• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.369-379
• /
• 2001

The aim of this study was to investigate the periodontal response according to the timing of orthodontic force application after bone graft into the angular bony defect. Nine dogs were divided into three groups, 2, 4, and 6 weeks, according to the timing of orthodontic force application after bone graft. Periodontal angular bony defects were created surgically at the distal aspect of both maxillary third incisors. Two weeks later, flap operation was performed to eliminate inflammation and reference notch was made on the root surface at the level of the bottom of each defect. Demineralized freeze-dried bone was implanted on the left side whereas only debridement was done on the other side. Experimental tooth movement was executed during 8 weeks on both graft and non-graft sides. After 2 weeks of retention period, animals were sacrificed for histologic specimens. The results were obtained as follows 1 New bone formation was more pronounced in the graft side than in the non-grad side in all experimental animals. 2. In the 6-week group, new bone and cementum formation was observed in more than half from the notch to the cemento-enamel junction, and the zone of connective tissue attachment was found without apical migration of junctional epithelium. 3. In the 4-week group, the amount of new bone formation was smaller than in the 6-week group whereas the overall remodeling pattern was similar. 4. New bone formation was confined to around the notch and the junctional epithelium migrated apically to the level of the notch with no connective tissue attachment and cementum formation in the 2-week group. The results of the present study suggest that periodontal response may be influenced by the timing of orthodontic force application after bone graft into angular bony defect.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.1
• /
• pp.1-8
• /
• 1994

The purpose of this study was to evaluate the effect of the canal filling sealer to resin cement When posts were cemented in the endodontically treated teeth, 86 incisors were used. The coronal portion of the teeth were removed at the cemento-enamel junction, every tooth was done treatment of canal. And the teeth was divided was into 12 groups. G : I a n : 7 Treatment : Z.P.C (1 day after Z.O.E. sealer) G : I b n : 7 Treatment : All-Bond (3 day after sealer) G : II a n : 8 Treatemt : Z.P.C (3 day after sealer) G : II b n : 7 Treatemt : All-Bond (3 day after sealer) G : III a n : 8 Treatemt : Z.P.C (7 day after sealer) G : III b n : 8 Treatemt : All-Bond (7 day after sealer) G : IV a n : 7 Treatemt : Z.P.C (1 day after Apexit sealer) G : IV b n : 7 Treatemt : All-Bond (1 day after sealer) G : V a n : 7 Treatemt : Z.P.C (3 day after sealer) G : V b n : 7 Treatemt : All-Bond (3 day after sealer) G : VI a n : 7 Treatemt : Z.P.C (7 day after sealer) G : VI a n : 7 Treatemt : All-Bond (7 day after sealer) Ready made stainless steel Para-post(PD-K-3) was cemented with Z.P.C. in subgroup a, and cemented with All-Bond & composite resin cement in subgroup b to depth 7mm. After 5 days at cementation of post, teeth with cemented posts were mounted on a retention jig and the failure loads of the specimens were measured by an Instron Universal Testing Machine. The results were as follows. 1. The results of failure loads were $15.5{\pm}7.1kg$ in group I b, $21.6{\pm}5.4kg$ in group II b and $20.1{\pm}18.1kg$ in group III b, and there was no statistically significant , difference between each group(p>0.05). 2. The results of failure loads were $19.0{\pm}6.7kg$ in group IV b, $17.3{\pm}6.5kg$ in group V b.and $18.9{\pm}7.9kg$ in group VI b and there was no significant difference between each other(p>0.05). 3. In same condition, the failure load of subgroup a was largely higher the subgroup b. But there was no significant difference between each other(p>0.05).

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.53-60
• /
• 2009

Statement of problem: At present, as the esthetic demands are on the increase, there are many ongoing studies for tooth-colored post and cores. Most of them are about fiber post and prefabricated zirconia post, but few about one-piece milled zirconia post and core using CAD/CAM (computer-aided design/computer-aided manufacturing) technique. Purpose: The objective of this study was to compare microleakage of endodontically treated teeth restored with three different tooth-colored post and cores. Material and methods: Extracted 27 human maxillary incisors were cut at the cementoenamel junction, and the teeth were endodontically treated. Teeth were divided into 3 groups (n=9); restored with fiber post and resin core, prefabricated zirconia post and heat-pressed ceramic core, and CAD/CAM milled zirconia post and core. After the preparation of post space, each post was cemented with dual-polymerized resin cement (Variolink II). Teeth were thermocycled for 1000 cycles between $5-55^{\circ}C$ and dyed in 2% methylene blue at $37^{\circ}C$ for 24 hours. Teeth were sectioned (bucco-lingual), kept the record of microleakage and then image-analyzed using a microscope and computer program. The data were analyzed by one-way ANOVA and Scheffe's multiple range test (${\alpha}=0.05$). Results: All groups showed microleakage and there were no significant differences among the groups (P>.05). Prefabricated zirconia post and heat-pressed ceramic core showed more leakage in dye penetration at the post-tooth margin, but there was little microleakage at the end of the post. Fiber post and resin core group and CAD/CAM milled zirconia post and core group indicated similar microleakage score in each stage. Conclusion: Prefabricated zirconia post and heat-pressed ceramic core group demonstrated better resistance to leakage, and fiber post and resin core group and CAD/CAM milled zirconia post and core group showed the similar patterns. The ANOVA test didn't indicate significant differences in microleakage among test groups. (P>.05)

