• 대한치과보철학회지
• /
• 제31권1호
• /
• pp.39-50
• /
• 1993

The purpose of this study was to investigate the association between characteristics of temporomandibular joint sound and possible contributing factors of temporomandibular joint sound. 1487 high school students (798 men and 689 women) aged from 16 to 18 were asked by questionnaires which was made for this study by T.M.J. clinic, dental infirmary, School of Dentistry, Chosun University, and data obtained from questionnaires were analyzed by chi-square test. The following results were obtained: 1. The prevalence of temporomandibular joint sound were found in 35.7% of all the subjects. 2. Temporomandibular joint sound could be unchanged, reduced and increased frequencey over time dependent on the individual. 3. The intensity of temporomandibular joint sound could be unchanged and increased during the chewing of hard food dependent on the individual. 4. The unilateral chewing and bruxism were not considered as possible contributing factors upon the occurring of temporomandibular joint sound. 5. Statistical significant association was found between clenching, stiffness, stress and tempore-mandibular joint sound, respectiely.(P<0.001, P<.01, P<0.05).

• Journal of Oral Medicine and Pain
• /
• 제19권2호
• /
• pp.193-203
• /
• 1994

The author performed this study for investigation of the magnitude of mandibular positional change caused by joint sound during mandibular opening and closing movement. There have been many studies stated mandibular border movement or other functional movement, and there also have been many studies reported clicking sound related to mandibular movement speed, trajectory and clinicl course of temporomandibular disorders(TMDs), but there have not been so many studies stated spatial mandibular position accompanied by joint sound. For this study 46 TM joint from the patients with TMDs were used and they were compared by character and occuring phase of the joint sound. Synchronized data which were amplitude and frequency of joint sound and amount of mandibular positional change were collected through sonopak and BioEGN rotate of Biopak system, respectively. Mandibular position was analyzed for translational and rotational movement change between before and after joint sound. The obtained data were processed with SAS program and summary of this paper were as follows : 1. Mean value of the amount of translational movement in whole joints were 6.0mm in vertical direction, 3.3mm in anteroposterior direction and 0.8mm in lateral direction between before and after joint sound. 2. Mean value of the amount of translational movement in clicking joinnts showed slightly increased tendency than in popping joints. 3. The amount of mandibular change in translational movement during closing phase were more than during opening phase. 4. The amount of mandibular rotational change in whole joints were $1.1^{\circ}$, 1.0mm in frontal plane and $0.9^{\circ}$, and 0.8mm in horizontal plane. 5. The amount of rotational movement were more in clicking joints than in popping joints and were more during closing phase than during opening phase, but statistically significance were showed only in frontal plane.

• 대한치과보철학회지
• /
• 제31권1호
• /
• pp.51-61
• /
• 1993

The purpose of this study was to evaluate a possible occlusal contributing factor on the pathogenesis of temporomandibular joint sound by a new computer aided method for analysis of occlusal contact. 20 subjects without temporomandibular joint sound as control group and 20 subjects with temporomandibular joint sound as experimental group in the TMJ clinic, dental infirmary, School of Dentistry, Chosun University were selected so as to investigate the distribution and intensity of the bilateral occlusal contacts on silicone rubber bites in habitual intercusal position through a computer aided system. The following results were obtained : 1. The distribution and intensity of the occlusal contact could be analyzed and expressed as color density value per levels by this computer aided method. 2. There was not statistical significance between control and experimental group in total occlusal contacts. 3. There was statistical significance between control and experimental group In the total difference of right and left occlusal contacts.(P<0.05).

• The Journal of Advanced Prosthodontics
• /
• 제1권1호
• /
• pp.26-30
• /
• 2009

STATEMENT OF PROBLEM. Qualitative and semi-quantitative methods have been developed for TMJ sound classification, but the criteria presented are completely inhomogeneous. Thus, to develop more objective criteria for defining TMJ sounds, electroacoustical systems have been developed. We used Joint vibration analysis in the BioPAK system(Bioresearch Inc., Milwaukee, USA) as the electrovibratography. PURPOSE. The aim of this study was to examine the TMJ sounds with repect to frequency spectra patterns and the integral > 300 Hz /< 300 Hz ratios via six-months follow-up. MATERIAL AND METHODS. This study was done before and after the six-months recordings with 20 dental school students showed anterior disk displacement with reduction. Joint vibrations were analyzed using a mathematical technique known as the Fast Fourier Transform. RESULTS. In this study Group I and Group II showed varied integral > 300 /< 300 ratios before and after the six-months recordings. Also, by the comparative study between the integral > 300 /< 300 ratios and the frequency spectrums, it was conceivable that the frequency spectrums showed similar patterns at the same location that the joint sound occurred before and after the six-months recordings. while the frequency spectrums showed varied patterns at the different locations that the joint sound occurred before and after six-month recordings, it would possibly be due to the differences in the degree of internal derangement and/or in the shape of the disc. CONCLUSIONS. It is suggested that clinicians consider the integral > 300 /< 300 ratios as well as the frequency spectrums to decide the starting-point of the treatment for TMJ sounds.

