• 전기학회논문지P
• /
• 제63권4호
• /
• pp.361-367
• /
• 2014

This paper is related to a new solar power conditioner for a built-in step-up chopper function. In the first step-up chopper proposed solar PV power conditioner for mutually connected in series with the input voltage of the bypass diodes are respectively connected to the positive terminal should install the mutual boosting chopper diode connected in series with the boost chopper switching element between the two power supply and at the same time the first and the second was connected to a second diode and a resonance inductor and a snubber capacitor in series with each other. And the common connection point between the bypass diode and the step-up chopper and the step-up chopper diode common connection point of the switching elements of the input voltage was set to the boost inductor for storing energy. In addition, between the step-up chopper and the step-up chopper diode and a switching element of a joint connection point of the first auxiliary diode and the second common connection point of the auxiliary diode was provided, the resonance capacitor. Between the step-up chopper and the step-up chopper diode and a switching element of a joint connection point and the common connection point of the resonance inductor snubber capacitor and connecting the third secondary diode, between two power supply lines is characterized by configuring the DC link capacitor bus lines in parallel. Therefore, it is possible to suppress the switching loss through, DC link bus lines, as well as there could seek miniaturization and weight reduction of the power conditioner itself by using a common capacitor of the non-polar non-polar electrolytic capacitor having a capacitor, the service life of the circuit can be extended and it is possible to greatly reduce the loss can be greatly improve the reliability of the product and the operation of the product itself.

• Journal of Nutrition and Health
• /
• 제30권7호
• /
• pp.854-869
• /
• 1997

This study was conducted to evaluation the quality of meals served in elementary school based on nutrient contents and food diversity . A questionnaire was mailed to school foodservice dietitians requesting one week menus for April and October . Menus served in 388 schools from each province and from major cities in Korea were analyzed. Mean nutrient contents per meal of persons served, and food expenses per meal. Mean percentages of energy from fat was 20.2% , and was significantly l different by foodservice system. When nutrient contents were converted to amount per 1, 000kcal, all were higher than that calculated from RDA except calcium, iron, and Vitamin A. Most of these were not significantly different according to area, foodservice system, the number of persons served, and food expense per meal. Compared to 1/3 of RDA for children , many meals provided lower amounts of energy, Vit A, VitB2, and Ca. More than half of the meals provided less iron than 1/3 RDA for 10-12 years girls. Using the highest values of RDA for the elementary school age group as evaluation, criteria nutrient adequacy ratios(NAR) were lowest for Ca(0.61), Vit A(0.57), and iron(0.77). The mean adequacy ratio(MAR) was 0.86. Mean numbers of food items and dishes per meal were 15.3 and 5.1 , respectively. 66.3% of the meals provided three food groups of grain, meat, and vegetable. Except for the number of different food items served per meal, the aspect of food diversity was similar to that of nutrient contents. There was significant positive correlation between mean number of different food items served per meal and nutrient content . In summary , schools in small cities and rural areas than those in large cities, schools adapting commissary or joint management than those or density. Also the more food groups served per meal, the higher the nutrient content per meal . In summary , schools in small cities and rural areas than those in large cities, schools adapting commissary or joint management than those adapting conventional foodservice system, schools serving smaller number of persons, and schools with higher food expenses provided higher energy contents and food diversity.

• Current Photovoltaic Research
• /
• 제7권3호
• /
• pp.65-70
• /
• 2019

As a demand of higher power photovoltaic modules, shingled, multi-busbar, half-cell, and bifacial techniques are developed. Multi-busbar module has advantage for large amount of light havesting. And, half-cell is high power module for reducing resistive losses and higher shade tolerance. Recently, researches on multi-busbar is focused on reliability according to adhesion and intermetallic compound between Sn-Pb solder and Ag electrode. And half-cell module is researched to comparing with full-sized cell module for structure difference. In this study, we investigated the factors affecting to efficiency and adhesion of multi-wires half-cell module according to wire thickness, solder thickness, and flux. The results of solar simulator and peel test was that peel strength and efficiency of soldered cell is not related. But samples with flux including high solid material showed high efficiency. The results of FE-SEM and EDX line scan on cross-section between wire and Ag electrode for different flux showed thickness of solder joint between wire and Ag electrode is increasing through solid material increasing. Flux including high solid material would affect to solder behavior on Ag electrode. Higher solid material occurred lower growth of IMC layer because solder permeate to sider of wire ribbon than Ag electrode. And it increased fill factor for high efficiency. In soldering process, amount of solid material in flux and solder thickness are the factor related with characteristic of soldered photovoltaic cell.