• Investigative Magnetic Resonance Imaging
• /
• v.7 no.1
• /
• pp.47-55
• /
• 2003

Purpose : Cortical dysplasia is known to be of variety of MR imaging findings. We attempted to classify MR imaging findings of cortical dysplasia into several types and to correlate those with histopathologic grades and subtypes. Materials and Methods : Preoperative MR images of 97 patients with pathologically-proven cortical dysplasia were retrospectively reviewed with knowledge of the diagnosis and operative sites. The patients were divided into MR-positive and MR-negative groups based on the presence or absence of MR imaging abnormalities. In MR-positive group, MR imaging features were arbitrarily classified into four types (atrophic, cortical-band, inward-rounding, and nonspecific types) on the basis of size of the gyrus and adjacent CSF space, cortical thickness, signal intensity of the subcortical white matter, and blurring of the gray-white matter junction. The pathologic findings were also retrospectively reviewed without knowledge of MR imaging findings and divided into three grades (mild, moderate, and severe) and two subtypes (nonballoon-cell and balloon-cell). Pathologic grades and subtypes we re compared between MR-positive and MR-negative groups. Four MR types of the MR-positive group were correlated with the pathologic grades and subtypes. Results : MR-positive and MR-negative groups consisted of 39 (40%) and 58 (60%) patients, respectively. Of the MR-positive group, atrophic type was seen in 13 patients (33 %), cortical-band type in 9 (23%), inward-rounding type in 9 (23%), and nonspecific type in 8 (21%). There was no significant difference in the pathologic grades between MR-positive and MR-negative groups, although MR-positive group tended to have higher pathologic grades than MR-negative group did. Balloon-cell subtype was found significantly higher in MR-positive group than in MR-negative group (p<0 .05): 21% (8/39) versus 5% (3/58). The inward-rounding type corresponded to the pathologically severe grade and balloon-cell subtype in 78% (7/9) and 56% (5/9) of the patients, respectively, while the atrophic type to the mild grade and nonballoon-cell subtype in 77% (10/13) and 100% (13/13), respectively. Conclusion : A variety of MR imaging abnormalities were found in 40% of the patients with cortical dysplasia and those were classified into four types (atrophic, cortical-band, inward-rounding, and nonspecific types), of which the inward-rounding type correlated well with the pathologically severe grade and balloon-cell subtype, whereas the atrophic type with the mild grade and nonballoon-cell subtype.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.3
• /
• pp.13-19
• /
• 2018

The soldering property of Pb-containing solder(Sn-Pb) and Pb-free solders(Sn-3.0Ag-0.5Cu and Sn-1.0Ag-0.7Cu-1.6Bi-0.2In) for solar combiner box module was compared. The solar combiner box module was composed of voltage and current detecting modules, diode modules, and other modules. In this study, solder paste printability, printing shape inspection, solder joint property, X-ray inspection, and shear force measurements were conducted. For optimization of Pb-free soldering process, step 1 and 2 were divided. In the step 1 process, the printability of Pb-containing and Pb-free solder alloys were estimated by using printing inspector. Then, the relationship between void percentages and shear force has been estimated. Overall, the property of Pb-containing solder was better than two Pb-free solders. In the step 2 process, the property of reflow soldering for the Pb-free solders was evaluated with different reflow peak temperatures. As the peak temperature of the reflow process gradually increased, the void percentage decreased by 2 to 4%, but the shear force did not significantly depend on the reflow peak temperature by a deviation of about 0.5 kgf. Among different surface finishes on PCB, ENIG surface finish was better than OSP and Pb-free solder surface finishes in terms of shear force. In the thermal shock reliability test of the solar combiner box module with a Pb-free solder and OSP surface finish, the change rate of electrical property of the module was almost unchanged within a 0.3% range and the module had a relatively good electrical property after 500 thermal shock cycles.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.88-94
• /
• 2014

