• Journal of Welding and Joining
• /
• 제5권3호
• /
• pp.19-27
• /
• 1987

This paper presents the weldability for cold pressure but welding method in junction of dissimilar metals each other. Although the weldability between the same aluminium metal plate welding has been studied, the study of itthe rod of aluminium and coper has not fully been investigated. The purpose is to suggest the optimal conditions on the rod of those under above method. To obtain the optimal conditions, associated experiments were performed in a various welding parameters. Consequently, it was proved that the mechanical properties such as tensile strength, hardness and bending strength could be obtained excellent particularly under the welding conditions; pressure is $(32~39) {\times} 10^3/kg/cm^2$, time is beyond 70 seconds, stage is higher than fifth stage.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.584-587
• /
• 2006

An energy generating greenhouse based on fluoropolymer envelope and fresnel lens is proposed. The outstanding properties of the fluoropolymer films make them very suitable for large scale solar applications. Extremely high optical transmission over the whole solar spectrum, combined with mechanical strength, and durability allows us to design a highly optimized greenhouses for both plant growing and energy generation. Systems such as photovoltaic triple junction cells are especially attractive since they have up to 35% efficiency with much less cell material when the sun beam is focused with concentrators such as fresnel lenses. Cooling such devices will enhance the efficiency and provide useful thermal energy that could be further utilized for various applications depending on the local demands. This article introduces the basic ideas and principles of the energy generating greenhouses as a first step towards the actual deployment of such systems under Korean environment.

• 신재생에너지
• /
• 제5권4호
• /
• pp.34-37
• /
• 2009

Using six SMD(surface mount device) type AlGaAs/GaAs single junction solar cells connected in series, a power source was fabricated for a white GaN LED. The electrical properties of the power source was measured and analyzed under one sun (100mW/$cm^2$) and various indoor light (300 - 900 lux) conditions. Under 600 lux indoor light condition, output power was 17.06 ${\mu}W$ and it was 30.75 ${\mu}W$ under 900 lux indoor light condition. Using the fabricated solar cell power supply, we have turned on the white GaN LED. It was worked well under 15 ${\mu}W$(at 480 lux) power supplied from solar cell array. This kind of solar cell power supply can be used as a power source for ubiquitous sensor network (USN).

• Bulletin of the Korean Chemical Society
• /
• 제17권3호
• /
• pp.245-253
• /
• 1996

A topological theory has been introduced to explain and evaluate the fractional volumes of system materials, the change of the weight and concentration of monomer molecules, molecular weight distribution, and interaction functions of polymer-polymer and polymer-oligomer, etc. for dispersion polymerization. The previous theory of Lu et al. has offered only an incomplete simulation model for dispersion polymer systems, whereas our present one gives a general theoretical model applicable to all the polymerization systems. The theory of Lu et al. considered only the physical property term caused by interaction between matters of low molecular weight (i.e., diluent, monomer, and oligomer) and polymer particles without dealing with physical properties caused by the structure of polymer networks in polymer particles, while our theory deals with all physical effect possible, caused by the displacement of not only entangled points but also junction points in polymer particles. The theoretically predictive values show good agreement with the experimental data for dispersion polymerization systems.

• 반도체디스플레이기술학회지
• /
• 제20권2호
• /
• pp.34-42
• /
• 2021

Recent cleaning technologies of mask in extremely ultraviolet semiconductor processes were reviewed, focused on newly developed issues such as particle size determination or hydrocarbon and tin contaminations. In detail, critical particle size was defined and proposed for mask cleaning where nanosized particles and its various shapes would result in surface atomic ratio increase vigorously. A new cleaning model also was proposed with amphoteric behavior of electrolytically ionized water which had already shown excellent particle removing efficiency. Having its non-equilibrium and amphoteric properties, electrolyzed ion water seemed to oxidize contaminant surface selectively in nano-scale and then to lift up oxidized ones from mask surface very effectively. This assumption should be further investigated in future in junction with hydrogen bonding and cluster of water molecules.

• 한국진공학회지
• /
• 제4권S2호
• /
• pp.90-94
• /
• 1995

Defects introduced by Si, Ge preamorphization and their effects on the dopant diffusion and electrical characteristics. Good crystalline quality are obtained after the annealing of Ge ion double implanted samples. The defect clusters under the a/c interface are expected to extend up to the deep in the Si ion implanted samples. The dislocation loops near the junction absorb the interstitial Si atoms resolving from the defect cluster and result in the prevention of enhanced boron diffusion near the tail region of boron profile and show good reverse current charactristics.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.687-694
• /
• 2015

A photoluminescence (PL) imaging method using a vision camera was employed to inspect InGaN/GaN quantum-well light-emitting diode (LED) epi-wafers. The PL image revealed dark spot defective regions (DSDRs) as well as a spatial map of integrated PL intensity of the epi-wafer. The Shockley-Read-Hall (SRH) nonradiative recombination coefficient increased with the size of the DSDRs. The high nonradiative recombination rates of the DSDRs resulted in degradation of the optical properties of the LED chips fabricated at the defective regions. Abnormal current-voltage characteristics with large forward leakages were also observed for LED chips with DSDRs, which could be due to parallel resistances bypassing the junction and/or tunneling through defects in the active region. It was found that the SRH nonradiative recombination process was dominant in the voltage range where the forward leakage by tunneling was observed. The results indicated that the DSDRs observed by PL imaging of LED epi-wafers were high density SRH nonradiative recombination centers which could affect the optical and electrical properties of the LED chips, and PL imaging can be an inspection method for evaluation of the epi-wafers and estimation of properties of the LED chips before fabrication.

