• Applied Biological Chemistry
• /
• 제22권4호
• /
• pp.210-216
• /
• 1979

RNA degrading bacteria were isolated from soil of Korea. One strain (no. JSC-114), having strong 5'-phosphodiesterase activity, was identified as belonging to the genus Streptomyces on the basis of taxonomic characteristics. The optimum conditions of 5'-phophosdiesterase production were found at $30^{\circ}C$ for 4 day in a medium containing 4.5% of soluble starch, 0.15% of peptone, 0.6% of yeast extract, 0.1% of $MgSO_4{\cdot}7H_2O$, 0.01% of $CaCl_2{\cdot}2H_2O$, 0.25% of $KNO_3$, and 0.5% of $KH_2PO_4$(pH 7.0). The maximum production rate of 5'-nucleotides from yeast RNA was 95% at $40-45^{\circ}C$ for 4hrs, and the products were identified as 5'-IMP, 5'-GMP, 5'-CMP and 5'-UMP(5.5 : 5.0 : 4.9 : 5.0).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.448-449
• /
• 2008

HIT(Heterojunction with intrinsic thin layer) solar cell은 결정 실리콘 (c-Si)을 n-type으로 제작시 수율이 어렵고 결정 실리콘 (c-Si)을 p-type위에 제조하는 것이 보다 보편적인 방법이므로 베이스의 결정 실리콘에는 p-type을, 그 위에는 진성 층(intrinsic layer) 그리고 반투명 전극의 아래에 제조되는 비정질 실리콘 (a-Si)을 n-type으로 하여 베이스 층과 TCO 후면 층의 두께, 도핑 농도 (doping concentration)와의 관계를 확인하여 본다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.197-197
• /
• 2009

전기도금방법으로 여러형태의 ZnO 나노구조를 ITO/glass 위에 전착하였다. 그 중 sheet 형태의 ZnO 나노구조 위에 $TiO_2$와 CdSe 나노입자를 전기화학적 방법으로 전착하여 유 무기 복합태양전지 및 염료감응형 태양전지의 anode로 적용하였다. 동일조건 하에서 ZnO-CdSe 형태의 전극을 사용하였을 때 Jsc, Voc 값이 상대적으로 다른 전극에 비해 증가하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 2013년도 춘계학술대회 논문집
• /
• pp.181-182
• /
• 2013

저온 공정을 통한 저가형의 태양전지를 만들기 위해 ALD 공정 법으로 Zinc oxide의 전도성을 조절하여 전기 증착법을 통해 성장시킨 Cuprous oxide와 p-n heterojunction을 구성하고 태양전지를 제작하였을 때 최적의 효율을 확인하였다. 전도성이 낮아질수록 전착법과의 p-n junction에서의 Jsc값이 증가하여 100도의 Zinc oxide의 경우 0.13%의 태양전지 효율을 보였다.

• ETRI Journal
• /
• 제28권5호
• /
• pp.656-659
• /
• 2006

This letter presents a new polarizer which has a simple comb structure inside a circular waveguide. The electrical performance of the proposed comb polarizer is optimized by a circular waveguide radius and by the physical parameters of the comb plates. This polarizer is suitable for providing good performance in millimeter-band application because of its simple structure and low fabrication cost. In our experiments the dual-band comb polarizer designed in band 1(K) and band 2(Ka) showed good electrical performance without any tuning elements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.314-314
• /
• 2016

In this paper, the effects of carrier concentration on dielectric constant of ITO films were investigated by spectroscopic ellipsometry. From SE results, we find the pronounced shift of the ${\varepsilon}1$ peaks toward high energy with concentration; while contrarily, the ${\varepsilon}2$ values at low energy region increases with decreasing concentration. These shifts are attributed to the Burstein-Moss and free-carrier absorption effects within ITO films. With increases carrier concentration, the values of extinction coefficients show quite different behaviors in range of wavelength from 200 to 1200 nm. The reduction in k at ${\lambda}{\leq}500nm$, while increasing at ${\lambda}{\geq}500nm$ was observed. The QE of HJ solar cells behaviors can be roughly classified into two regions: short-wavelengths (${\leq}650nm$) and long-wavelengths region (${\geq}650nm$). With increasing carrier concentration as well as energy band gap, QE shows improvement at short-wavelength, while at long-wavelength QE shows opposite trend. Widening band gap energy due to Burstein-Moss shift is the key to improve QE in short-wavelength; simultaneously FCA effect due to optical scattering is attributed to the reduction in QE at long-wavelength. In spite of band gap extension, Jsc calculated from QE decreases from 34.7 mA/cm2 to 33.2 mA/cm2 with increasing carrier concentration. It demonstrated that FCA effect may more govern Jsc in the HJ solar cells.

