• 한국도로학회논문집
• /
• 제14권1호
• /
• pp.25-34
• /
• 2012

급속한 경제성장은 대규모 도로건설 및 물류에 필요한 차량의 대형화 및 고속화를 유도하였으나, 이로 인해 발생하는 대기오염 및 자동차의 소음, 진동은 사회적 문제로 대두되고 있는 실정이다. 기층용 콘크리트 블록은 Helmholtz Resonators 이론을 접목시킴으로써 차량의 타이어 파열음과 차량음 등을 흡수하여 소음을 현저히 줄이는 기능을 보유하고 있어 접속도로, 아파트 단지내 도로, 주택가 도로 등 소음발생이 높은 지역에 적용한다면 소음저감에 대한 사회적 요구를 충족시킬 수 있다. 본 연구에서는 2-layer 아스팔트포장과 기층용 콘크리트 블록의 복합식 공법으로 일반 콘크리트 블록과 기층용 콘크리트 블록의 흡음효과 시험을 실내 시험으로 실시하였다. 시험 조건으로는 홀 사이즈, 간격, 깊이가 결정된 시편에 각 차종별 초기소음을 다르게 주어 소음저감효과를 분석 하였다. 2-layer아스팔트 표층과 콘크리트블록을 이용하여 차량소음크기, 시편크기, 측정거리, 홀의 형상 및 크기에 따른 데이터를 분석한 결과 소음저감효과는 탁월했으며 약 4dB에서 최대 9dB 정도 감소시킨 것으로 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.313-320
• /
• 2000

The purpose of this study was to evaluate on the interfacial morphology between dentin and restorative materials. In this in vitro study, the cavity wall restorated with 3 different kinds of tooth colored restorative materials [resin-modified Glass Ionomer cement (Fuji II LC), composite resin (Z-100), compomer (Dyract)]. The thirty extracted human molar teeth without caries and/or restorations are used. The experimental teeth were randomly divided into three groups of ten teeth each. In each group, Wedge shaped cavities (width: 3mm, length: 2mm, depth: 1.5mm) were prepared at the cementoenamel junction on buccal and lingual surfaces. The adhesive of composite resin were mixed with rhodamine B. Primer of composite resin, Prime & Bond 2.1 of Dyract and liquid of Fuji II LC were mixed with fluorescein. In group 1, the cavity wall was treatment with dentin conditioner, and then restorated with Fuji II LC. In group 2, the cavity wall was treatment with Prime & Bond 2.1 and then restorated with Dyract. In group 3, the cavity wall was etching with 10% maleic acid, applied with primer and bonding agent and then restorated with Z-100. The interface between dentin and restorative materials was observed by fluoresence imaging with a confocal laser scanning microscope. The results were as follows : 1. In Glass ionomer group, adaptation of resin modified Glass-ionomer restoration against cavity wall is tight, but the crack formed inside of restoration were observed. 2. In Dyract group, the penetration of resin tag is shorter and the width of hybrid layer is narrower than composite resin group. 3. In Z-100 group, primer penetrated deeply through dentinal tubule. Also bonding agent was penetrated along the primer, but the penetration length is shorter than primer part, and in 3-D image, the resin tag is conical shape and lateral branch is observed.

• Journal of Periodontal and Implant Science
• /
• 제34권3호
• /
• pp.647-657
• /
• 2004

A non-carious cervical lesion(NCCL) is the loss of tooth structure at the cementoenamel junction level that is unrelated to dental caries. This study was to evaluate the occlusal and periodontal status of teeth with non-carious cervical lesions. We evaluated 105 teeth with non-carious cervical lesions in 35 subjects aged 38-75 years and characterized them based on the shape and dimension, plaque retention, bleeding on probing(BOP), probing pocket depth(PPD), occlusal status, brushing type, hypersensitivity and wear facet. The results of this study were as follows 1. No significant association was observed between cervical lesions and occlusal contact in lateral excursions. 2. No significant difference occurred in plaque retention, PPD, BOP between teeth with and without cervical lesions. 3. Test teeth had a significantly higher percentage of hypersensitivity and occlusal wear facet than teeth without cervical lesions. 4. Wedge shaped lesions had a significantly higher percentage of plaque than saucer shaped lesions. 5. Teeth with plaque were found to have significantly deeper PPD than teeth without plaque retention in cervical regions. 6. Teeth with occlusal contacts were found to have significantly deeper PPD than teeth without occlusal contacts. 7. No significant association was observed between cervical lesions and PPD independent of plaque retention and occlusal contacts Although more knowledge is necessary, our results suggest that occlusal contact and bacterial plaque may influence on periodontal tissue, but NCCL is not directly associated with periodontal health

• Transactions on Electrical and Electronic Materials
• /
• 제1권4호
• /
• pp.1-6
• /
• 2000

