• Journal of Power System Engineering
• /
• v.21 no.1
• /
• pp.57-62
• /
• 2017

The flexible joint with bellows and flange is made by welding bellows and flange in general. The welded parts cause a crack or demage in the flexible joint due to continuous vibration and fatigue limit. This paper is concerned with development of flexible joint with non-welded, free rotation of flange and non-packing to improve fatigue failure condition between bellows and flange. The support box and support plate that are components of press part are designed to compress fore-end of bellows only without demage of bellows. The production system of flexible joint is designed with piston attached on the compression side. The simulation is performed using Deform 3D software. As the result of simulation, the shape of compressed bellows was most proper in the compression power of $157kg{\cdot}f$ and any deformation has not occurred at a part besides fore-end. The result show that the production possibility of the designed flexible joint.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.1
• /
• pp.44-52
• /
• 1999

The purpose of this study was to investigate the distribution of CGRP immunoreactive nerve fibers in rat squamosomandibular joint with postnatal development. Squamosomandibular joint with adjacent tissue of 8 groups of rats(1, 5, 10, 15, 20, 25, 35-postnatal day and adult groups) were removed on bloc and processed for immunohistochemistry and were subjected to light microscopic examination. The results obtained were as follows; 1. The anterior portion of the articular disk was most densely innervated, followed by the posterior, lateral, and medial portions in each group. 2. Increase of CGRP immunoreactive nerve fibers was evident in 10, 15, 20 postnatal day groups. 3. Almost no CGRP immunoreactive nerve fibers were observed in articular surface of disk proper, mandibular fossa and condyle head of each group. These result suggest that CGRP immunoreactive nerve fibers increased in synovial membrane and peripheral portion of articular disk during 10-20 postnatal day may play a important role in squamosomandibular joint function after weaning period.

• Steel and Composite Structures
• /
• v.1 no.3
• /
• pp.295-312
• /
• 2001

The purpose of this paper is to propose a new type of steel reinforced concrete (SRC) beam-column joints and to examine the structural performance of the proposed joints, which simplify the construction procedure of steel fabrication, welding works, concrete casting and joint strengthening. In the proposed beam-column joints, the steel element of columns forms continuously built-in crossing of H-sections (${\Box}$), with adjacent flanges of column being connected by horizontal stiffeners in a joint at the level of the beam flanges. In addition, simplified lateral reinforcement (${\Box}$) is adopted in a joint to confine the longitudinal reinforcing bars in columns. Experimental and analytical studies have been carried out to estimate the structural performance of the proposed joints. Twelve cruciform specimens and seven SRC beam-column subassemblage specimens were prepared and tested. The following can be concluded from this study: (1) SRC subassemblages with the proposed beam-column joints show adequate seismic performances which are superior to the demand of the current code; (2) The yield and ultimate strength capacities of the beam-to-column connections can be estimated by analysis based on the yield line theory; (3) The skeleton curves and the ultimate shear capacities of the beam-column joint panel are predicted with a fair degree of accuracy by considering a simple stress transfer mechanism.

• Biomedical Science Letters
• /
• v.29 no.4
• /
• pp.220-230
• /
• 2023

Identification of the pathogens causing infection is important in terms of patient's health management and infection control. Synovial fluids could be used as clinical samples to detect causative pathogens of prosthetic joint infections (PJIs) using molecular diagnostic assays, therefore, normalization and validation of clinical samples are necessary. Microbial culture is considered the gold standard for all infections, including PJIs. Recently, molecular diagnostic methods have been developed to overcome the limitation of microbial culture. Therefore, guideline for validating clinical samples to provide reliable results of molecular diagnostic assays for infectious diseases is required in clinical field. The present study aimed to develop an accurate validating method of synovial fluid clinical samples using GAPDH gene as an internal control to perform the quantitative PCR TaqMan probe assay to detect pathogens causing PJIs.

• The Journal of Engineering Geology
• /
• v.19 no.2
• /
• pp.145-152
• /
• 2009

Joints are planar tensile opening-mode fractures whose relative motion, as the fracture propagates, is perpendicular to bedding plane and occur in a systematic manner to form a joint set. This paper discusses the mechanical control of joint propagation, the relationship between join spacing and layer thickness, the join saturation, the frequency distribution of join spacing, the joint density, the cross joint, and the development mechanism of joint from a lot of recent joint studies in sedimentary rocks.

• Korean Journal of Child Studies
• /
• v.30 no.5
• /
• pp.155-165
• /
• 2009

This study was conducted to identify relationships between toddler-teacher joint attention and toddlers' vocabularies. Toddlers' vocabularies were assessed by the MacArthur Communicative Development Inventory-Korean (MCDI-K) modified by Kim (2006); joint attention episodes were observed by classification categories for engagement condition (Bakeman & Adamson, 1984). Data were analyzed by means, t-test and Pearson's correlations. Results were that : (1) receptive vocabulary of toddlers was about 1.1 times as high as their expressive vocabulary. (2) Coordinated joint attention was observed most frequently, followed by supported joint attention; coordinated joint attention was closely related to support joint attention. (3) The relationship between toddler-teacher joint attention and toddlers' vocabularies were significant in a positive direction.

