• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.704-708
• /
• 2004

The RMD(Rehabilitation Medicine Device) with CJM(Compound Joint Motion) is the lower limb unit muscular strengthening promotion rehabilitation medicine device for patients of joint orthopedic operation or the deficient elder of ability to walk, the handicapped. Since the products for the rehabilitation medicine device have limited to the simplicity linear motion, those do not give efficient the lower unit muscular strengthening effects. This device which was under the development gives to exercise of hip joint and knee joint with user's selection at once, get out of the simplicity linear motion. Also it will be contributed to a field of rehabilitation medicine and a mobility aid technology of the deficient elders of ability to walk, the handicapped.

• Structural Engineering and Mechanics
• /
• v.48 no.2
• /
• pp.221-239
• /
• 2013

This paper focuses on a development of strut-and-tie model (STM) to predict the capacity of an improved longitudinal joint for decked bulb-tee bridge systems. Nine reinforced concrete beam/slab specimens anchored by spliced headed bars with different details were tested. Test results were evaluated and compared with an anticipation of the validated STM. The proposed STM provides a lower bound of the ultimate capacity of the joint zone. It shows that the lap length of headed bars has a significant effect on structural behaviors of the improved joint. To develop a full strength joint, the range of the lap length can be determined by the strength and compatibility requirement. Design recommendations to spliced headed bars, concrete strength, as well as lacer bars in the joint zone are proposed for developing a full strength joint.

• The Journal of Information Systems
• /
• v.10 no.1
• /
• pp.73-95
• /
• 2001

A significant body of information systems research is concerned with user participation as a means to improve user satisfaction within systems development. In spite of the many studies in this area, findings are not consistent or cumulative. One of the reasons for this is not to be considered the type of systems. Most research are focusing on traditional system development under the mainframe environment instead of under end-user based environment like web-based information system or ERP. End-user based environment requires user's strong initiatives in the system development life cycle. It means the user\`s simple participation is not enough and user-led-development is more appropriate for the system success. This paper can call this new concept is end-user joint work which means user has to participate in the system development as a co-developer. This paper investigates how the end-user joint work contributes end-user satisfaction and two variables in particular-job complexity and technical competence-moderate the outcomes of end-user joint work Analysis of 112 independent systems development projects indicated that end-user joint work has a direct relationship with end-user satisfaction. In addition, the two variables were found to moderate key roles on this relationship. That is, the strength of this relationship depended on the level of these factors.

• Journal of the Korean Society of Systems Engineering
• /
• v.9 no.2
• /
• pp.69-82
• /
• 2013

US DoD operated JCIDS(Joint Capability Integration and Development System) for top down requirement generation. Although the JCIDS can be a good practice for the countries which are trying to shift from bottom up to top down requirement generation, it contains many processes related with review and approval. In this study we structured a joint capability integration and development process from the JCIDS eliminating the organization dependent review or approval process so that it can be applied to any organization with some modification. Furthermore we implemented the process in the computer aided systems engineering tool, Cradle, for convenient use of the process. The result of this study can provide a basic process for top down capability development, and an efficient why of doing each element of the process using CASE tool.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2420-2422
• /
• 2004

In this paper, we developed a miniaturized humanoid having the new joint mechanism. In general, the high torque actuator and the joint mechanism having three coincided axes are important in development of the miniaturized humanoid. By using the swash plate, which is generally used in three axes rotor mechanism, we developed a new three-coincided-axes joint mechanism and a miniaturized humanoid having the joint mechanism at its hip and ankle joints. Since the joint mechanism has a pair of parallel drive motors for each axis, the driving torque of the joint mechanism is very high. Futhermore, thanks to the three-coincided-axes mechanism, the solution of the inverse kinematics is simple and computationally efficient, and the resulting walking behavior of the humanoid becomes natural.

• Journal of information and communication convergence engineering
• /
• v.2 no.4
• /
• pp.247-250
• /
• 2004

Currently, advanced countries such as European countries and Japan invest lots of efforts to develop improvement of electric power production and supply, environmental countermeasure, and renewable energy development. Accordingly, Korea has been putting efforts to all kinds of electric related technical development based on the mid-long term plan. Further, it is necessary to increase effectiveness of R&D investment by propelling joint research activities with advanced countries for development of important technologies. Based on this background, this study tries to find thought-provoking suggestions of energy projects, programs and policies. For a comparative analysis, Japan which is similar to Korea in terms of market size and policies, and EU where joint research has been actively carried out among nations are analyzed and compared to policies and joint R&D activities of Korea.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.91-99
• /
• 2018

Mechanical Properties of Rock Slope as a safe and effective interpretation should be thoroughly investigated. Clinometer, however, this new measurement due to the restrictions of the research for the joint orientation is needed. In this study, characteristics of the joint orientation can be used to analyze the joint orientation of developing a joint survey system that can be applied to the field. The system is developed and Analysis software to hardware. Hardware is composed to measure the joint orientation of measuring module, measuring the transfer of data transfer module. From the software is measuring module from the data to analyze the orientation of the joint development, and drone joint orientation survey system named. Can not be measured by the investigation, including regional development approach is a system that has been difficult if the Field Application of the lab test results of the joint orientation and effectively.

• Journal of Distribution Science
• /
• v.15 no.9
• /
• pp.95-107
• /
• 2017

Purpose - In the joint development of new products, buyers and suppliers exchange information to solve various problems. Uncertainty and ambiguity are typical examples. Uncertainty refers to the lack of information to solve the problem, and equivocality refers to the case where the information is interpreted in multiple processes in the process of providing the information. These uncertainty and equivocality cause new products to be delayed in their development and adversely affect quality. However, unfortunately, there is a lack of researches on how the uncertainty and equivocality of such concepts control the results of new product joint development. But, smooth communication and effective exchange of information is not emphasized only in the general organization. The importance of the new product joint development projects to achieve the two organizations' common goals becomes even greater. The purposes of this study are to analyse the effect of supplier's strategy on the NPD performance and moderating effect of uncertainty and equivocality. Research design, data, and methodology - In order to make a contribution to the lack of academic researches in Korea, this study collects data through questionnaires based on organizational information processing theory and previous studies, and conducts empirical analysis. Results - As a result, the product modularization strategy and the strategic supply chain relationship positively influenced the new product development performance - return on investment and ease of manufacturing. And the interaction effect of uncertainty and equivocality with supplier's strategy - product modularity strategy and strategic supply chain management relationship - reduces or negates the influence of product modularization strategy on new product development performance. Conclusions - This implies that it is important to control uncertainty and equivocality in order for the supplier strategy to have a positive effect on new product development performance. It also emphasizes the necessity of sharing information appropriately for companies that do not want to share the information as possible due to their fear of loss of competitive advantage in the joint development of new products. Because this kind of negative policy might let uncertainty and equivocality be happen in new product joint development process.

• Journal of the Korea Furniture Society
• /
• v.27 no.4
• /
• pp.291-301
• /
• 2016

As a detailed process for the development of new wooden furniture design that is to be used in elderly group homes, this study measured and analyzed physical and visual durability of joint techniques, one of the essential manufacturing techniques. By selecting a total of 4 joint techniques, an experiment to measure a compressive strength was conducted and targeting a group of 50 elderly people, a survey on visual durability and preference of visual aesthetics was carried on. As a result of closely analyzing the experiment of measuring compressive strength and the preference survey, 'mitre joint technique' was found to be the most suitable in manufacturing wooden furniture and through follow-up studies, the result of this study will be applied in the development of wooden furniture design for elderly group homes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.337-338
• /
• 2010