In this paper, Thermal Shock tests were performed varying the composition of the solder and ribbon thickness (A-type:0.2mm/60Sn40Pb, B-type:0.25mm/60Sn40Pb, C-type:0.2 /62Sn36Ag2Pb, D-type:0.25mm/62Sn36Ag2Pb) for evaluating the long-term reliability about Ribbon junction of Silicon solar cells. Thermal Shock test condition was performed during the 600cycles having $-40^{\circ}C{\sim}85^{\circ}C$ temperature range each 15 minutes; One cycle time was 30min. As a result, the initial efficiency of the A-type, B-type, and C, D-type were showed 15.0%, 15.4% and 15.8% respectively. After thermal shock test, the efficiency decreasing-rate of each type were as follow that A-type was 13.8%, B-Type was 15.4%. C-Type and D-Type was 15.3% and 16.2%, respectively. Also, degradation of surface changes and I-V characteristic curves were showed that the series resistance of the A, C-type was increased. Also, current lowering starting point of C-type shown 0.05volt[v] earlier than that of A-type. And B, D-type shown characteristics of composite lowering efficiency such as increase of series resistance, decrease of parallel resistance and cell damage. Therefore Initial solderability and efficiency of specimens using the solder with SnAgPb were superior. But, It has inferior the long-term reliability. The test was confirmed that as the ribbon thickness increases, long-term reliability of solar cell will decrease.

• Applied Microscopy
• /
• v.25 no.4
• /
• pp.83-103
• /
• 1995

This experiment was carried out to investigate the effects of telluric acid on the histological and fine structural changes in the rat liver. Fischer 344 rats($150{\sim}200gm$) were used in this study as control and experimental groups. Telluric acid(5 mg/100 gm of body weight) suspensed in olive oil was given intraperitoneally to the animals of the experimental group and only olive oil to those of the control group. At the intervals of 3, 6 and 12 hours, 1, 2, 3, 5, 10, 20, 30 and 60 days after administration, the animals were sacrificed, and livers were obtained from the rats. For light microscopic examination of the liver, sections($5{\mu}m$) were stained with hematoxylineosin(H-E). For electron microscopic examination of the liver, sections were stained with uranyl acetate and lead citrate, finally examined with Zeiss EM 109 electron microscopes. The results obtained were as follows. 1. In the control group, round nucleus. well developed mitochondria, Golgi apparatus, rough endoplasmic reticulum(RER) and numerous glycogen particles were observed in the cytoplasm of the hepatocyte. In the cytoplasmic membranes of the hepatocyte, sinusoidal surface had numerous microvilli and cellular surface is combinated adjacent hepatocyte with desmosomes. The RER cisterns were dilated and zymogen granules were fewer than those of the dark cells. Kupffer cells with irregular nuclear membrane were observed. Fat storing cell and collagenous fiber bundle were observed in the Disse space. 2. Kupffer cell, inflammatory cells in the connective tissue of hepatic triad and lysosome were increased in the 3, 6, and 12 hour experimental group comparing with that of the control group. 3. In the 1 day experimental group, infiltration of inflammatory cells in interlobular connective tissue, dilatation of sinusoidal capillary and increasing of Kupffer cell were observed. Atropic change of hepatocyte and aggregation of glycogen particles in the cytoplasm of hepatocyte were observed. In this group, desmosome near bile canaliculi and collagenous fiber bundle in the Disse space were increased comparing with that of the 12 hours experimental group. In the 2 days experimental group, desmosome, lysosome, peroxisome and collagenous fiber bundle were increased comparing with that of the 1 day experimental group. Furthermore, lamellated bodies were also seen in the cytoplasm of the hepatocyte. 4. In 3 and 5 days experimental groups, transformations of hepatic cell cord and degeneration of the hepatocyte were markedly inclosed comparing with the all experimental groups. And damaged RER and mitochondria. collagenous fiber bundle were also inclosed comparing with that of the 2 days experimental group. Autophagosome and fat storing cells with large lipid droplets were also observed comparing with that of the 2 days experimental group. Tight junction and desmosome between the hepatocytes were separated. These degenerating changes were severe through the all experimental groups. 5. In the 10 and 20 days experimental groups, arrangement of hepatic cell cords and cell organelles of hepatocytes were similar to those of the control group. However, aggregation of glycogen particles, dilatation of sinusoidal capillary and infiltration of inflammatory cells remained. 6. In the 30 days experimental group, the tissue findings were similar to those of the control grout. But lamellated bodies in some hepatocytes and lysosome were remained in the cytoplasms of the Kupffer cells. In the 60 days experimental group, these all changes were recovered as the control group. In conclusion, telluric acid would directly induce the degenerative and necrotic changes on the hepatic tissue. However, these changes were perfectly recoverd in the 60 days experimental group as the control group.

