.13 no.1
• /
• pp.7-13
• /
• 2010

Purpose: Our purpose was to retrospectively analyze clinical results of subpectoral tenodesis of the proximal biceps tendon using an interference screw. Materials and Methods: We reviewed 23 cases of patients receiving tenodesis of the proximal biceps tendon between January 2008 and January 2009 for whom we had follow-up data for at least 1 year. Twenty-three cases were operated on using subpectoral tenodesis; 16 of these cases had a rotator cuff tear. The results were judged using a visual analog scale (VAS), ASES, tenderness on the biceps groove, fixation failure and the degree of deformity (BAD). Results: VAS and ASES scores were significantly improved in all patients by the time of the final observation. There were no significant complications or fixation failures. The patients without a tear of the rotator cuff had a better result than patients with a tear of the rotator cuff, but the difference between the two groups was not significant (p>0.05). Conclusion: In patients with pathology of the long head of the biceps brachii, benefits of subpectoral interference screw tenodesis include pain relief, maintenance of functional biceps, muscle strength, and cosmesis. Subpectoral biceps tenodesis using interference screw fixation appears to be a promising, reproducible, reliable technique for addressing anterior shoulder pain related to pathology of the long head of the biceps brachii.