• Composites Research
• /
• v.29 no.3
• /
• pp.117-124
• /
• 2016

The failure strength of composite single-lap joint repaired using scarf patch was investigated by test and finite element method. A total of 45 specimens were tested changing scarf ratio, stacking pattern, and defect size to study the failure strength and mode. Except for one case, all repaired specimens showed the equal or higher strength than the sound specimens and the effect of considered repair parameters was not remarkable. It was found through the failure mode inspection that the surface treatment for bonding was not enough in the case which failed at the lower load than the sound specimen. Three-dimensional finite element analysis was conducted to verify the test results. It was confirmed that the considered repair parameters do not significantly affect the stress distribution of the specimens. It was also observed that the applied tensile load is relieved passing through the overlapped region thickness of which is almost double. From this study, it is concluded that if the bonding procedure for adherends and patch including surface treatment for fabric layer is thoroughly followed, the strength of repaired single-lap joint can be restored up to the strength of sound one.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.11
• /
• pp.1741-1754
• /
• 2020

Objective: This study was conducted to estimate genetic parameters for milk yield traits using daily milk yield records from parlour data generated in an intensively managed commercial dairy farm with Jersey and Jersey-Friesian cows in Sri Lanka. Methods: Genetic parameters were estimated for first and second lactation predicted and realized 305-day milk yield using univariate animal models. Genetic parameters were also estimated for total milk yield for each 30-day intervals of the first lactation using univariate animal models and for daily milk yield using random regression models fitting second-order Legendre polynomials and assuming heterogeneous residual variances. Breeding values for predicted 305-day milk yield were estimated using an animal model. Results: For the first lactation, the heritability of predicted 305-day milk yield in Jersey cows (0.08±0.03) was higher than that of Jersey-Friesian cows (0.02±0.01). The second lactation heritability estimates were similar to that of first lactation. The repeatability of the daily milk records was 0.28±0.01 and the heritability ranged from 0.002±0.05 to 0.19±0.02 depending on day of milk. Pearson product-moment correlations between the bull estimated breeding values (EBVs) in Australia and bull EBVs in Sri Lanka for 305-day milk yield were 0.39 in Jersey cows and -0.35 in Jersey-Friesian cows. Conclusion: The heritabilities estimated for milk yield in Jersey and Jersey-Friesian cows in Sri Lanka were low, and were associated with low additive genetic variances for the traits. Sire differences in Australia were not expressed in the tropical low-country of Sri Lanka. Therefore, genetic progress achieved by importing genetic material from Australia can be expected to be slow. This emphasizes the need for a within-country evaluation of bulls to produce locally adapted dairy cows.

• Journal of Korean Medicine Rehabilitation
• /
• v.21 no.1
• /
• pp.79-95
• /
• 2011

Objectives : This study was to investigate the antiarthritic effect of Hwallak-dan(Huoluo-dan) on the complete freund's adjuvant(CFA)-induced arthritis in Lewis rats. Methods : Arthritis was induced by intradermal injection of CFA into base of tail. Experimental groups divided into normal(n=10), control(n=10) and treated(n=10) group. Animals of control group received normal saline for twenty days, treated group received extracts Hwallak-dan(Huoluo-dan) for same duration, light mineral oil only injected non-arthritic rats were served as normal group. The incidence of arthritis and arthritic index were observed after treatment. Body weight, paw edema volume and thickness of ankle joint were measured at 0, 11, 14, 17, 20 days after treatment. White blood cell(WBC) counts in blood were analysed at 20 days after treatment and tumor necrosis $factor-{\alpha}(TNF-{\alpha})$, $interleukin-1{\beta}(IL-1{\beta}$), IL-6 contents in paw exudate were analysed by ELISA at 20 days after treatment. Histopathology on the ankle joint were performed at 20 days after treatment. Results : 1. Incidence of arthritis of treated group was 60% and control group was 100% at 20 days after treatment. 2. Arthritic index of treated group was significantly decreased compared with control group at 20 days after treatment. 3. Paw edema volume and thickness of ankle joint of treated group was significantly decreased compared with control group at 20 days after treatment. 4. Total WBC of treated group was significantly decreased compared with control group at 20 days after treatment. 5. Neutrophils of treated group was significantly decreased compared with control group at 20 days after treatment. 6. $TNF-{\alpha}$ content in paw exudate of treated group was significantly decreased compared with control group at 20 days after treatment. 7. $IL-1{\beta}$ content content in paw exudate of treated group was significantly decreased compared with control group at 20 days after treatment. 8. IL-6 content content in paw exudate of treated group was significantly decreased compared with control group at 20 days after treatment. 9. Histopathological arthritic index of treated group was significantly decreased compared with control group at 20 days after treatment. Conclusions : These results indicate that Hwallak-dan(Huoluo-dan) has inhibitory effect on the development and progression of CFA-induced arthritis in rats.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.323-332
• /
• 2019

