• Fashion & Textile Research Journal
• /
• v.22 no.2
• /
• pp.222-232
• /
• 2020

This study analyzes changes in the knees, hips, and hip joint length according to the different angles of bending knees by 45°, 90°, and 135° respectively for knees, hips, and the hip joint that have high fracture rates when falling down. The research subjects were 10 elderly women in their 60s (or older) that obtain data collected through direct measurement. For analysis, the study drew a diagram of elongation and shrinkage based on changes and change rate from a straight posture (0°) and conducted a statistical analysis on differences of body surface length by zone according to movements. The more the knees were bent, the vertical surface length in front of the knees, the horizontal surface length above the knee line, the horizontal body surface length below the knee lines on the back, and the vertical surface lengths between front side lines and the side lines increased; however, the vertical surface length on the back decreased. For the hip joint, the difference in the vertical surface length was more distinctive when compared to the horizontal. Finally, the horizontal surface length increased below the hips and the vertical surface length increased in most areas except the sidelines and the front. The result of the change in body surface length according to the movements of this study can be utilized in the development of the motion-variable protector.

• Journal of Welding and Joining
• /
• v.33 no.1
• /
• pp.35-40
• /
• 2015

Recently, there have been the increase of ship size and the development of oil and gas in arctic region. These trends have led to the requirements such as high strength, good toughness at low temperature and good weldability for prevent of brittle fracture at service temperature. There has been the key issue of crack arrestability in large size structure such as container ship. In this report for the first time, crack arrest toughness of thick steel plate welds was evaluated by large scale ESSO test for estimate of brittle crack arrestability in thick steel plate. For large structures using thick steel plates, fracture toughness of welded joint is an important factor to obtain structural integrity. In general, there are two kinds of design concepts based on fracture toughness: crack initiation and crack arrest. So far, when steel structures such as buildings, bridges and ships were manufactured using thick steel plates (max. 80~100mm in thickness), they had to be designed in order to avoid crack initiation, especially in welded joint. However, crack arrest design has been considered as a second line of defense and applied to limited industries like pipelines and nuclear power plants. Although welded joint is the weakest part to brittle fracture, there are few results to investigate crack arrest toughness of welded joint. In this study, brittle crack arrest designs were developed for hatch side coaming of large container ships using arrest weld, hole, and insert technology.

• Korean Journal of Materials Research
• /
• v.18 no.1
• /
• pp.38-44
• /
• 2008

The micro-structural changes, strength characteristics, and micro-fractural behaviors at the joint interface between a Sn-4.0wt%Ag-0.5wt%Cu solder ball and UBM treated by isothermal aging are reported. From the reflow process for the joint interface, a small amount of intermetallic compound was formed. With an increase in the isothermal aging time, the type and amount of the intermetallic compound changed. The interface without an isothermal treatment showed a ductile fracture. However, with an increase in the aging time, a brittle fracture occurred on the interface due mainly to the increase in the size of the intermetallic compounds and voids. As a result, a drastic degradation in the shear strength was observed. From a microshear test by a scanning electron microscope, the generation of micro-cracks was initiated from the voids at the joint interface. They propagated along the same interface, resulting in coalescence with neighboring cracks into larger cracks. With an increase in the aging time, the generation of the micro-structural cracks was enhanced and the degree of propagation also accelerated.

• Earthquakes and Structures
• /
• v.17 no.4
• /
• pp.411-424
• /
• 2019

In this study, a numerical model of a shield tunnel with an assembled segmental lining was built. The seismic response of the segmental lining of the section of the shield tunnel in Line 1 of the Chengdu Metro is analyzed as it passes through the interface of sand-cobble and mudstone layers. To do so, the node-stress seismic-motion input method was used to input the seismic motion measured during the 2008 Wenchuan earthquake, and the joint openings and dislocations associated with the earthquake action were obtained. With reference to the Ethylene-Propylene-Diene Monomer (EPDM) sealing gaskets used in the shield tunnels in the Chengdu Metro, numerical simulation was applied to analyze the contact pressure along the seepage paths and the waterproof property under different joint openings and dislocations. A laboratory test on the elastic sealing gasket was also conducted to study its waterproof property. The test results accord well with the numerical results and the occurrence of water seepage in the section of the shield tunnel in Line 1 of the Chengdu Metro during the 2008 Wenchuan earthquake was verified. These research results demonstrate the deformation of segmental joint under earthquake, also demonstrate the relationship between segmental joint deformation and waterproof property.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.4
• /
• pp.414-420
• /
• 2022

