• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.953-958
• /
• 2002

The finishing method of concrete floor using automatic surface finisher is one of new technologies in concrete floor construction. The development of high technologies in construction will increase in order to satisfy the demand to construct high quality building. Using this method, it is possible to increase the quality of building as well as to reduce the labor work in site. In this paper, a system which can be used to finish the concrete floor using automatic surface finisher, is presented and its structural capacities are evaluated. The system is composed of rail which guides the surface vibrator and absorbs the volume change of concrete, and a device supporting the rail. From the experimental work for these devices, it was shown that the support and rail had suitable strength to resist the automatic surface finisher. For design purpose, also, effective span of supports was tabulated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1067-1070
• /
• 1995

In this paper, we have treated the modeling and development of three degree of freedom parallel manipulator for micromotion based on the Stewart platform type parallel structure. the kinematic modeling was derived from the relation between base coordinate and platform anr the dynamic modeling was from the method of Kinematic Influence Coefficients(KIC) and transferring of the generalized coordinates. Using this method, we presented the method to choose the actuator and joint by investigating the actuating forces needed when the manipulator moves along the given trajectory. In the end, the prototype manipulator was developmented and evaluated.

• Journal of Korean Library and Information Science Society
• /
• v.14
• /
• pp.149-179
• /
• 1987

The concept of a "switching language " between different indexing languages and information retrieval systems has been discussed since the mid-1960s. Some preliminary investigates into the feasibility of switching between mediating tool yielded positive results. The Broad system of ordering(BSO) , a general classification scheme for information exchange and switching, has been under development as a joint FID/UNESCO project since 1973. The purpose of this study is to find out the origin, development, definition, and principle of BSO. The results of the study can be summarized as follows: (1) BSO is a switching language for the purpose of interconnection of information system which is located different regions, or using different indexing languages. (2) BSO is in effect, fully faceted and broad classification system. (3) BSO is not only a subject code but also an ordering system. (4) BSO can be used information retrieval system because the notation of composite subjects is formed by combining notation. (5) BSO has to some extent sacrificed brevity by leaving large unused notational gap for future use. (6) The structure of the scheme is in no way dependent upon the notation. notation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.113-118
• /
• 1993

This paper represents mechanical compliance & ZMP(Zero Moment Point) control algorithm for IWR(Inha Walking Robot) system. In case of walking in different environments, a biped walking robot must vary its gait(walking period or step length, etc.) according to the environments. However, most of biped walking robots do not have the capability to change their gaits or need more complex control algorithm, because ZMP cannot be defined in their control algorithm. Therefore new linear type with balancing joint is proposed which is used as an aid in balancing & ZMP control itself. In IWR system, ZMP can be defined by solving differential equations and it does not need to be predefined ZMP trajectory. Furthermore we can input the desired ZMP position. In parallel with the development, we also considered a mechanical compliance for reducing the inverse kinematics, dynamics and the control complexity. It will figure out some powerful adaptation with 3D irregular terrains.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.95-97
• /
• 2011

The purpose of this study is to suggest the development direction and performance analysis of design review system in design-build project. As a result of surveys, the fairness and transparency of design review system was abruptly increased. But local government has not fairness and transparency. Therefore this research has proposed the integration management and joint application of design review organization in design-build project. So, we expect that the transparency is raised in management of design review committee.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.205-206
• /
• 2008

We propose load balancing algorithm based on cross layer designing for MIMO OFDM system. When there are many users using data service, base station(BS) should distribute traffic. Moreover, cross layer design gives benefit managing radio resource and network bandwidth management. Proposed cross layer load balancing technique manages both BS's bandwidth allocation and MS’s power control. One BS request bandwidth to other BSes and other BSes reduce each bandwidth. And BSes reduce power of sub carriers for reserving available bandwidth of backhaul. MSes that didn't get service can be served by obtaining bandwidth from other BSes. The simulation result shows more users can be served and cell throughput was increased

• Journal of National Security and Military Science
• /
• s.9
• /
• pp.141-190
• /
• 2011

Defense industry as 'a new dynamics of economic growth' policy implies driving policy of defense products' export. The purpose of this study is to suggest suitable strategies to meet with such policy in terms of region and individual nation. The strategies towards advanced region are joint sale strategy for the third countries, extension strategy of trade-off and development strategy of products to exploit niche markets. The strategies towards non-advanced regions are package strategy including exchange of economic development know-how, strengthening strategy of relationships to leading groups in national decision-making processes, exploit strategy of sales market through transfer discard and surplus equipments to other nations, government to government sale strategy towards countries holding low leveled equipment maintaining and management abilities. Finally, successive strategies require leaders' will, active sales diplomacy and active international cooperations of defense industry.

• Journal of the Korean Society of Costume
• /
• v.24
• /
• pp.235-251
• /
• 1995

The purpose of this study is to analyze the charateristics of foot according to foot type and analyze the change of foot shape by movements for the sake of making a comfort-able footwears. On the 6 foot type classified by F.I. and F. P. A, this study analyze the surface areas and circumference in the surface area development figure. There are selected eighteen college girls and four movements. The results are as followes : 1. In the 6 foot types classified by F.I. and F. P. A., the circumferences were differed sig-nificantly. 2. In the 6 foot types classified by F.I. and F. P. A., the surface areas were not differed siginificantly. 3. By movements, circumferences and surfaces were not significantly changed according foot type. 4. By movements, the circumference IV, V were changed variously. 5. By movements, surface area of toes, M.P. joint and ankle were changed variously.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.9-18
• /
• 1998

The components with J-lead. which are more integrated and smaller than ones with Gull-wing. are rapidly being used in electronic board such as the PCB, for they have the advantage of occupying a small space compared to the other components. However, the development of inspection system for these new components is not so rapid as component development. Component-inspection with J-lead using vision system is difficult because they are hidden from camera optical axis. X-ray inspection, which has the advantage of inspecting the inside of solder state, is used to J-lead inspection. However. it is high cost and dangerous by leaking out X-ray compared to vision system. Therefore, in this paper, we design vision system suited to J-lead inspection and then propose algorithm which have flexibility in mount and rand error.

• The Journal of Korean Physical Therapy
• /
• v.13 no.3
• /
• pp.751-760
• /
• 2001

Therapeutic exercise had developed with human being. It depend upon development of physiology, anatomy, kinesiology and biomechanics. There are two categories in therapeutic exorcise. One is classical therapeutic exercise which is a activity of one muscle group, one axis and one plane motion. It is ROM, FRE. osteokinematics, arthrokinematics. Another is neurophysiological approach which is multi muscle group, multi axis and plane exercise. It is PNF and Bobath that start from 1940 to early 1950. Classical therapeutic exorcise develop from ROM to osteokinematics and arthrokinematics. It is foundation of the joint mobilization and orthopaedic manual physical therapy. Neurophysiological therapeutic approaching has more theory and skills than before. Bobath methods had changed from reflex-inhibiting posture to key points of control and added the theory of musculoskeletal, biomechanics, motor behaviour and cognition. We call it motor control.