• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.47-53
• /
• 2021

Gait kinematics and kinetics have a similar tendency between men and women, yet it remains unclear how walking while carrying a load affects the gait mechanism. Twenty adults walked with preferred velocity on level ground of 20 m relative to change of a load carriage (no load, 15%, 30% of the body weights) aimed to observe gait mechanism. We measured gait posture using the three-dimensional image analysis and ground reaction force system during stance phase on left foot. In main effect of gender difference, men showed increased displacement of center of gravity (COG) compared to women, and it showed more extended joint angle of hip and knee in sagittal plane. In main effect of a load difference, knee joint showed more flexed postuel relative to increase of load carriage. In main effect of load difference on the kinetic variables, medial-lateral force, anterior-posterior force (1st breaking, 2nd propulsive), vertical force, center of pressure (COP) area, leg stiffness, and whole body stiffness showed more increased values relative to increase of load carriage. Also, men showed more increased COP area compared to women. Interaction showed in the 1st anterior-posterior force, and as a result of one-way variance analysis, it was found that a load main effect had a greater influence on the increase in the magnitude of the braking force than the gender. The data in this study explains that women require little kinematic alteration compared to men, while men in more stiff posture accommodate an added load compared to women during gait. Additionally, it suggests that dynamic stability is maintained by adopting different gait strategies relative to gender and load difference.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.4
• /
• pp.199-207
• /
• 2022

Purpose : The purpose of this study is to investigate the effect of shoulder stabilization exercise accompanied by application of a pelvic compression belt on the muscle activity, pain and function of the muscles around the shoulder in subjects with round shoulders. Methods : For the study method, 28 students who were enrolled in K University with a distance of 1 cm or more between the clavicle of the peak and the outer ear path were selected through GPS 400 global postural analysis system measurement. The subjects were randomly assigned to 14 participants in the group wearing a pelvic compression belt and 14 patients in the group not wearing a pelvic compression belt. In all subjects, the muscle activities of the middle trapezius, lower trapezius, and serratus anterior muscles and the shoulder pain disorder index (SPADI) were measured. The intervention was performed 3 times a week for 4 weeks, and the applied intervention was push-up plus and modified prone cobra exercise. The muscle activities of the middle trapezius, lower trapezius, and serratus anterior muscles and SPADI score were compared using dependent t test before and after intervention. Results : In this study, both groups showed that the muscle activity of the middle trapezius, lower trapezius, and serratus anterior significantly increased after the intervention compared to before the intervention. On the other hand, SPADI showed no significant difference. Conclusion : The results of this study showed that muscle activity in the peri-shoulder joint was increased after push-up plus and modified prone cobra exercise in both groups, regardless of whether pelvic compression was applied or not. Therefore, it was found that shoulder stabilization exercise using the pelvic compression belt also contributed to the enhancement of muscle activity in the joints around the shoulder.

• PNF and Movement
• /
• v.21 no.1
• /
• pp.139-146
• /
• 2023

Purpose: The aim of this study is to provide basic information to create an efficient training program to improve shoulder stability and function in patients with injuries and in patients having undergone surgery of the supraspinatus and infraspinatus muscles, which have a relatively high incidence of injury in shoulder joint disease. Further, independent activities of the supraspinatus and infraspinatus muscles were investigated according to forearm rotation and the neutral and lateral rotation postures. Methods: The activities of the supraspinatus and infraspinatus muscles were measured using surface electromyography in 22 healthy adults in Busan, and isokinetic muscle strength measurement equipment was used to measure muscle strength during shoulder lateral rotation. The subjects performed lateral rotation of the shoulder in three different forearm postures (neutral, supine, prone) to measure shoulder muscle activity and lateral rotation strength. Results: The independent activity ratio (% Isolation) of the supraspinatus and infraspinatus muscles during lateral rotation of the shoulder joint demonstrated a significant difference (p<0.05) according to the change in forearm posture. Conclusion: The supraspinatus muscle showed independent activity ranging from highest to lowest in the order of pronation, neutral, and supination of the forearm, while the independent activity of the infraspinatus muscle ranged from highest to lowest in the order of neutral, supination, and pronation of the forearm. Therefore, the most active forearm positions for the supraspinatus and infraspinatus muscles are pronation and neutral, respectively.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.12-13
• /
• 2021