Objective: In this study, the test-retest reliability and validity were presented to evaluate the usability of isokinetic rehabilitation equipment for the knee joint. Design: Cross-sectional design, reliability & validity study. Methods: Thirty healthy adults participated in the study. A CSMI dynamometer was used as a standardized measuring device to present the validity of the equipment. It was measured based on the dominant leg. The average peak torque value was selected as the measurement variable. After the measurement, a questionnaire was conducted on safety, satisfaction, and performance through the usability evaluation questionnaire. Results: The knee joint isokinetic rehabilitation equipment showed high reliability with Intraclass Correlations Coefficients (ICC) =0.883~0.956. In order to check the validity of the equipment, the 95% confidence interval of the mean difference limit was confirmed by the Bland & Altman plot. As a result, all three angular velocities showed a smaller confidence interval in the flexion than in extension. There were less than 10 plots that were not included in 2 Standard Deviation (SD) between all measurements. As a result of the usability evaluation questionnaire, the average of the safety domain(4.9±0.4), satisfaction domain(4.1±0.8), performance domain(4.3±0.8). Conclusions: If the product is improved by supplementing the items identified in the usability evaluation process, it is judged that it can be used as a useful device in various knee joint rehabilitation fields.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.2
• /
• pp.94-115
• /
• 2017

'Arirang folk song in the Democratic People's Republic of Korea' was inscribed to the Representative List of the Intangible Cultural Heritage of Humanity in 2014 and 'Tradition of kimchi-making in the Democratic People's Republic of Korea' followed in 2015. It is presumed that North Korea was influenced by the Republic of Korea inscribing 'Arirang, lyrical folk song in the Republic of Korea' to the list in 2012 as well as 'Kimjang, making and sharing kimchi in the Republic of Korea' in 2013. These cases show the necessity (or possibility) of cultural exchanges between the two Koreas through UNESCO ICH lists. The purpose of this article is to explore the possibility of inter-Korean cultural integration. Therefore, I would like to review UNESCO's ICH policy and examine the ways of cooperation and joint nominations to the Representative List of Intangible Cultural Heritage of Humanity between the two Koreas. First, I reviewed the amendments to the laws and regulations of the two Koreas and how the two countries applied the UNESCO Convention for the Safeguarding of the Intangible Cultural Heritage. Although the cultural exchange is a non-political field, given the situation between South and North Korea, it is influenced by politics. Therefore, we devised a stepwise development plan, divided into four phases: infrastructure development, cooperation and promotion, diversification, and policymaking and alternative development. First a target group will be needed. In this regard, joint nominations to the Representative List of the UNESCO Intangible Cultural Heritage of Humanity will be suitable for cooperation. Both countries have already started separate nominations on shared ICH elements to the UNESCO lists. Therefore, I have selected a few elements as examples that can be considered for joint nominations. The selected items are makgeolli (traditional liquor), jang (traditional soybean sauce), gayangju (homebrewed liquor), gudeul (Korean floor heating system), and jasu (traditional embroidery). Cooperation should start with sharing information on ICH elements. A pilot project for joint nomination can be implemented and then a mid-term plan can be established for future implementation. When shared ICH elements are inscribed on UNESCO ICH lists, various activities can be considered as follow-ups, such as institution visits, performances, exhibitions, and joint monitoring of the intangible cultural heritage. Mutual cooperation of the two Koreas' intangible cultural heritage will be a unique example between the divided countries, so its value will be recognized as a symbol of cultural cooperation. In addition, it will be a foundation for cultural integration of the two Koreas, and it will show the value of their unique ICH to the world. At the same time, it will become a good example for joint nominations to the Representative List recommended by UNESCO.

• Animal Bioscience
• /
• v.37 no.11
• /
• pp.1848-1862
• /
• 2024

Objective: Asparagine synthetase (ASNS) is an aminotransferase responsible for the biosynthesis of aspartate by using aspartic acid and glutamine. ASNS is highly expressed in fast-growing broilers, but few studies have reported the regulatory role of ASNS in muscle development. Methods: To explore the function of ASNS in chicken muscle development, the expression of ASNS in different chicken breeds and tissues were first performed by real-time quantitative reverse transcription polymerase chain reaction (RT-PCR). Then, using real-time quantitative RT-PCR, western blot, EdU assay, cell cycle assay and immunofluorescence, the effects of ASNS on the proliferation and differentiation of chicken skeletal muscle satellite cell (SMSC) were investigated. Finally, potential mechanisms by which ASNS influences chicken muscle fiber differentiation were identified through RNA-Seq. Results: The mRNA expression pattern of ASNS in muscles mirrors trends in muscle fiber cross-sectional area, average daily weight gain, and muscle weight across different breeds. ASNS knockdown inhibited SMSC proliferation, while overexpression showed the opposite. Moreover, ASNS attenuated SMSC differentiation by activating the adenosine 5'-monophosphate (AMP)-activated protein kinase (AMPK) pathway. Additionally, 5-aminoimidazole-4-carboxamide1-β-D-ribofuranoside (AICAR) treatment suppressed the cell differentiation induced by siRNA-ASNS. RNA-Seq identified 1,968 differentially expressed genes (DEGs) during chicken SMSC differentiation when overexpression ASNS. Gene ontology (GO) enrichment analysis revealed that these DEGs primarily participated in 8 biological processes, 8 cellular components, and 4 molecular functions. Kyoto encyclopedia of genes and genomes (KEGG) pathway analysis identified several significantly enriched signaling pathways, such as the JAK-STAT signaling pathway, tumor necrosis factor signaling pathway, toll-like receptor signaling pathway, and PI3K-Akt signaling pathway. Conclusion: ASNS promotes proliferation while inhibits the differentiation of chicken SMSCs. This study provides a theoretical basis for studying the role of ASNS in muscle development.