Non-curable rubberized polymer asphalt waterproof coating materials in Korea and China are manufactured without advanced quality control techniques and common standard, And they are exposed consistent water leakage problems. Import and application of Korean waterproofing products and installation methods is difficult in the present situation as the Chinese standard(JC/T 2428) is different in nature with the Korean counterpart products, And quality assurance is inevitable based on mutual standards. In order to resolve this issue, alternatives such as using standards provided by the ISO (International Organization for Standardization) are generally employed, but there is no such ISO standard as a waterproof material for non-curable rubberized polymer asphalt material. Furthermore, it is unreasonable to develop the ISO standard for rubber asphalt seals for exchange in terms of time and cost. This study proposes that the establishment of a quality standard that can be applied for both countries will be required via an joint international standard that outlines the properties of materials if applied in mutual trade exchange.

• Journal of the Korean association of regional geographers
• /
• v.14 no.5
• /
• pp.492-506
• /
• 2008

This paper aims to explore the characteristics of regional network of Korean firms in Dalian City, China, which is focused on social, cultural and institutional characteristics. To achieve this goal, the paper attempts to analyze the supply of raw material and parts, sales and cooperative relations of the firms. Among Korean firms in Dalian City, the characteristic of non-local network can be seen in supply enterprise of raw material, parts and semi products. On the other hand, a tighter local network relationship can be seen in sales. Large companies appear stronger in non-local network than small businesses and small businesses are stronger in local network. In terms of cooperation among enterprises, many firms have networks of joint marketing, joint use of equipments, exchange of techniques and information with the supply enterprise. With the customer enterprise, there is a network in joint marketing and manpower training. Especially, most of the customer enterprises are Chinese ones, which have extensive networks in big cities, such as in Beijing, Shanghai, Guangzhou, Tianjin and Dalian. In local network, the Korean firms in Dalian cooperate in product development, finance and manpower training with local firms. And in non-local cooperation, Korean firms are active in tech support, information exchange and R&D.

• Journal of Korea Technology Innovation Society
• /
• v.22 no.2
• /
• pp.159-185
• /
• 2019

Chemical industry, as one of the basis industries of the country, is characterized by converged high-end technology and large scale capital investment. In 2018, the government announced "The Strategy for Chemical Industry Development" with the vision of 'An Upgrade to the Advanced Chemical Industry'. In the meantime, the advanced chemical industry in Korea has been developed not by its own R&D, but by the upgrading of technologies and processes through the technology transfer from developed countries. The method of technology transfer was mainly achieved with international joint ventures (hereafter IJV) linked with technology transferors from developed countries. As it is necessary to grasp the determinants of the technology transfer and their importance to promote the transfers through IJVs, this relative importance analysis study was conducted by using the method of quantifying experts' opinions (AHP) on the determinants of the technology transfer of both parties. As a result of the analysis, in the Hierarchy1(PEST factors), the technology transferees focus on economic factors such as 'profitability of technology transfer' and 'cost efficiency', while technology transferors considered technical factors such as 'operational excellence (abilities to continuously improve technology process)'. In addition, transferors and transferees have different priorities for technology transfer determinants in all areas of Hierarchy 2 (sub-determinants). This suggests that Korean government or enterprise should shift the policy direction toward 'technology-oriented' when they promote advanced-technology transfer through IJVs.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.120-132
• /
• 2019

As a key infrastructure for positioning autonomous vehicles, HD maps are making efforts to equip autonomous vehicles and connect them with services worldwide. Global companies like Here and TomTom have contracted an agreement with three German automobile companies(BMW, Audi, Daimler) by establishing systems including from the production of HD maps to loading autonomous vehicles. Japan has organized a DMP(Dynamic Map Platform) by collaborating public and private section and performing establishment of HD map on private section-oriented. Korean companies related with autonomous vehicles are also cooperating with various companies such as vehicles, sensors and maps. But public and private sections are establishing HD maps respectively. Accordingly, Ministry of Land, Infrastructure and Transport implemented and signed memorandum for private and public cooperation in April 2019, Joint establishment council of HD map has launched in August 2019. This study performed domestic and foreign trend analysis about HD map and interviewed to related companies. And analyzed solutions for interactive cooperation of private and public section in HD map industry, purposed step-by-step strategy for operation and operation plan for joint establishment council of HD map.

