• 대한기계학회논문집B
• /
• 제22권5호
• /
• pp.607-617
• /
• 1998

Comparisons of joint probability density distribution obtained from the raw data of measured droplet sizes and velocities in a transient diesel fuel spray with computed joint probability density function were made. Simultaneous droplet sizes and velocities were obtained using PDPA. Mathematical probability density functions which can fit the experimental distributions were extracted using the principle of maximum likelihood. Through the statistical process of functions, mean droplet diameters, non-dimensional mass, momentum and kinetic energy were estimated and compared with the experimental ones. A joint log-hyperbolic density function presents quite well the experimental joint density distribution which were extracted from experimental data.

• 자원환경지질
• /
• 제50권1호
• /
• pp.61-71
• /
• 2017

본 연구는 절리의 빈도 및 길이분포가 절리암반의 수리지질학적 특성에 미치는 영향을 평가하기 위하여 이차원 불연속절리망 (DFN; discrete fracture network) 유체유동 해석을 바탕으로 한 수치실험을 수행하였다. 두개의 절리군을 사용하여 절리의 빈도와 길이분포를 달리하며 추계론적으로 생성한 총 51개의 DFN 시스템에 대하여 $0^{\circ}$부터 매 $30^{\circ}$ 간격으로 총 12 방향으로 구현한 총 612개의 $20m{\times}20m$ DFN 블록에서 방향에 따른 블록수리전도도가 산정되었다. 또한, 각각의 DFN 시스템에서 이론적 블록수리전도도와 더불어 주 수리전도도텐서, 평균 블록수리전도도 등이 산정되었다. 절리군의 빈도의 증가 또는 길이의 평균 및 표준편차 증가에 따라 임의 방향으로의 블록수리전도도는 증가하며 DFN 시스템에 대한 등가연속체 취급 가능성이 높아지지만, 절리군 간의 빈도 차이가 커지면 블록수리전도도의 이방성 증대로 인하여 등가연속체 취급 가능성이 낮아질 수 있는 것으로 평가되었다. 두 절리군의 교차각이 작을수록 등가연속체 특성은 빈도 및 길이분포의 변화에 상대적으로 더욱 영향을 받는 것으로 평가되었다. 등가연속체로 취급하기 어려울 정도로 두 절리군의 교차각이 작아도 절리군의 빈도 또는 길이 분포가 증가하면 등가연속체 취급 가능성은 높아진다.

• Journal of Welding and Joining
• /
• 제17권6호
• /
• pp.32-37
• /
• 1999

Since stainless steel plates have good mechanical properties, weldability, appearance and resistance of corrosion, these are traditionally used for vehicles such as the bus and the train. And they are mainly fabricated by spot welding. But fatigue strength of their spot welded joint is considerably influenced by welding conditions as well as geometrical factors. Thus a reasonable and systematic criterion for long life design of spot welded body structure must be established. In this report, strain energy density was analyzed by using 3-dimensional finite element model about the IB-type spot welded lap joint under tension-shear load. Fatigue tests were conducted on them having various thickness, joint angle, lapped length and width. From their results, it was found that fatigue strength of the IB-type spot welded lap joints could be effectively and systematically rearranged by strain energy density at the edge of nugget.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권12호
• /
• pp.5401-5421
• /
• 2016

Both low-density parity-check (LDPC) codes and the multiple access technique of spatially coupling data transmission (SCDT) can be expressed in bipartite graphs. To improve the performance of iterative demodulation and decoding for SCDT, a novel joint sparse graph (JSG) with SCDT and LDPC codes is constructed. Based on the JSG, an approach for iterative joint demodulation and decoding by belief propagation (BP) is presented as an exploration of the flooding schedule, and based on BP, density evolution equations are derived to analyze the performance of the iterative receiver. To accelerate the convergence speed and reduce the complexity of joint demodulation and decoding, a novel serial schedule is proposed. Numerical results show that the joint demodulation and decoding for SCDT based on JSG can significantly improve the system's performance, while roughly half of the iterations can be saved by using the proposed serial schedule.

• Journal of Electrical Engineering and information Science
• /
• 제1권1호
• /
• pp.151-155
• /
• 1996

This paper derives the two-dimensional probability distribution and density functions of morphological dilation and erosion of a one-dimensional memoryless source and reports numerical results for a uniform source, thus providing methodology for joint distributions for other morphological operations. The joint density functions expressed in closed forms contain the Dirac delta functions due to the joint discontinuity within the dilation and erosion. They also exhibit symmetry between these two morphological density functions of dilated and/or eroded sources, in the computation of other higher moments thereof, and in multidimensional quantization.