• Journal of Biosystems Engineering
• /
• v.25 no.5
• /
• pp.399-408
• /
• 2000

This study is final focused on developing fruit harvesting robot can distinguish fruit type and status accurately. Multi-joint robot is able to discriminate tree shape and select mature fruit by image processing. The multi-joint robot consists of (a) rotating base, (b)turning first joint-arm, (c)rotating and turning second joint-arm, (d)rotating and turning third joint-arm, (e)rotating and turning last joint and (f)picker hand. The operational ranges of the robot are: horizontal 860~2,220mm, vertical 1,440~2,260mm, 270 degrees’rotation angle, 90 or 270 degrees’turning angle. The robot weighs 330kg. The multi-joint robot was designed in high accuracy and efficiency by getting as close as the movements of human arms and waist.

• Structural Engineering and Mechanics
• /
• v.82 no.6
• /
• pp.801-812
• /
• 2022

To better promote the development of fabricated buildings, this paper studies the seismic behavior of precast concrete beam-column bolted joint under vertical low cyclic loading. The experimental results show that cracks appear in the beam-column joint core area. Meanwhile, the concrete and the grade 5.6 bolts are damaged and deformed, respectively. Specifically, the overall structure of the beam-column joint remains intact, and the bolts have good energy dissipation capacity. Based on the experimental study, a new method of beam-column bolted connection is proposed in simulation analysis. The simulation results show that the bolts deform in the core area of the new beam-column joint, which enhances the concrete shear capacity legitimately and protects the T-end of the beam against shear failure. To summarize, both the experimental joint and the simulated joint prolong the service life by replacing the bolts under the seismic loading. The research results provide a reference for applications of the fabricated beam-column joint.

• Journal of Distribution Science
• /
• v.14 no.6
• /
• pp.107-118
• /
• 2016

Purpose - Over 90% of Domestic logistics industry is small enterprise and they are experiencing growth stagnation due to price-based competition structure rather than constructing logistics service of high added value. In order to get over this situation and pursue the development of logistics industry, strengthening its competitiveness, through inter-enterprise cooperative network build-up, would be a key alternative. Therefore, in this study, an index for measuring inter-enterprise cooperation level of Joint logistics business will be developed as a typical collaborative business model in logistics industry. Moreover, a strengthening competitiveness method suggests a developmental step and a key management index to mature in logistics industry. Research Design, Data, Methodology - This study is an index development research for measuring inter-enterprise cooperation level of logistics industry. Such a level was measured by performing a survey by targeting enterprises that participated in Joint logistics business. The targeting enterprises are typical cooperative models in logistics industry. Measurement items were developed which were based on the presented items in existing research. Question items were composed of selection type questions as answering Yes/No. They measures implementation status of corporate activity and detailed activity items measuring qualitative level. Total samples were based on 116 enterprise samples including 90 logistics enterprises and 26 shippers. In addition, by evaluating the importance for Joint logistics business recognition with personnel working level, the weight of measuring variable was extracted. This study has built an assessment tools (LPCI) on Joint logistics business cooperation level in a situation where there are no previous studies on joint logistics business, this study is meaningful for other studies. Results - As a result of analyzing LPCI presented in this study, the score of logistics enterprise was represented as 59.9 points based on full score of 100 points and that of shippers as 47.2 points and cooperation level among enterprises participated in Joint logistics business was revealed to be very low. In particular, as a result of measuring the importance between logistics enterprise and shippers, the difference by each measurement standard was represented among those enterprises. This difference is considered to be a key factor that cooperative operational conformity between logistics enterprises and shippers is represented to be low. Conclusions - As most joint logistics business, being promoted at present, is sharing facility and information with joint logistics business, it is hard to find such a joint logistics business in reality based on cooperative business model in main cooperation agents. Therefore, competitiveness of logistics industry could be strengthened by promoting joint logistics business based on their mutual cooperation among enterprises. In other words, it is to secure sustainable competitiveness of joint logistics business together with creation of new market by inter-enterprise cooperation based on integration of basic logistics business.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.2
• /
• pp.98-107
• /
• 2019

The defense system development process is a process of developing various systems that perform functions in various functional areas such as battlefield awareness, command control, force application, and logistical support. In other words, the defense system development process is a process of developing many systems simultaneously in various functional areas. Various systems developed through this process should be interoperable so that they can be integrated and operated in a joint warfighting environment. To successfully implement this, the US Department of Defense uses the Joint Capability Integrated Development System(JCIDS) for the defense system development, and within this JCIDS processes the Capability Based Assessment(CBA) methodology as its core technology. This CBA methodology transforms the mission activity requirements to functional capability requirements logically and transforms the functional capability requirements to system requirements logically also. Smart City is a city that improves the convenience and quality of life of the citizen by integrates various systems that perform various functions of the city and smarties various functional systems with smart services by using IT technology. In other words, defense system development and smart city development have a common feature of the process of developing many systems simultaneously in various functional areas. In order to address the problem of having to develop many systems simultaneously in each functional area, it is important to logically transform the various mission scenarios into functions and logically transform the functions into systems. Therefore, a joint capability integrated development system and its core methodology, Capability Based Assessment(CBA), can be applied to smart city development. This paper proposes a method for performing a smart city concept design method using the capability based evaluation (CBA) method.