• Childhood Kidney Diseases
• /
• v.3 no.1
• /
• pp.88-94
• /
• 1999

Purpose : Malformation of urinary tract is among the most common of all congenital anomalies and can progress to irreversible renal damage before diagnosis due to difficulty of early diagnosis. Present study was undertaken to determine the clinical characteristics of urinary tract anomaly and to find out the most appropriate diagnostic and therapeutic measures for children with these anomalies. Methods : During the past 10 years from 1987 to 1998, review of medical records revealed 65 children with congenital anomaly of urinary tract and the following results were obtained. Results : The most common anomalies were ureteropelvic junction obstruction occuring in 26 cases ($36\%$), followed by ureteral duplication in 11 cases, renal agenesis in 10 cases and ureterovesical function obstruction in 7 cases. Complex anomaly of urinary tract was found in 8 cases and anomaly of other systems such as congenital heart disease was detected in 11 cases. The most frequent age group at the time of diagnosis was below 1 year of age constituting 39 cases ($60\%$) and male preponderance was noted as male to female ratio being 2.25:1. Presenting symptoms were urinary tract infection in 25 cases, followed by hematuria, abdominal mass, abdominal pain and voiding difficulty, etc, and in 11 cases, the anomaly was picked up by routine prenatal ultrasonography. Azotemia was noted in 9 cases and the underlying anomaly was obstructive uropathy in 4 out of these 9 cases. Surgical correction was undertaken in 38 cases (most frequently in cases of obstructive uropathy) and in 2 out off cases with obstructive uropathy in whom surgical correction was done, azotemia disappeared during follow up period of 1-5years. No new cases of deteriorating renal function appeared during follow-up period. Conclusion : In spite of high incidence of congenital malformation of urinary tract, early diagnosis is still hampered by nonspecific symptoms and signs. Therefore, in patients with symptoms such as urinary tract infection, abdominal pain and voiding problems, etc, it Is advisable to take various diagnostic tests promptly to pick up any urinary tract anomaly and to apply proper therapy in order to avoid progression to irreversible renal damage. In this regard, prenatal ultrasonography should be utilized more widely as a routine procedure to detect any urinary tract anomalies before birth.

• Childhood Kidney Diseases
• /
• v.1 no.1
• /
• pp.31-37
• /
• 1997

The DMSA scan is a useful radiologic study in diagnosis of morphologic and functional diseases of kidney. We evaluated the distribution of sex and age, clinical manifestations, diagnosis, combined diseases, treatment and prognosis of the 61 patients with non-functioning kidney(no isotope uptake or uptake below 5% in DMSA scan) who admitted in our hospital from 1980 to 1995. The proportion of patients under 1 year old age was 46%. Sex ratio was 1.4:1 with male predominance. Most diagnosis of non-functioning kidneys were congenital such as multicystic dysplastic kidney, hydronephrosis due to ureteropelvic junction obstruction, renal agenesis and renal hypoplasia. In order of frequency thirty one percent of them were previously detected on antenatal ultrasonogram. Treatment consisted of operation in 47.5%, mostly nephrectomy and 32.8% of patients were followed up at OPD base without definite treatment. The most common combined diseases was hydronephrosis, in 4patients who had both kidneys inveloved progressed to chronic renal failure, but the prognosis in most cases were good. It is important to evaluate renal diseases in perinatal periods, and we believe that highly sensitive diagnostic study contribute to early treatment plan and thus to good prognosis.

• Journal of Chest Surgery
• /
• v.39 no.7 s.264
• /
• pp.544-548
• /
• 2006

Background: The purpose of this study is to evaluate the validity of a combined high saphenous vein division and sclerotherapy without sacrificing saphenous vein for varicose vein. Material and Method: Between August 2004 and October 2005, 70 limbs in 50 patients were treated by a combined high saphenous vein division and sclero-therapy. The operative indication is valvular incompetence of femoral-saphenous or popliteal-saphenous junction. Patients received local anesthesia and were treated by a combined high saphenous vein division, ligation of incompetent perforating vein and $1{\sim}3%$ sclerosant. Patients received 1 day hospitalization and applied in com-pression stocking for 6 weeks. Patients followed after 1 week, 1 and 3 months. Result: Mean age of patients was $50{\pm}11$. The female was more common. 8 patients was no symptom, another 42 patients complained of pain, heaviness and fatigue of limbs. The symptoms of varicose vein disappeared 1 month after the procedure in all symptomatic patients. 8 patients needed a adjuvant sclerotherapy for residual varicose vein on 1 week after the procedure. There were only minor complications such as hematoma (1), wound infection (1), thrombophlebitis (20), skin blister (10), hyper-pigmentation (1), and skin ulcer (1). Conclusion: We concluded that a combined high saphenous vein division and sclerotherapy without sacrificing saphenous vein for varicose vein is simple, less invasive, economical, and effective treatment for primary varicose vein, and it has a special advantage that saphenous vein can be used as a bypass conduit later. The method was selective in old aged patients.