• 한국가구학회지
• /
• 제27권3호
• /
• pp.165-174
• /
• 2016

To modularize the joints of Hanok, the bending strengths of butterfly joints between pre-cut and manual member were compared. Structural size joints were manufactured and the length, width and thickness of each tenon were produced with different sizes. The ultimate load of pre-cut members was 2 times higher than that of manual members. Degree of anchorage for the joints on pre-cut member was also superior to that of manual member. By the F-test results, a great influence between ultimate load and sizes of tenon was found. In result of multiple regression analysis, the length and thickness of tenon were showed proportion relationships with the ultimate load, but the width of tenon was showed inverse proportion with the ultimate load. The results of this study can be used to identify the relationships among the major influence factors. Futhermore, it might be used as basic data for modularization the joints of Hanok.

• 한국분말재료학회지
• /
• 제1권2호
• /
• pp.198-207
• /
• 1994

In order to find an optimal friction-welding condition for Ni-base ODS alloy (MA 754) produced by mechanical alloying, joint experiments were performed with various conditions of friction pressures (50~500 MPa), friction times (1~5 sec) and upset pressures (50~600 MPa). The optimal friction pressure and upset pressure must be above 400 MPa and 500 MPa, respectively, which are determined by tensile strengths and fracture features of as-welded joints. A maximum stress설h of 975 MPa could be obtained under these pressure conditions at friction time of 2 sec. Microstructural features of bonded interface by optical microscope and SEM revealed that the interface regions of all specimens are consisted with three distinct regions and defects such as voids, cracks and wavy interfaces exist in the joints produced under not-optimized conditions. EDS results showed that these defects include oxides composed with elements of Al, Y and Ti. The hardness on the bonded interface was higher than in the base metal region. Specimens fractured in bonded interface region had lower strength values compared to those fractured in base metal region. Surfaces of the former showed a typical intergranular fracture.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.67-74
• /
• 2001

In domestic, irregular walls such as T, L, H and Box shapes are considered as rectangular wall in the design of bearing wall apartment building. The strengths of walls, therefore, can be underestimated in case of using the current design process. Irregular walls are connected to each other as rigid joint so that part of the load can be resisted by the wall perpendicular to the load direction. This resistance can be caused by the effective width of perpendicular wall. This additional resistance by the perpendicular wall increases the strength of structural walls. The objective of this study is to evaluate the effective widths of flanged walls with different aspect ratios by using FEM analyses. the results from finite element method are compared with effective flange widths of some code provisions.

• Journal of Mechanical Science and Technology
• /
• 제17권8호
• /
• pp.1113-1119
• /
• 2003

Experimental and numerical analyses were performed to characterize the fatigue behavior of spot welded joints in suspension mounting of a passenger car body. Static and fatigue tests were carried out for the tensile-shear and cross-tension specimens. S-N curve and fatigue strengths were obtained from the fatigue test of various specimens. Nonlinear finite element analysis showed that fatigue behavior of spot welded joints could be well estimated in terms of Von Mises stress at the nugget edge. Fatigue behavior of spot welded joint was represented by Von Mises stress better than the fatigue load.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.108-113
• /
• 2004

According to our fatigue tests carried out at 20 Hz, R=0.1 on transversely butt~welded joints, fatigue strengths of as-welded specimens, that is, specimens having residual stress are higher than those of annealed specimens in short life range, but vice verse in long life range. This behavior seems to be concerned mainly with residual stress relaxation by applied loading. After analyzing the welding process, we conducted finite element analysis to quantify the degree of residual stress relaxation. By taking into account residual stress relaxation, modified Goodman diagram, and nominal stress, we evaluated the fatigue life of the welded joint from the S-N curve for the parent material. The estimated results are in a good agreement with the experimental results.

• 국제물리치료학회지
• /
• 제8권2호
• /
• pp.1158-1162
• /
• 2017

The purpose of the study was to investigate the strength of sokinetic muscle by the position of a volleyball players. Analysis and comparison of shoulder dynamic stability will be conducted according to rotational movement of the shoulder during spiking and serving amongst the various positions. Fifty professional Korean female volleyball players (age: 20~30), all different positions - attacker (left and right), center, setter, and libero were The concentric peak torque, strength ration of the internal and external rotation of the shoulder girdle for both dominant and non-dominant arms. Firstly, there were significant differences found for the strength ratio between the setter and the other positions in the dominant arm. On a second note, there was a significant decrease in shoulder dynamic stabilization for both the attacker and center in the dominant arm. However, there were no significant differences for the setter or the libero. This study suggests that the isokinetic muscle strengths of the volleyball players are different from each other.

• 터널과지하공간
• /
• 제26권5호
• /
• pp.384-395
• /
• 2016

절리면의 전단거동 특성을 알아보기 위하여 암석종류와 거칠기가 서로 다른 110개의 자연 암석 절리면 시료에 대하여 거칠기 측정시험과 다단계전단시험을 실시하였다. 시험 암석은 석영반암, 석영안산암, 화강암, 편마암의 4가지 종류이고, 절리면은 JRC값에 따라 3가지 그룹으로 분류하였다. 거칠기 측정시험을 통해 절리면의 거칠기 파라미터를 분석하였으며, 다단계전단시험을 통해 암석종류, 절리면 거칠기, 수직응력의 변화가 각종 전단특성에 미치는 영향을 알아보았다. 절리면의 거칠기와 수직응력이 커질수록 최대전단강도와 전단강성은 증가하였고, 거칠기가 작고 수직응력이 커질수록 팽창각은 감소하였다. 절리면의 전단특성은 암석종류와 거의 무관한 것으로 나타나 모암의 강도보다는 거칠기와 수직응력에 더 큰 영향을 받았다. 또한 동일 암석 절리면에 대한 다단계시험과 직접전단시험의 결과를 비교분석함으로써 두 시험법의 특징을 고찰하였으며, 다단계시험으로 구한 팽창각은 시험 전반부의 낮은 수직응력수준에서 얻은 값만 유효한 것으로 나타났다.