The mechanical strength of silicon carbide dose nor permit the use of diffusion as a means to achieve selective doping as required by most electronic devices. While epitaxial layers may be doped during growth, ion implantation is needed to define such regions as drain and source wells, junction isolation regions, and so on. Ion activation without an annealing cap results in serious crystal damage as these activation processes must be carried out at temperatures on the order of 1600$^{\circ}C$. Ion implanted silicon carbide that is annealed in either a vacuum or argon environment usually results in a surface morphology that is highly irregular due to the out diffusion of Si atoms. We have developed and report a successful process of using silicon overpressure, provided by silane in a CAD reactor during the anneal, to prevent the destruction of the silicon carbide surface, This process has proved to be robust and has resulted in ion activation at a annealing temperature of 1600$^{\circ}C$ without degradation of the crystal surface as determined by AFM and RBS. In addition XPS was used to look at the surface and near surface chemical states for annealing temperatures of up to 1700$^{\circ}C$. The surface and near surface regions to approximately 6 nm in depth was observed to contain no free silicon or other impurities thus indicating that the process developed results in an atomically clean SiC surface and near surface region within the detection limits of the instrument(${\pm}$1 at %).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 춘계학술대회 논문집
• /
• pp.110-113
• /
• 1992

$n^{+}$-p homojunction InP diodes were fabricated using thermal diffusion of Sulfur into p-type InP substrates(Zn doped, LEC grown, p=2.3${\times}$10$^{16}$c $m^{-3}$). The Sulfur diffusion was carried out at 550$^{\circ}C$, 600$^{\circ}C$, 700$^{\circ}C$ for 4 hours in a sealed quartz ampule(～2ml in volume) containing 5mg I $n_2$ $S_3$ and Img of red phosphorus. The formed junction depth was below 0.5$\mu\textrm{m}$. After the removal of diffused layer on the rear surface of the wafer, the beak ohmic contacts to the p-side were made with a vacuum evaporation of An-Zn(2%) followed by an annealing at 450$^{\circ}C$ for 5 minutes in flowing Ar gas. The front contacts were made with a vacuum evaporation of Au-Ge(12%) followed by an annealing at 500$^{\circ}C$ for 3 minutes in flowing Ar gas. The remarkable sprctral response of the cells obtained at the region of 6000-8000${\AA}$ region. The open circuit voltage $V_{oc}$ , short circuit current density $J_{sc}$ , fill factor and conversion efficiency η of the fabricated pattern solar cells(diffusion condition : at 700$^{\circ}C$ for 4 hours) were 0.660V, 14.04㎃/$\textrm{cm}^2$, 0.6536 and 10.09%, respectively.y.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.623-623
• /
• 2003

I. Objectives The aim of this was to evaluate the use possibility of light curing flowable composite resins as a luting agent for translucent fiber posts. II. Materials and Methods 20 single-rooted maxillary central incisors were selected and crown was sectioned below the cemento-enamel junction to obtain a 13 mm ling root. Root canals were filed, cleaned, and shaped to ＃40 with K-file. Prepared canals were filled with gutta percha and AH26 root canal sealer by lateral condensation method. Teeth were than divided into 4 groups of 5 specimens each. In group 1 and 2, the canal space of each root was enlarged with ＃3 DT Light post preparation drill (Bisco, USA) to a depth of 9mm from the cervical.(omitted)

• 대한치과교정학회지
• /
• 제51권4호
• /
• pp.231-240
• /
• 2021

Objective: This outcome analysis study evaluated the actual positions of the orthodontic miniplate and miniplate anchoring screws (MPASs) and the risk factors affecting adjacent anatomic structures after miniplate placement in the mandibular incisal area. Methods: Cone-beam computed tomographic images of 97 orthodontic miniplates and their 194 MPASs (diameter, 1.5 mm; length, 4 mm) in patients whose miniplates provided sufficient clinical stability for orthodontic treatment were retrospectively reviewed. For evaluating the actual positions of the miniplates and analyzing the risk factors, including the effects on adjacent roots, MPAS placement height (PH), placement depth (PD), plate angle (PA), mental fossa angle (MA), and root proximity were assessed using the paired t-test, analysis of variance, and generalized linear model and regression analyses. Results: The mean PDs of MPASs at positions 1 (P1) and 2 (P2) were 2.01 mm and 2.23 mm, respectively. PA was significantly higher in the Class III malocclusion group than in the other groups. PH was positively correlated with MA and PD at P1. Of the 97 MPASs at P1, 49 were in the no-root area and 48 in the dentulous area; moreover, 19 showed a degree of root contact (19.6%) without root perforation. All MPASs at P2 were in the no-root area. Conclusions: Positioning the miniplate head approximately 1 mm lower than the mucogingival junction is highly likely to provide sufficient PH for the P1-MPASs to be placed in the no-root area.