• Composites Research
• /
• v.31 no.6
• /
• pp.323-331
• /
• 2018

The effect of stainless steel jagged-pin reinforcement on the pull-off strength of the composite hat-joint was studied by the test. The pins were physically and chemically surface-treated and inserted in the thickness direction over the interface where the skin and stiffener meet. The specimens including the jagged-pins were made by co-curing process. Diameters of the jagged-pins were 0.3, 0.5 and 0.7 mm. The pin areal densities were set to 0.5 and 2.0% based on the interface area where the skin and stiffener meet. The specimens using 0.3 mm diameter normal (un-jagged) pins with 2.0% areal density were additionally fabricated and tested to investigate the pin shape effect on the pull-off strength. The pull-off strengths of specimens reinforced with 0.5% areal density by 0.3, 0.5, and 0.7 mm diameter pins were 45, 19 and 9% higher than those of un-reinforced specimens, respectively. In case with 2.0% pin areal density, the strengths were 127, 45, and 11% higher than those of un-reinforced specimens, respectively. The test results show that the higher pin areal density results in the higher strength when the pin diameter is the same. When the pin areal density is the same, the smaller pin diameter leads to higher strength. When the joints using jagged-pins and normal pins in 2.0% areal density with 0.3 mm diameter, the joints of jagged-pins showed the 64% higher strength. From the results of this study, it was confirmed that jagged-pin reinforcement can be an effective method for improving the pull-off strength of composite hat-joint.

• Journal of Veterinary Science
• /
• v.21 no.5
• /
• pp.80.1-80.13
• /
• 2020

Background: In suckling piglets, transmissible gastroenteritis virus (TGEV) causes lethal diarrhea accompanied by high infection and mortality rates, leading to considerable economic losses. This study explored methods of preventing or inhibiting their production. Bovine antimicrobial peptide-13 (APB-13) has antibacterial, antiviral, and immune functions. Objectives: This study analyzed the efficacy of APB-13 against TGEV through in vivo and in vitro experiments. Methods: The effects of APB-13 toxicity and virus inhibition rate on swine testicular (ST) cells were detected using 3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT). The impact of APB-13 on virus replication was examined through the 50% tissue culture infective dose (TCID₅₀). The mRNA and protein levels were investigated by real-time quantitative polymerase chain reaction and western blot (WB). Tissue sections were used to detect intestinal morphological development. Results: The safe and effective concentration range of APB-13 on ST cells ranged from 0 to 62.5 ㎍/mL, and the highest viral inhibitory rate of APB-13 was 74.1%. The log₁₀TCID₅₀ of 62.5 ㎍/mL APB-13 was 3.63 lower than that of the virus control. The mRNA and protein expression at 62.5 ㎍/mL APB-13 was significantly lower than that of the virus control at 24 hpi. Piglets in the APB-13 group showed significantly lower viral shedding than that in the virus control group, and the pathological tissue sections of the jejunum morphology revealed significant differences between the groups. Conclusions: APB-13 exhibited good antiviral effects on TGEV in vivo and in vitro.

• Nutrition Research and Practice
• /
• v.16 no.5
• /
• pp.589-603
• /
• 2022

BACKGROUND/OBJECTIVES: Previous studies have reported that protein supplementation contributes to the attenuation of inflammation. Serious trauma such as burn injury usually results in the excessive release of inflammatory factors and organs dysfunction. However, a few reports continued to focus on the function of protein ingestion in regulating burn-induced inflammation and organ dysfunction. MATERIALS/METHODS: This study established the rat model of 30% total body surface area burn injury, and evaluated the function of blended protein (mixture of whey and soybean proteins). Blood routine examination, inflammatory factors, blood biochemistry, and immunohistochemical assays were employed to analyze the samples from different treatment groups. RESULTS: Our results indicated a decrease in the numbers of white blood cells, monocytes, and neutrophils in the burn injury group administered with the blended protein nutritional support (Burn+BP), as compared to the burn injury group administered normal saline supplementation (Burn+S). Expressions of the pro-inflammatory factors (tumor necrosis factor-α and interleukin-6 [IL-6]) and chemokines (macrophage chemoattractant protein-1, regulated upon activation normal T cell expressed and secreted factor, and C-C motif chemokine 11) were dramatically decreased, whereas anti-inflammatory factors (IL-4, IL-10, and IL-13) were significantly increased in the Burn+BP group. Kidney function related markers blood urea nitrogen and serum creatinine, and the liver function related markers alanine transaminase, aspartate aminotransferase, alkaline phosphatase, and lactate dehydrogenase were remarkably reduced, whereas albumin levels were elevated in the Burn+BP group as compared to levels obtained in the Burn+S group. Furthermore, inflammatory cells infiltration of the kidney and liver was also attenuated after burn injury administered with blended protein supplementation. CONCLUSIONS: In summary, nutritional support with blended proteins dramatically attenuates the burn-induced inflammatory reaction and protects organ functions. We believe this is a new insight into a potential therapeutic strategy for nutritional support of burn patients.