• 센서학회지
• /
• 제7권1호
• /
• pp.67-72
• /
• 1998

Plused ArF excimer laser ablation과 열증착법에 의해 p형 Si 기판위에 PbTe/CuPc 박막을 증착하였다. 성장된 박막의 구조적, 전기적 특성은 XRD, 전류-전압 곡선등의 분석으로 행하였다. XRD 분석으로부터 PbTe박막과 CuPc 박막은 a 축의 배향성을 지닌 박막으로 성장하였음을 알 수 있었다. PbTe/CuPc/Si 박막의 광전특공을 조사하기 위하여 빛을 조사했을 때와 빛을 조사하지 않았을 때의 수직방향의 전류-전압 (I-V) 특성을 CuPc/Si, PbTe/Si 단층막의 특성과 비교 관찰하였다. PbTe/CuPc/Si 박막에서 단축 광전류 ($J_{sc}$)가 $25.46\;mA/cm^{2}$, 개회로 광전압 ($V_{oc}$)이 170 mV인 커다란 광기전력 특성을 나타내었다. 또한 양자효율 (QE)은 15 %, 광전변환효율 (${\eta}$)은 $3.46{\times}10^{-2}$로 측정되었다. QE와 ${\eta}$를 기초로 한 PbTe/CuPc/Si 접합과 광전류 과정은 CuPc 층에서의 광캐리어 생성, PbTe/CuPc 계면에 의 광캐리어 분리 그리고 PbTe층에서의 광캐리어 운송 역할이 효율적으로 수행된 결과임을 알 수 있었다.

• 한국자기학회지
• /
• 제17권4호
• /
• pp.162-165
• /
• 2007

본 연구에서는 CoFeB/MgO/CoFeB 구조를 가지는 자기터널접합에서 capping층 재료의 종류와 열처리 시간에 따른 비정질 top CoFeB 자성층의 결정화 상태 및 자기터널접합의 자기적 특성 변화에 대한 연구결과를 비교 분석 하였다. Hcp(Hexagonal close-packed)의 결정구조를 가지는 Ru(002)를 capping층 재료로 사용한 자기터널접합 박막의 경우에는 열처리 이후 Ru과 인접한 부분의 top CoFeB이 bcc-CoFe(110)로 성장하는 반면, TiAl과 ZrAl을 capping층 재료로 사용한 자기터널접합의 경우는 열처리 이후 top CoFeB이 MgO와 epitaxial하게 bcc-CoFe(002)로 결정성장 하였다. 이로 인해 Ru을 사용한 자기터널접합의 터널자기 저항비(46.7%)보다 약 1.5배 높은 터널자기저항비(TiAl: 71.8%, ZrAl: 72.7%)를 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.294.1-294.1
• /
• 2016

Transition metal dichalcogenides (TMDs) with two-dimensional layered structure, such as molybdenum disulfide (MoS2) and tungsten diselenide (WSe2), are considered attractive materials for future semiconductor devices due to its relatively superior electrical, optical, and mechanical properties. Their excellent scalability down to a monolayer based on the van der Waals layered structure without surface dangling bonds makes semiconductor devices based on TMD free from short channel effect. In comparison to the widely studied transistor based on MoS2, researchs focusing on WSe2 transistor are still limited. WSe2 is more resistant to oxidation in humid ambient condition and relatively air-stable than sulphides such as MoS2. These properties of WSe2 provide potential to fabricate high-performance filed-effect transistor if outstanding electronic characteristics can be achieved by suitable metal contacts and doping phenomenon. Here, we demonstrate the effect of two different metal contacts (titanium and platinum) in field-effect transistor based on WSe2, which regulate electronic characteristics of device by controlling the effective barreier height of the metal-semiconductor junction. Electronic properties of WSe2 transistor were systematically investigated through monitoring of threshold voltage shift, carrier concentration difference, on-current ratio, and field-effect mobility ratio with two different metal contacts. Additionally, performance of transistor based on WSe2 is further enhanced through reliable and controllable n-type doping method of WSe2 by triphenylphosphine (PPh3), which activates the doping phenomenon by thermal annealing process and adjust the doping level by controlling the doping concentration of PPh3. The doping level is controlled in the non-degenerate regime, where performance parameters of PPh3 doped WSe2 transistor can be optimized.