Methods for the manufacture, erection, and assembly of heavy frame modules were proposed. Interferences among precast members were prevented by using bolted metal plates for dry precast beam-to-column joints during assembly with a clearance for tolerance implementing grouted concrete filler plates instead of metal filler plates. Clearances for tolerances were provided to avoid conflictions among components during erection phases. These gaps were, then, grouted by high-strength mortar. The constructability of new connections of a beam-to-column joint using bolted metal plates for precast structures was examined using a full-scale assembly test in which practical observations indicated that members could be aligned and placed accurately in both horizontal and vertical directions, leading to a fast and convenient assembling. Bolt holes of the endplate were properly aligned using couplers with 30 mm fastened length embedded in the columns. The assembly test demonstrated the erection safety and structural stability of the proposed joints that were without filler plates when they were subjected to heavy loads at the time of their erection. The facile and rapid assembly of precast beam-to-column connections with a 30 mm tolerance was observed. The proposed assembly method is rapid, sustainable, and resilient, replacing the conventional methods of concrete frame construction, offering a connection that can be used in constructing infrastructure, such as buildings and pipe-rack frames.

• Journal of Fashion Business
• /
• v.27 no.5
• /
• pp.93-107
• /
• 2023

This study aimed to design a knee brace with dry electrode EMS (Electrical Muscle Stimulation) for elite badminton players suffering from knee pain and assess its effectiveness in relieving pain and improving mobility. The assessment measured knee joint range of motion (ROM), Sargent jump height, and pain perception using a visual analog scale (VAS). Four experimental groups were established: stability, pain induction after 100 squats, muscle soreness induction with a regular knee brace, and muscle soreness induction with the EMS knee brace. The most suitable knee brace was selected from four samples to design the EMS knee brace. The conductive fabric was integrated into the inner surface of the knee brace to enhance EMS conductivity for the quadriceps muscles. Tensile strength tests showed that the dry electrode did not significantly affect the physical functionality of the knee brace.Regarding knee joint ROM and Sargent jump height, the EMS knee brace outperformed muscle soreness induction with a regular knee brace and wearing a standard knee brace. VAS measurements demonstrated that the EMS braces effectively alleviated pain perception in most cases. The results indicate the potential for developing EMS braces to alleviate pain and prevent injuries for athletes across various sports.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.1
• /
• pp.77-86
• /
• 2024

In this study, an evaluation was conducted for a total of 16 conditions to suggest an appropriate construction method for the construction joint of polyurea waterproofing membrane coating. It was analyzed that the longer the construction time difference, the higher the rate of water leaks through joints, and it was confirmed that water leaks could be prevented through primer construction. In addition, since the surface of polyurea exposed outdoors for a long period of time is deteriorated and weakened, it was analyzed that polishing the area increases surface damage and affects the formation of the interface. During maintenance construction, it would be desirable to apply a primer before construction, and it is believed that using the same urea-based material will ensure waterproofing stability.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.3
• /
• pp.155-166
• /
• 2008

Research dam is consisted of concrete gravity dam that right bank department is built to concrete material, left bank department is composition dam that is consisted of rockfill dam that consist of rockfill material In domestic case, composition dam form of storage of water facilities of about 17,000 does not exist hardly in dam of irrigation water industry drinking water purpose that manage local government or other institution, Even if exist, is real condition that there is total nonexistence administrator fare of facilities, Choose unique dam of domestic multipurpose dam and analyzed conduct special quality of con'c gravity dam and rockfill dam joint part To analyze dynamic conduct special quality of composition dam by analytic method in this research, Do modelling via axis of dam and achieved static(Psuedo-static, modify Psuedo-static) and dynamic analysis, When achieving earthquake response analysis, analyzed seismic response analysis between concrete part and rockfill's part.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.6.1-6.6
• /
• 2020