• Tunnel and Underground Space
• /
• v.13 no.1
• /
• pp.33-43
• /
• 2003

Field investigations of the orientations of discontinuity planes inside the borehole for designing the underground rock structures have been depend solely on the borehole image-taking techniques. But, borehole image-taking has to be processed after the completion of drilling operation and also requires the handling of highly expensive apparatus so that practical application is very restricted. In this study Discontinuity Orientation Measurement (DOM) drilling system and discontinuity analysis model RoSA-DOM are developed to acquire the reliable information of rock structure by analyzing the characteristics of joint distribution. DOM drilling system retrieves the rock core on which the reference line of pre-fixed drilling orientation is engraved. Coordinates of three arbitrary points on the joint surface relative to the position of reference line are assessed to determine the orientation of joint plane. The position of joint plane is also allocated by calculating the location of core axis at which joint plane is intersected. Then, the formation of joint set is analyzed by utilizing the clustering algorithm. Total and set spacings are calculated by considering the borehole axis as the scanline. Engineering applicability of in-situ rock mass around the borehole is also estimated by calculating the total and regional RQDs along the borehole axis.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.2
• /
• pp.153-165
• /
• 2013

The established gait analysis studies have regarded leg as one single spring. If we can design a knee-ankle actuating mechanism as a primary actuator for supporting knee extension, it might be possible to revolutionary store or release elastic strain energy, which is consumed during the gait cycle, and as a result leg stiffness is expected to increase. An ankle joint actuating mechanism that stores and releases the energy in ankle joint is expected to support and solve excessive artificial leg stiffness caused by the knee actuator (primary actuator) to a reasonable extent. If unnecessary kinematic energy is released with the artificial speed reduction control designed to prevent increase in gait speed caused by increase in time passed, it naturally brings question to the effectiveness of the actuator. As opposed to the already established studies, the authors are currently developing knee-ankle two actuator system under the concept of increasing lower limb stiffness by controlling the speed of gait in relative angular velocity of the two segments. Therefore, the author is convinced that compensatory mechanism caused by knee actuating must exist only in ankle joint. Ankle joint compensatory mechanism can be solved by reverse-examining the change in metatarso-phalangeal joint (MTPJ) tilt angle (${\theta}_1=0^{\circ}$, ${\theta}_2=17^{\circ}$, ${\theta}_3=30^{\circ}$) and the effect of change in gait speed on knee activity.

• Land and Housing Review
• /
• v.5 no.2
• /
• pp.57-68
• /
• 2014

As social needs are increasing to minimize the occurrence of external effect due to urban development and to diffuse the benefits of development to surrounding areas, diverse cooperative planning methods are increasingly being discussed. In the long term, laws and systems need to be refined to support cooperative planning, but prior to such development, elements, procedures, and methodologies wherein cooperative planning in U.S.A cases could be implemented were examined to derive the alternative to and implications of cooperative planning that can apply not only to single administrative districts but also to complex boundary new towns being developed by various local governments. This paper surveyed and analyzed the cases of Wisconsin State of the U.S.A, thereby deriving the following implications. First, joint planning areas should be established within the boundary area of various local governments to establish cooperative planning areas in special areas such as complex boundary new towns, and to this end, urban planning means should be prepared. Together with such efforts, to boost the flexibility of cooperative planning, life sphere unit-based planning unit should be established, and a well-organized operation system to activate communities should be prepared. Also, revenues, generated through regional growth, should be distributed to individual local governments through joint tax according to the agreed-upon ratios, and as such, measures to share services and operate joint tax in small-size regions should be secured. Together with such efforts, to establish cooperative governance, measures to manage conflicts through the participation by stakeholders and arbitrators should be prepared from the planning stage, and measures for implementing cooperative planning at the level of basic urban planning should be prepared.