• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.2
• /
• pp.161-168
• /
• 2012

In this paper, we have experimentally studied on phase characteristics of airborne radome for ELINT directional finding system, because it is difficult to find theoretical solutions for phase error of the radome. Especially, we described the millimeter wave band radome that was fabricated with cyanate-ester material and its thickness was 2mm. We presented the phase error about millimeter band radome. That phase error is about 30 degrees for parallel and perpendicular polarization in the K-Ka band. That is reasonable value for the ELINT directional finding system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.83-88
• /
• 2017

In this paper, a 3-port waveguide circulator of Ka-band millimeter-wave for isolation between transmit channel and receive channel at high power transmit mode is designed and fabricated for the seeker of the guided missile and circulator performance is verified through the S-parameter, high power and operation temperature test. At the configuration design, interface design between a seeker antenna and the circulator is considered and half-height of standard waveguide is applied for minimum and light weight body. The shape of permanent magnet and ferrite is optimized by simulation and tuning dielectrics at each port are placed for the best performance. In Fc(center frequency)${\pm}1000MHz$, designed waveguide circulator has below -20 dB return loss, below 0.5 dB insertion loss and below -23 dB isolation. It is found that circulator characteristics is similar to design results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.91-96
• /
• 2018

In this paper, dual axes waveguide rotary joint, which operates at high power and has low loss characteristic, is designed and fabricated for a Ka-band millimeter-wave small radar. Its electrical performance is verified through the S-parameter at room temperature, high power and operation temperature test. Rotary joint functionally consists of the mode converter transforming rectangular waveguide into circular waveguide and the choke at the rotation part. At the configuration design, linking a fixed transmitter to an antenna rotating dual axes electrically for minimum loss and light weight body are considered. In Fc(center frequency)${\pm}500MHz$, the designed rotary joint has VSWR 1.5:1 below return loss, -2.0 dB above insertion loss. It is found that rotary joint characteristics is similar to design results.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.1
• /
• pp.63-70
• /
• 2011

The needs for satellite formation flying are gradually increasing to perform the advanced space missions in remote sensing and observation of the space or Earth. Formation flying in low Earth orbit can perform the scientific missions that cannot be realized with a single spacecraft. One of the various techniques of satellite formation flying is the determination of the precise baselines between the satellites within the formation, which has to be in company with the precision validation. In this paper, the baseline of Gravity Recovery and Climate Experiment (GRACE) A and B was determined with the real global positioning system (GPS) measurements of GRACE satellites. And baseline precision was validated with the batch and sequential processing methods using K/Ka-band ranging system (KBR) biased range measurements. Because the proposed sequential method validate the baseline precision, removing the KBR bias with the epoch difference instead of its estimation, the validating data (KBR biased range) are independent of the data validated (GPS-baseline) and this method can be applied to the real-time precision validation. The result of sequential precision validation was 1.5~3.0 mm which is similar to the batch precision validation.

• Journal of electromagnetic engineering and science
• /
• v.16 no.2
• /
• pp.80-86
• /
• 2016

This paper proposes the algorithm for forward link adaptive coding and modulation (ACM) and the detailed design for a satellite communication system to improve network reliability and system throughput. In the ACM scheme, the coding and modulation schemes are changed by as much as the channel can provide depending on the quality of the communication link. To implement the forward link ACM system in the Ka-band, channel prediction and modulation/coding decision methods are proposed and simulated. The parameters of the adaptive filter predictor based on the least mean square are optimized, the minimum mean square error of the channel predictor is 0.0608 when step size and the number of filter tap are 0.0001 and 4, respectively. A test-bed is set up to verify the forward link ACM system, and a test is performed using a Ka-band satellite (i.e., Communication, Ocean, and Meteorological Satellite [COMS]). This test verifies that the ACM scheme can increase the system throughput.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.35-43
• /
• 2022

In this paper, a study was conducted to produce 20W by combining a 10W MMIC and raising the unit power amplifier to 100W SSPA by combining the 8-way spatial coupler. SSPA requires low-loss, high-efficiency coupling techniques to meet high output with the output of a single element relatively low compared to TWTA. Designed and produced in this paper, the SSPA was manufactured as a 100W SSPA by mounting eight 20W high-power amplification modules in an 8-way spatial coupler with a reflection loss of 20dB or more and an excellent coupling efficiency of 94% or more. When -10dBm was applied, it was 112.2~169.8W at 20kHz 20%, 125.9~173.8W at 400kHz 40%, 117.5~162.2W at 800kHz 40%, showing performance of over 60dB and over 100W in all three PRF conditions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.569-571
• /
• 2007

In this paper, hem antenna composed of rectangular hern, circular polarizer and straight-type mode convertor is designed and fabricated. The circular polarizer is designed as a dielectric type having broadband characteristic, and it is inserted into the rectangular hem with $45^{\circ}$ inclination. The straight-type mode convertor has a terrace-type structure in order to convert the TEM mode signal of coaxial cable to the TE mode of rectangular waveguide, and this structure minimizes conversion loss. Fabricated hem antenna operates at $30.085\sim30.885GHz$ and has VSWR < 1.5, Axial ratio < 1.0dB and antenna gain of $6.7\sim7.0dBi$ in the band.

• Journal of electromagnetic engineering and science
• /
• v.10 no.1
• /
• pp.18-24
• /
• 2010

A Ka-band microstrip array antenna for wide-range detection of moving targets is analyzed through a photonicassisted reactive-near-field characterization technique. The antenna array employs a 3-dB-tapered feed network to suppress the sidelobe level while retaining a wide azimuth beamwidth for a wide detection range. The relative nearelectric field patterns of the array and its 3-dB-tapered feed lines have been measured using an electro-optic fieldmapping technique for minimally invasive millimeter-wave sensing. A number of typical limitations on the technique, involving bandwidth, low signal-modulation depth, and high laser-induced noise in high-frequency applications, have been overcome by suppressing the carrier portion of the optical interrogation beam.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.8
• /
• pp.36-44
• /
• 1999

This paper presents the design and fabrication of the duplexer for a Ka-band satellite transponder which is analyzed transmission characteristics by calculating the generalized scattering matrix using mode matching method. It is composed of 2 bandpass filters, coupled with H-plane T-junction having symmetrical inductive iris and E-plane metal insert structures. Compared with the size and weight of the Rx and Tx filter loaded with a transponders respectively, those of the duplexer can be effectively reduced. In a high power transmission, the variation of the filter characteristics is minimized by the scheme that irises are extended to the exterior of H-plane of the waveguide. This scheme needs no extra heat sinks for dissipating high power. The duplexer is designed to improve the simplification, durability and reliability by eliminating tuning screws, which have been used to compensate for the characteristics of fabricated filters. The bandpass filters of the duplexer show the insertion loss of less than 1.2 dB and the return loss in excess of 15 dB. The isolations of more than 65 dB have been achieved between Rx and Tx filter.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.331-332
• /
• 2008

A horn antenna having dual-band and dualpolarization operation is proposed. To implement a small-sized structure providing circular polarizations in the Ka- and K-band, the antenna is designed by using the horn radiator on the basis of a conical helix which is exited by two ports for TX and RX in both ends. Through a design optimization process, a compactdual-band and dual-polarized horn antenna having high gain and high isolation performance was realized.