• Journal of the Korean Geotechnical Society
• /
• 제31권7호
• /
• pp.53-63
• /
• 2015

For the success of future missions to the Moon and other similar cosmic environments, understanding and utilization of the lunar regolith has become essential. However, due to the scarcity and unaffordability of real lunar regolith on Earth, a number of lunar regolith simulants (e.g., JSC-1; NASA) have been developed for experimental purposes. However, Korea does not have its own lunar regolith, even though the country is planning to actively pursue lunar and space missions in the 2020s. Thus, this study has been conducted to develop a Korean lunar simulant prototype via basic feasibility attempts (e.g., raw material selection, particle size and chemical composition simulation). Finally, the first prototype of Korea's own lunar simulant has been obtained, and denominated as KLS-1.

• Journal of the Korean Institute of Telematics and Electronics
• /
• 제18권4호
• /
• pp.21-26
• /
• 1981

SnO2/n-Si and ITO/n-Si SIS solar cells have been fabricated ty mears of electron-beam deposition. The optimum oxidation and heat-treatment condition for SnO2/n-Si cells and ITO/n-Si cells are 50$0^{\circ}C$-5min., 30$0^{\circ}C$-10min., and 50$0^{\circ}C$-5min., 30$0^{\circ}C$-20min. respectively. The open-circuit Voltage(Voc), short-circuit current density(Jsc), fill factor(FF), and efficiency (η) under AMI(100mW/$\textrm{cm}^2$) illumination were 0.4V, 34mA/$\textrm{cm}^2$, 0.44, and 6.0%(active area efficiency, 6.9%) for SnO2/n-Si solar cells, and 0.44V, 36mA/$\textrm{cm}^2$, 0.53, and 8.45%(active area efficiency, 9.71%) for ITO/n-Si solar calls.

• Journal of Korean Library and Information Science Society
• /
• 제47권3호
• /
• pp.71-94
• /
• 2016

This study was to suggest the construction of work and expression authority records for FRBRization. ICP, FRBR/FRAD and RDA as the content rules were referred as the framework for the construction of work and expression authority records. LC RDA authority records examples, JSC of RDA authority examples, and VIAF work and expression authority records were analyzed as case studies. 5 findings were suggested. First, authority records consist of name, work, and expression authority records which are inter-related. Second, the construction of authorized access points was suggested according to 5 work types. Third, the consideration in describing work attributes as separate element and as part of an authorized access point, and other distinguishing characteristic of the work were suggested. Fourth, the consideration in describing expression attributes as separate element and as part of an authorized access point, and other distinguishing characteristic of the expression were suggested. Fifth, 5XX was suggested for linking between work and expression. This study would contribute to revise KCR4.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• 제7권2호
• /
• pp.315-323
• /
• 1997

The sing1e crystal of cadmium sulfide was grown by vertical sublimation method. The lattice constants of CdS single crystal by extrapolation method are $a_0=4.139\AA$ and $c_0=6.719\AA$, respectively. The $Cu_2$S/CdS solar cell was fabricated using the single crystal of cadmium sulfide and the CuCl solution. The light- to- dark JV cross over effect of the $Cu_2$S/CdS solar cell was measured after annealing for 2 minutes at $250^{\circ}C$ in air atmosphere. The values of Voc, Jsc, Vop, FF, and efficiency are 0.40 volt, $4.2mA/\textrm{cm}^2$, 0.31 volt, $3.8mA/\textrm{cm}^2$, 0.68 and 3.8 %, respectively. The spectral response of the solar cell shows the peaks at 498 nm (2.49 eV) and 585 nm (2.12 eV).