• Journal of Periodontal and Implant Science
• /
• 제29권2호
• /
• pp.401-415
• /
• 1999

Root surfaces affected by periodontal disease undergo various forms of changes. Cementum exposure from gingival recession may result in absorption of calcium, phosphorus, and fluoride and subsequent hypermineralization and increased radiodensity. Although some reports have suggested that inorganic content with root cementum might show various changes depending upon age or extent of periodontal disease, but no consensus can be reached regarding the the distribution of various elements. The present study examines the difference in mineral content between healthy and periodontal diseased roots by analyzing three areas per tooth along the root surface in cervico-apical direction using electron probe and scanning electron microscope. Healthy tooth that was extracted for orthodontic purpose was used as control. Experimental teeth include those with periodontal pocket depth exceeding 6mm and those with gingival recession and periodontal pocket depth of 2-4mm. Levels of Ca, P, Mg and Na were measured using wavelength dispersive x-ray spectrometer at three areas per tooth. The examined areas were located apical to cemento-enamel junction in control and periodontal ligament-depleted areas in experimental teeth. The corresponding areas were also examined with scanning electron microscope(x70) The results are as follows. 1. Minerals were detected in order of Ca, P, Mg and Na. In all root surfaces, levels of Ca and P were higher in dentin than in cementum. 2. Level of Mg was twice as high in dentin than in cementum. There was no significant difference in the level of Mg and Na between normal and periodontal diseased roots or between the various locations in the same root. 3. Level of Ca and P in the surface cementum showed no difference between normal and periodontal diseased root, although the areas in dentin with high level of either ion also showed high level of corresponding ion in cementum. 4. Difference in the Ca and P content between various locations within the same root was noted, although no coherent pattern existed. These results suggest that although the mineral content of the root cementum in periodontitis-affected tooth is affected by exogenous ions from saliva and food, but there was no difference in the mineral contents between normal and periodontally diseased root.

• Animal Bioscience
• /
• 제35권11호
• /
• pp.1711-1724
• /
• 2022

Objective: The present study was to evaluate the effects of different rapeseed meal substitution (RSM) and glutamine (Gln) supplementation on growth performance, intestine morphology, and intestinal mucosa barrier of broilers. Methods: Four hundred and twenty Qiandongnan Xiaoxiang Chicken at 1 day of age with similar weight were chosen and were randomly assigned into 7 groups, consisting of 10 replicates per group and 6 broilers per replicate. Three groups were provided with diets separately containing 0%, 10%, and 20% RSM, and the other four groups were fed with diets separately supplemented with 0.5% and 1% Gln based on the inclusion of 10% and 20% RSM. At 21 and 42 days of age, 10 broilers per group were chosen to collect plasma and intestinal samples for further analysis. Results: The results showed that 10% RSM decreased average daily feed intake (ADFI) and average daily weight gain (ADG) of broilers at 21 days of age (p<0.05). Furthermore, both ADFI and ADG of broilers at 21 and 42 days of age were decreased by 20% RSM, while feed conversion ratio (FCR) was increased (p<0.05). Besides, 10% RSM resulted in lower intestinal villus height and the ratio of villus height to crypt depth, deeper crypt depth (p<0.05), combined with the lower mRNA expressions of occludin, claudin-1, and zonula occludens-1 (ZO-1) in broilers at 21 days of age (p<0.05). Similar results were also observed in broilers at 21 and 42 days of age fed with 20% RSM. However, 1% Gln improved the growth performance of broilers fed with 10% and 20% RSM (p<0.05), ameliorated intestine morphology and elevated mRNA expressions of occludin, claudin-1 and ZO-1 (p<0.05). Conclusion: In conclusion, the increasing inclusion of RSM resulted in more serious effects on broilers, however, 1.0% Gln could reverse the negative effects induced by the inclusion of RSM.

• 대한소아치과학회지
• /
• 제49권3호
• /
• pp.253-263
• /
• 2022

협측소와는 하악 대구치 발달구의 말단에 나타나는 강한 점상의 함몰된 구조이다. 협측소와 결함은 협측소와가 상아질까지 침범한 상태로 정의할 수 있다. 이 연구는 콘빔 컴퓨터 단층촬영(CBCT) 분석을 통해 소아청소년의 하악 제1대구치 및 제2 대구치에서 협측소와 및 협측소와 결함의 발생 빈도를 조사하는 것을 목적으로 하였다. 연구는 2004년부터 2020년까지 연세대학교 치과병원 소아치과를 방문한 한국 소아청소년 417명을 대상으로 촬영한 CBCT 영상을 대상으로 수행하였다. 협측소와의 발현율은 29.1%로 보고되었다. 제4급 협측소와에 해당하는 협측소와 결함의 유병률은 총 7.9%였다. 협측소와는 양측성으로 나타나는 경향이 있었다. 이 연구는 협측소와의 빈도에 대해 가장 큰 표본 크기를 사용하여 시행한 포괄적인 연구이며, CBCT를 이용한 최초의 연구였다. 또한 협측소와 결함을 최초로 정의 내리고자 하였다.