Background: Various types of miniplates have been developed and used for the reduction of facial bone fractures. We introduced Yang's Keyhole (YK) plate, and reported on its short-term stability. The purpose of this study was to evaluate the long-term stability of the YK plate, as a follow-up study, by examining the patients who had used the YK plate among the patients with the reduction of mandible fractures and who visited for plate removal. Methods: We reviewed the medical records of 16 patients who underwent mandibular fracture fixation using a YK plate (group I) and 17 patients who underwent mandibular fracture fixation using a conventional plate (group II). Assessment was then made on malunion, occlusal stability, discomfort during the application, and clinical symptoms. Results: From January 2015 to December 2017, a total of 36 patients underwent mandibular fracture surgery using a YK plate. A total of 16 patients received plate removal. Among them, 15 were male and 1 female. The average age was 26 years. The applied surgical sites were the 12 on mandibular angle, 4 on mandibular symphysis, and 2 on subcondyle. The application period of YK plate was an average of 335 days. During the same period, 45 people underwent surgery on the conventional plate. A total of 17 patients received plate removal. Among them, 15 were male and 2 females. The average age was 36 years. The applied surgical sites were the 8 on mandibular angle, 4 on mandibular symphysis, and 2 on subcondyle. The application period of the conventional plate was an average of 349 days. No malocclusion occurred at the time of removal, and occlusion was stable. No patient complained of joint disease or discomfort. Conclusion: The YK plate system, in which the screw was first inserted and the plate was applied, for clinical convenience did not cause any particular problem and no significant difference from the conventional plate.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.1
• /
• pp.49-56
• /
• 2015

Objectives : The purpose of this study was to present quantitative data and basic references to decrease the accident risk of soccer instructors. Methods : To obtain data, we conducted an investigation on how H/Q ratio affects the dynamic stability of the lower extremity at the time of drop landing. The study targeted 13 soccer players from C University who have not had any injuries or wounds in the lower extremity joints and in any other parts of their bodies over the last 6 months. By using CMIS (USA), the players were divided into two groups according to H/Q ratios higher and lower than 69%, respectively. The subjects in each group were instructed to perform a drop landing. Results : The H/Q ratio did not affect the maximal flexion angle of the knee joints at the time of drop landing. In addition the dominant group with a relatively high H/Q ratio was observed to have increased time to reduce shock and to efficiently absorb the ground reaction force during drop landing. Also, the dominant group with a relatively high H/Q ratio utilized the strong performances of the antagonistic muscles around the hamstrings and the controlled rotatory powers of the thighs that were applied to the tibias supported by the ground. Finally, H/Q ratio, load factors, and mean and maximum EMG were significantly negatively related, whereas GRFx showed a positive relationship. In fact, these factors all affected the impact of the load from the H/Q ratio to the knee joints. Conclusion : From these findings it can be concluded that unbalanced H/Q ratio can be considered as a predictor of knee joint injury at the time of drop landing.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.244-248
• /
• 2000

It was investigated and analized on the construction and hull form for the ordinary fishing boat of south coast in Korea, and then analogized on the shipbuilding technology of fishing boat and fishing type around 1900 by B-spline form parameter method. The results obtained can be summarize as follows : (1) It was known that the boats used in this study have more narrow hull form than that of ancient fishing boats and their hull form was improved around 1900. (2) Keel was composed of bar keel with angle cross section. The stem corner have a material of bar stem and makes a sharp pointed stem. (3) Shell plate was jointed by the rabbetted clinker joint method. (4) It was investigated that anchovy drag net fishing boat has high L/B, L/D, B/D value as compared with drift gill net fishing boat. (5) Two boats have a good stability and particularly anchovy drag net fishing boat have a better stability value in comparison to the drift gill net fishing boat.