• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.81-81
• /
• 2004

• Proceedings of the Korean Vacuum Society Conference
• /
• 1995.06a
• /
• pp.30-30
• /
• 1995

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.225-229
• /
• 2008

We present an intelligent forging simulator AFDEX. The intelligent forging simulator is determined by the adaptive and optimal mesh generation technique and many intelligent application-oriented special functions which minimize the user-intervention during forging simulation. Of course, the solution accuracy should be optimized in the intelligent simulation. We have developed AFDEX to meet the requirement on intelligent simulation. Its characteristics are introduced with the help of typical application examples.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.157-165
• /
• 1994

A general-purpose program for automatic two-dimensional finite-element modelling with quadrilateral elements was developed in this research. The conventional looping method employed in the program was introduced with emphasis on a new splitting criterion and a splitting scheme developed for improving the method. Some application examples were given, which show versatility and applicability of the developed program.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.304-310
• /
• 2017

This study was conducted over a 3-year period from 2013 to 2015 in the mid-northern inland, Cheolweon, Korea, to investigate changes in flowering date, daily mean temperature during grain filling, and yield characteristics affected by transplanting date in an early-maturing rice variety, 'Joun'. Thirty-day-old seedlings were transplanted at four different dates at 15-day interval from May 5 to June 19. Flowering dates were July 16, July 21, July 31, and August 14 when transplanting was performed on May 5, May 20, June 4, and June 19, respectively. Late transplanting resulted in higher daily mean temperature before flowering but late-transplanted rice required fewer days and lower cumulative temperature to reach flowering from transplanting. As transplanting was delayed, daily mean temperature for 40 days after flowering decreased, whereas daily sunshine hours for the same period increased, with a temperature of $24.8^{\circ}C$ and sunshine for 5.8 hours being recorded at the transplanting on May 5, and with a temperature of $21.0^{\circ}C$ and sunshine for 7.7 hours at the transplanting on June 19. With late transplanting, panicles per square meter significantly decreased, whereas spikelets per panicle showed an increasing trend. Regression analysis showed that maximum head rice yield was attained from the transplanting on May 18, for which the flowering date was July 21, and daily mean temperature for 40 days from that flowering date was $24.6^{\circ}C$. A decrease in head rice yield by 5% and 10% of the maximum was observed for rice transplanted on June 6 and June 15, which resulted in flowering dates of August 2 and August 11, respectively, and the daily mean temperatures for 40 days from flowering were 23.2 and $21.7^{\circ}C$, respectively. Therefore, in mid-northern inland, it is recommended to transplant 'Joun' on May 18 to induce flowering on July 21, when grain filling is subjected to a daily mean temperature of $24.6^{\circ}C$ during active filling stage.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.313-317
• /
• 2010

There are the farmer's needs to develop early-maturing cultivar adaptable to mid-northern inland plain and alpine area. Furthermore, it is required to develop a rice variety to produce new rice before concentrated marketing dates, even in the years of early Chuseok. 'Joun' is a new extremely early-maturing japonica rice cultivar developed in 2009 from the cross of SR14880-173-3-3-2-2-2/Unbong20 at Cheolwon Substation, National Institute of Crop Science (NICS), Rural Development Administration (RDA). The heading date of 'Joun' is July 23 in mid-northern alpine area, which is 7 days earlier than that of Odaebyeo. It has about 61 cm in culm length with semi-erect plant type. Panicle has a few awns and its exertion is good. The number of spikelets per panicle is smaller than that of Odaebyeo and 1,000 grain-weight of brown rice is 21.2 g which is less than 26.3 g of Odaebyeo, but the complete grain ratio is higher. Milled kernels are translucent with non-glutinous endosperm and palatability of cooked rice is good. It shows strong resistance to cold treatment, lodging, premature heading, wilting and viviparous germination during ripening stage. This cultivar shows resistance to leaf blast disease but susceptible to bacterial blight, virus disease and insect pests. The milled rice yield performance of 'Joun' is about 5.18 MT/ha by ordinary culture in local adaptability test for three years. This cultivar may be highly adaptable to the mid-northern inland plain and alpine area, north-eastern coastal area and middle plain area.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.144-148
• /
• 2007

In this paper, we present a systematical procedure to develop a precision enclosed die forging process for a bevel gear of a passengers' car. The detailed procedure involves bear gear CAD modeling, process design and CAE simulation, CAM and die making, material preparation, and prototype manufacturing using both the technologies and machines accumulated and equipped in the technology innovation center(TIC) of Gyeongsang National University. It is demonstrated that the presented approach guarantees bevel gears with the second KS grade quality, which can be used for the differential gear of the passengers' car.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.352-356
• /
• 2007

In this study, a rigid-plastic finite element method is applied to simulating a ring rolling process of the inner race cage of a constant velocity joint for the passengers' cars. The ring rolling process is mathematically modeled by several assumptions. The defect formation at the side ends is predicted in detail. The predictions are compared with the experiments and a good agreement is observed in terms of deformed shape.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.347-351
• /
• 2007

The influence of compaction pressure and sintering temperature on the hydraulic cylinder block fabricated by powder metallurgy is investigated in this study. The cylinder block is powder compacted under various compaction pressures and sintered under various sintering temperatures, and its density and dimensions are measured to reveal the relation of the process condition with the product quality. Moreover, finite element analyses of the density distributions are conducted under the same conditions with the experiments and the predicted results are compared with the measured ones.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.170-175
• /
• 2007

The finite volume method for forging simulation is examined to reveal its possibility as well as its problem in this paper. For this study, the finite volume method based MSC/SuperForge and the finite element method based AFDEX are employed. The simulated results of the homogeneous compression obtained by the two softwares are compared to indicate the problems of the finite volume method while several application examples are given to show the possibility of the finite volume method for simulation of upsetter forging processes. It is shown that the finite volume method can not predict the exact solution of the homogeneous compression especially in terms of forming load and deformed shape but that it is helpful to simulate very complex forging processes which can hardly be simulated by the conventional finite element method.