• 지질공학
• /
• 제20권3호
• /
• pp.319-327
• /
• 2010

19개의 절리면에 대해 레이저 스캐너를 이용하여 형상을 측정한 후, 각 절리면의 30개 단면에 대하여 절리 거칠기 계수(Joint Roughness Coefficient)를 계산하였다. JRC 값은 단면의 위치에 따라 매우 큰 차이를 보이고 있으나 3개의 단면에서 측정된 JRC의 평균값은 절리면 전체의 JRC 평균값을 잘 대표할 수 있을 것으로 판단된다. 9개의 절리면에 대해서 석고를 이용한 복제 시료를 제작하여 절리면 전단시험을 실시하였다. 최대마찰각(${\phi}_p$)은 JRC의 평균값과 ${\phi}_p=41.037+1.046JRC$의 직선의 관계를 보인다. 그러나 절리면 전단시험에서 측정된 전단강도는 절리면에서 측정된 JRC의 평균값을 사용하여 Barton의 관계식에서 추정된 전단강도보다 상당한 오차를 보여, 절리면 전단시험에서 역산된 $JRC_R$과 JRC의 관계를 $JRC_R=f{\cdot}JRC$로 정의하고 회귀분석하여 수정계수 $f=3.15JRC^{-0.5}$를 도출하였고, 이 수정계수를 적용하여 Barton의 전단강도 관계식을 ${\tau}={\sigma}_n{\cdot}tan(3.15JRC^{0.5}{\bullet}{\log}_{10}\frac{JCS}{{\sigma}_n}+{\phi}_b)$로 수정하여 제안하였다. 이 관계식은 강도가 비교적 낮고 연성의 특성을 보이는 풍화암이나 연암의 절리면 전단강도 추정에 적용될 것으로 기대된다.

• Earthquakes and Structures
• /
• 제8권3호
• /
• pp.665-679
• /
• 2015

The strain rate of reinforced concrete (RC) structures stimulated by earthquake action has been generally recognized as in the range from $10^{-4}/s$ to $10^{-1}/s$. Because both concrete and steel reinforcement are rate-sensitive materials, the RC beam-column joints are bound to behave differently under different strain rates. This paper describes an investigation of seismic behavior of RC beam-column joints which are subjected to large cyclic displacements on the beam ends with three loading velocities, i.e., 0.4 mm/s, 4 mm/s and 40 mm/s respectively. The levels of strain rate on the joint core region are correspondingly estimated to be $10^{-5}/s$, $10^{-4}/s$, and $10^{-2}/s$. It is aimed to better understand the effect of strain rates on seismic behavior of beam-column joints, such as the carrying capacity and failure modes as well as the energy dissipation. From the experiments, it is observed that with the increase of loading velocity or strain rate, damage in the joint core region decreases but damage in the plastic hinge regions of adjacent beams increases. The energy absorbed in the hysteresis loops under higher loading velocity is larger than that under quasi-static loading. It is also found that the yielding load of the joint is almost independent of the loading velocity, and there is a marginal increase of the ultimate carrying capacity when the loading velocity is increased for the ranges studied in this work. However, under higher loading velocity the residual carrying capacity after peak load drops more rapidly. Additionally, the axial compression ratio has little effect on the shear carrying capacity of the beam-column joints, but with the increase of loading velocity, the crack width of concrete in the joint zone becomes narrower. The shear carrying capacity of the joint at higher loading velocity is higher than that calculated with the quasi-static method proposed by the design code. When the dynamic strengths of materials, i.e., concrete and reinforcement, are directly substituted into the design model of current code, it tends to be insufficiently safe.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권5호
• /
• pp.74-82
• /
• 2017

강교량은 유지관리가 충분히 이루어지지 않거나, 해안 과 같이 가설위치의 환경이 고온 다습한 경우 단면에 국부적인 부식손상이 발생할 수 있다. 특히 강거더 교량 의 지점부에서는 교대부와 강거더 단부의 공간이 협소하여 상대적으로 습도가 높고 신축이음부로부터의 강우 및 동결 방지제가 누수되어 침전물을 습윤상태로 유지하게 되므로, 복부판과 지점부 보강재에 집중적으로 부식이 발생되고 있으므로 이로인한 구조성능 변화를 확인하여야 한다. 따라서 본 연구에서는 실제 발생할 수 있는 강거더 단부 복부판과 보강재의 국부부식손상을 모사한 강재 실험체를 제작하고 이에 대한 단부 지압강도 변화를 실험적으로 평가하였다. 실험결과, 국부적 부식손상은 강거더 단부의 지압강도에 영향을 주며, 특히 수직 보강재에 의한 영향이 크게 나타남을 확인하였다.