• 지질공학
• /
• 제18권4호
• /
• pp.483-492
• /
• 2008

낙동강 중류 지역(함안근, 창령군, 의령군)의 백악기 퇴적암의 단열계 특성(단열 방향성과 단열계 밀도도)을 파악하고, 단열과 단층, 수계 그리고 연구지역내 지하수공의 일일 사용량과의 관련성을 분석하였다. 단열계는 JI($N90^{\circ}-110^{\circ}E$), J2($N0^{\circ}-35^{\circ}E$), J3($N0^{\circ}-35^{\circ}W$)로 분류되며, 주로 남북방향과 동서방향 단열군의 방항성이 우세하다. 연구지역의 동편과 서편의 함안층 분포지역에서는 남북방향의 단열계가 우세한 반면에, 연구지역의 중간부분인 칠곡층 분포지역에서는 동서방향의 단열계기 우세하다. 이는 연구지역의 동편과 서편에 위치하는 북북동-남남서 방향의 단층계와 관련되는 것으로 보인다. 또한 낙동강 주변에서도 단열 밀도가 높게 나타나며, 이는 동서방향의 단열계가 낙동강과 연관됨을 암시한다. 한편, 연구지역내 지하수공의 일일 사용량과 단열 밀도 간에는 약한 양의 상관성을 보이며, 지하수 비양수량과 단열 밀도간에는 음의 상관성을 보인다. 이는 단열 밀도가 지하수 산출량을 결정하는 주요 요인이 될 수 없음을 지시한다.

• 지질공학
• /
• 제19권2호
• /
• pp.145-152
• /
• 2009

절리는 전파할 때 상대적인 이동이 절리 벽에 수직으로 일어난 평탄한 신장 열림 모드 단열이다. 층상 퇴적암에 발달하는 절리는 일반적으로 층리면에 수직이고 인접한 절리와 평행한 배향과 규칙적인 간격을 가지며 절리 조를 이룬다. 본문은 층상 퇴적암의 절리에 대한 최근 연구 결과들을 토대로 절리 전파의 역학적 규제, 층두께-절리간격의 관계, 절리 간격의 빈도 분포, 절리 포화, 절리 밀도, 교차 절리, 절리 발달 기구 등을 고찰 한다.

• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.1-10
• /
• 2012

We fabricated a closed coils by using resistive-joint method and the joint resistance of the coils were estimated by field decay technique in liquid nitrogen. We used the Runge-kutta method for the numerical analysis to calculate the decay properties. The closed coil was wound by $(Bi,Pb)_2Sr_2Ca_2Cu_3O_x$/Ag tape. Both ends the tape were overlapped and soldered to each other. The current was induced in a closed coils by external magnetic flux density. Its decay characteristic was observed by means of measuring the magnetic flux density generated by induced current at the center of the closed coil with hall sensor. The joint resistance was calculated as the ratio of the inductance of the loop to the time constants. The joint resistances were evaluated as a function of critical current of loop, contact length, sweep time, and external magnetic flux density in a contact length of 7 cm. It was observed that joint resistance was dependent on contact length of a closed coil, but independent of critical current, sweep time, and external magnetic flux density. The joint resistance was measured to be higher for a standard four-probe method, compared with that for the field decay technique. This implies that noise of measurement in a standard four-probe method is larger than that of field decay technique. It was estimated that joint resistance was $8.0{\times}10^{-9}{\Omega}$ to $11.4{\times}10^{-9}{\Omega}$ for coils of contact length for 7 cm. It was found that 40Pb/60Sn solder are unsuitable for persistent mode.

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.79-85
• /
• 1990

Traditional complex joints have used to a wide variety of wooden furniture construction. Dowel joint is the most popular joint s. However design of this joint to meet specified service condition has been hampered by a lack of proven design formulas which can be use to predict their strength. The object of this study is to investigate the withdrawal strength and effect of dowel diameters in wood and wood based materials. The obtained results were as follows; 1. The relationship between withdrawal strength and dowel diameter is found to be linear. 2. Withdrawal strength of medium density fiberboard and Sepetir in end-to-side joints is superior to Antiaris, particleboard and plywood. 3. In end-to-end joints, withdrawal strength of medium density fiberboard is the most superior joint. but Sepetir. Antiaris and plywood have similarly strength and particleboard is inferiority. 4. Withdrawal strength in end-to-end joints of Antiaris and plywood is higher than in end-ta-side joints. But in end-to-end joints of Sepetir. medium density fiberboard and particleboard is similarity in end-to-side joints.

• 한국지진공학회논문집
• /
• 제9권6호
• /
• pp.53-58
• /
• 2005

본 연구에서는 지진하중을 받는 교량의 거동을 확률밀도함수를 통하여 분석할 수 있는 기법을 개발하였다. 확률밀도함수의 전개는 추계론적 이론을 이용한 반해석적 방법을 통하여 구하였으며, 반해석적 방법은 교량운동방정식으로부터 상응하는 Fokker-Planck equation을 구한 후, path-integral solution을 유도하여 이를 수치적으로 해석함으로써 구할 수 있다. 교량거동의 확률밀도 함수전개로부터 교량거동의 확률적 특성을 파악하고 확률밀도함수의 범위로부터 교량응답거동의 포락선을 얻을 수 있으며 이를 이용하여 최대응답의 범위를 결정할 수 있다는 것을 밝혔다.