• International Journal of Concrete Structures and Materials
• /
• 제5권1호
• /
• pp.11-18
• /
• 2011

Carbonation in RC (reinforced concrete) structure is considered as one of the most critical deteriorations in urban cities. Although RC column has one mix condition, carbonation depth is measured spatially differently due to its various environmental and internal conditions such as sound, cracked, and joint concrete. In this paper, field investigation was performed for 27 RC columns subjected to carbonation for eighteen years. Through this investigation, carbonation distribution in sound, cracked, and joint concrete were derived with crack mappings. Considering each related area and calculated PDF (probability of durability failure) of sound, cracked, and joint concrete through Monte Carlo Simulation (MCS), repairing timings for RC columns are derived based on several IPDF (intended probability of durability failure) of 1, 3, and 5%. The technique of equivalent probability including carbonation behaviors which are obtained from different conditions can provide the reasonable repairing strategy and the priority order for repairing in a given traffic service area.

• Journal of the Korean Wood Science and Technology
• /
• 제51권5호
• /
• pp.419-430
• /
• 2023

In this study, the floor impact sound insulation performance of Korean domestic Cross-Laminated Timber (CLT) slabs was evaluated according to their joint types, species and thicknesses in laboratory experiments. The sound insulation performance of the CLT has not been investigated before, thus, this study was conducted to quantify basic data on floor impact sound insulation performance of CLT slabs. 5-ply and 150 mm thick CLT panels made of 2 species, Larix kaempferi and Pinus densiflora, were used for the study. The CLT panels were assembled by 3 types of inter-panel joints to form floor slabs: spline, butt and half-lap. And the 150 mm thick Larix CLT slabs were stacked to the thicknesses of 300 mm and 450 mm. The heavy-weight floor impact sound insulation performance of the 150 mm CLT slabs were evaluated to be 70 dB for the Larix slabs and 71.6 dB for the Pinus slabs, and the light-weight floor impact sound insulation performance, 78.3 dB and 79.6 dB, respectively. No significant difference in the sound insulation performance was found between the slabs of the 2 species or among the 3 types of joints. The reduction of 1 dB in the heavy-weight floor impact sound and 1.6 dB in the light-weight floor impact sound per 30 mm increase in thickness were confirmed through the experiments. This study can be viewed as the basic research for the evaluation of floor impact sound insulation performance of CLT.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.719-724
• /
• 2013

In the case of newly developed stud which has more performance of sound transmission loss, it is expected that sound would transmit through runner than stud. so we developed construction method of runner and stud. As a result, sound transmission loss is improved about 2 dB by using this method. But this construction method could be applied to only newly developed stud. In addition, sound leak of wall joint is about 2 dB, and it could be improved by using rubber gasket at joint.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.307-309
• /
• 2004

In this study, we have evaluated and classified arthritic pathology using the auscultation of knee joint sound. Six normal persons and 11 patients with knee problem were enrolled. Six patients of Group 1 needed an orthopeadic surgery because of the ruptured wounds of meniscus or ACL(Anterior Cruciate Ligament) and 5 patients of Group 2 diagnosed as osteoarthritis. Subjects were taken knee flexion and extension being seated in a chair for 20 seconds which repeated 3 times. Also subjects stood up and sit down repeatedly in the same way. After the movement of knee was divided into 18 degrees, the pitch perturbation according to partial degrees was analyzed and the DTW(Dynamic Time Warping) method was applied for normalizing a time-axis and unpaired t-test was used for statistic results among groups. As a result, the amplitude and frequency perturbations of group 2 was higher than group 1(p<0.05) and showed a characteristic 'w-shape' in angle-amplitude graph. These results suggest that the analysis of knee joint sound might assist in early diagnosis of knee joint disease.

• 구강회복응용과학지
• /
• 제17권4호
• /
• pp.217-224
• /
• 2001

A prevalence of temporomandibular disorders(TMD) based on the clinical sign and symptom in 155 patients were investigated. History taking with interview chart and clinical examination were performed. Age and gender of the patients, duration of TMD, location of pain, joint sound, limitation of mouth opening and more detailed diagnostic name were identified. The results of this study were as follows: 1. TMD was more prevalent in female than in male. TMD was the most prevalent at the age of 20s and decreased with age. 2. Acute TMD was more prevalent than chronic one. 3. About ninety percent of TMD patients had pain. Pain had mainly a unilateral origin. Muscle pain was mainly related with the masseter muscle. 4. Joint sound was identified in about fifty-six percent of the TMD patients and unilateral joint sound was more prevalent than bilateral one. 5. Limitation of mouth opening was observed in about forty percent of the TMD patients. 6. In TMD patients, muscle dysfunction was the most prevalent one. In muscle disorders local muscle soreness was the most prevalent one. In joint disorders, capsulitis was the most prevalent one. In muscle-joint disorders, trigger point pain with retrodiscitis was the most prevalent one.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.51-53
• /
• 2005

Considerable noise is sometimes associated with degeneration of the hee joint surface. Such noise may indicate roughness or softening of the cartilage surfaces, and may be a useful index for early disease. In this study, we have evaluated arthritic pathology using the acoustical analysis of knee joint sounds. During sitting and standing periods, subjects' active knee flexion and extension were monitored. Fundamental frequency, mean amplitude of pitch, jitter and shimmer were analyzed according to the position and the joint angle. The result showed that the fundamental frequency of the 2nd patient group and standing position was higher than the others, and that the pitch of sounds changed unstably. These results suggest that an analysis of knee joint sound might assist non-invasive diagnosis of an articular pathology.