• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.816-821
• /
• 2015

In this paper, an in-flight prediction method of thrust profiles for solid rocket motors is proposed. Actually, it is very difficult to have detailed information about the performance of the rocket motors beforehand because it is quite sensitive to combustion environments. To overcome this problem, we have developed an algorithm for generating in-flight prediction of rocket motor performance in realistic environments via a reference burnback profile and accelerations measured at a short time-interval just after launch. The performance is evaluated through a lot of flight test results.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.193-196
• /
• 2002

The relativistic theory has not been properly taken up by the marine hydrodynamicists. To take on a relativistic view, we confine ourselves to a simple vector case of a wave train in spacetime, to be shown to represent a sound wave or a surface wave, and bring in an observer who is travelling on another platform. We are interested in relative position of each event on these two worldlines. It, then, will be shown that the velocity, the acceleration, the encounter frequency, the group velocity, and the time and the space distance between the wave and the observer on the worldlines should all be derivable in principle. This is interpreted to mean that we really have the relativistic events taking place with different values of time dilation in the sense of 'spacetime', and that the well-known ${\lceil}special Theory of Relativity{\rfloor}$ applies just as well in hydrodynamic waves.

• Journal of the korean society of oceanography
• /
• v.33 no.4
• /
• pp.212-218
• /
• 1998

Three different outflow boundary conditions are considered in modeling the East Sea circulation. The first one is that of the conventional constant volume transport (CT). The second one is the Orlanski radiation boundary condition (OR). The third one is that of the constant sea level just outside the outflow boundary (SL). In the third condition, the outflow current is set to be driven by the sea level differences across the outflow open-boundary lines, based on the recent knowledge that the Tsushima Current is driven by the sea level differences across the inflow and outflow boundaries. In case of OR it takes too much time to reach the steady state, resulting in a large increase of Tsushima Current Water in the basin and low level of kinetic energy. Both CT and SL reach the steady state in a relatively short time. However, SL is more recommendable, because it is based on physical background and generates less numerical noises than CT.

• International Journal of High-Rise Buildings
• /
• v.9 no.1
• /
• pp.61-70
• /
• 2020

After the 1884 Home Insurance building in Chicago and 1889 Tower building in New York, 15 Park Row became the tallest building in the USA in 1899 and it held this record for nine years. Completed just before the arrival of the 20^th century, this building deserves to be recognized for the sophistication of its architecture with respect to contextual understanding of the 19^th century historic texture in Lower Manhattan, its uniquely economical floor plans, and its use of natural ventilation and daylight. The compositional techniques using the proportional analysis of its context reflect the highest level of architectural education of its time by its architect Robert H. Robinson. In addition, it also offers a unique glimpse to the state-of-the-art technology of its time regarding its structure, its use of movement systems that was capable of serving 4000 users.

• IE interfaces
• /
• v.12 no.3
• /
• pp.468-479
• /
• 1999

Lean production system can be defined as customer(product)-oriented production system with small lot size and flow-shop layout based on the JIT(Just-in-time) principles. In this paper, we introduce a case example of implementation of the Lean product ion system for manufacturing line of electronic component which has both machine processes and manual jobs. We also investigate the issues of implementing the Lean production system with the viewpoints of layout design scheme and JIT management rules. In the layout design, we propose the cell-line which has flow-shop layout with small lot size. In the management rules, the superior cell rule is applied in order to boost the needs of kaisen up. As the results of implementing the Lean production system, production lead time is decreased from 5 days to 1.5 days and also productivity and quality level arc surprisingly increased.

• Journal of Korea Multimedia Society
• /
• v.7 no.12
• /
• pp.1708-1718
• /
• 2004

In this paper, we are concerned with a digital fingerprinting scheme for multi-purchase where a buyer wants to buy more than a digital content. If we apply previous schemes to multi-purchase protocol, the number of execution of registration step and decryption key should be increased in proportion to that of digital contents to be purchased in order to keep unlinkability. More worse, most of fingerprinting schemes in the literature are based on either secure multi-party computation or general zero-knowledge proofs with very high computational complexity. These high complexities complicate materialization of fingerprinting protocol more and more. In this paper, we propose a multi-purchase fingerprinting scheme with lower computational complexity. In the proposed scheme, a buyer executes just one-time registration step regardless of the number of contents to be purchased. The number of decryption key is constant and independent of the number of contents to be purchased. We can also reduce the computational costs of buyers by introducing a concept of proxy-based fingerprinting protocol.

• The Journal of Korea Robotics Society
• /
• v.10 no.2
• /
• pp.90-95
• /
• 2015

The main goal of e-learning systems is just-in-time knowledge acquisition. Rule-based e-learning systems, however, suffer from the mesa effect and the cold start problem, which both result in low user acceptance. E-learning systems suffer a further drawback in rendering the implementation of a natural interface in humanoids difficult. To address these concerns, even exceptional questions of the learner must be answerable. This paper aims to propose a method that can understand the learner's verbal cues and then intelligently explore additional domains of knowledge based on crowd data sources such as Wikipedia and social media, ultimately allowing for better answers in real-time. A prototype system was implemented using the NAO platform.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.917-921
• /
• 2002

In this paper, we made different types of non-thermal plasma reactors such as Metal-particle reactor with $Al_2O_3$ to measure NOx removal characteristic and the dielectric effect for NOx removal. NOx removal rate is not so good when we use just dielectric of $Al_2O_3$ at the Metal-particle reactor, also we just put sludge pellets(100%) without Metal-particle reactor with $Al_2O_3$ and dielectric such as $TiO_2$, $BaTiO_3$ to measure the effect of sludge for NOx removal so that NOx removal rate is almost the same. However NOx removal rate is more than 90% in case of the reactor of composition shape used both dielectric of $Al_2O_3$ and sludge pellets at the same time. In case of the shape of plasma reactor with dielectric, the Metal-particle reactor with $Al_2O_3$, and the metal-particle reactor with both $Al_2O_3$ and dielectric such as $TiO_2$, $BaTiO_3$ at the same time, they are almost the same effect for NOx removal, so we made MNPR(Metal-particle Non-thermal Plasma Reactor with $Al_2O_3$) to reduce these kinds of demerits. Finally, we think MNPR should be much better than other reactors for NOx removal.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.161-166
• /
• 2006

Recently various applications have been proposed to improve supply chain process and management by not only using various management theories such as JIT(just In Time) and SCM(Supply Chain Management) but also utilizing emerging technology like RFID(Radio Frequency Identification). But existing research was merely focused on the use of the theories and technology on a particular work or material. Therefore, the objective of this study is to derive basic types of construction supply chain management which spans from manufacturing to installation at the construction site. This research proposes the seven types of construction supply chain processes, which has been derived based on the progress management theory and budget items for construction project. It is expected that the result of this study can be applied for RFID-based construction supply chain management as well as more efficiencies in various management areas.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.150-153
• /
• 2006

GS E&C had developed the construction management system, PMS which is based on EVMS in 1997. Recently, TPMS has developed for effective construction management through applying daily schedule management and JIT on material, labor, equipment focusing field work. TPMS realizes "Shielding" and "Make-Ready Process" which are the main concept of Lean construction. Through this system, it can manage and plan daily field work, support the field work related material, labor, and equipment planning, and minimizes the non-valuable process. This paper introduces the concept of TPMS, and through established system, it can lead the construction culture and raise the competitive power of construction industry