• 대한물리의학회지
• /
• 제19권1호
• /
• pp.69-79
• /
• 2024

PURPOSE: This study compared the effect of the muscle energy technique (MET) and stretching technique on ankle dorsiflexion passive range of motion, balance, and gait ability of stroke patients with limited ankle dorsiflexion. METHODS: Forty-four post-stroke patients participated. The participants were randomized into the MET group (METG; n = 22) and the stretching group (STG; n = 22). The METG was subjected to the MET to relax the dorsiflexion, while the STG was subjected to the dorsiflexion stretching technique. Both groups completed standard neurological physical therapy for 30 min per session. The intervention was conducted five times a week over 3 weeks for a total of 15 times. All participants underwent ankle dorsiflexion passive range of motion measurement and Berg Balance Scale score determination and completed a 10-m walking test and the timed up and go test before and after the intervention. RESULTS: After the 3-week intervention, both groups showed significant improvement after the intervention (p < .05). METG participants showed greater improvements in ankle dorsiflexion passive range of motion and 10-m walking test results compared to STG participants (p < .05). CONCLUSION: Both interventions improved ankle dorsiflexion passive range of motion, balance, and gait ability in stroke patients with limited ankle dorsiflexion. Moreover, the MET was superior to ankle dorsiflexion passive range of motion on the 10-m walking test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.544-544
• /
• 2014

Energy harvesting technology, which scavenges electric power from ambient, otherwise wasted, energy sources, has been explored to develop self-powered wireless sensors and possibly eliminate the battery replacement cost for wireless sensors. Among ambient energy sources, vibration energy can be converted into electric power through a piezoelectric energy harvester. For the last decade, although tremendous advances have been made in design methodology to maximize harvestable electric power under a given vibration condition, the research in reliability assessment to ensure durability has been stagnant due to the complicated nature of the multiple failure modes of a piezoelectric energy harvester, such as the interfacial delamination, fatigue failure, and dynamic fracture. Therefore, this study presents the first-ever system reliability analysis for multiple failure modes of a piezoelectric energy harvester using the Generalized Complementary Intersection Method (GCIM), while accounts for the energy conversion performance. The GCIM enables to decompose the probabilities of high-order joint failure events into probabilities of complementary intersection events. The electromechanically-coupled analytical model is implemented based on the Kirchhoff plate theory to analyze its output performances of a piezoelectric energy harvester. Since a durable as well as efficient design of a piezoelectric energy harvester is significantly important in sustainably utilizing self-powered electronics, we believe that technical development on system reliability analysis will have an immediate and major impact on piezoelectric energy harvesting technology.

• 한국지반공학회논문집
• /
• 제25권10호
• /
• pp.17-30
• /
• 2009

지하에 공동을 건설하는 터널 공사의 경우 초기 응력의 집중 및 발파와 같은 시공단계에서의 과도한 에너지의 적용으로 인하여 주변 암반에 손상을 발생시킨다. 이러한 손상의 발생은 터널에 작용하는 하중 및 터널 주변 암반의 흐름조건에 상당한 영향을 끼친다. 이러한 이유로 터널 주변에 발생하는 손상구간에 대하여 다양한 연구가 수행되었다. 본 연구에서는 유사암석으로 제작된 공동이 존재하는 절리모델의 이축압축실험을 통하여 공동주변의 손상발생을 연구하였다. 절리면은 수평면과 $30^{\circ}$, $45^{\circ}$, $60^{\circ}$의 조건으로 형성되었으며, 초조강시멘트 재료를 이용하여 유사절리모델을 제작하였다. 이축압축 실험결과 공동주변에서는 절리면에 수직한 방향으로 인장균열의 발생이 관측되었으며, 균열의 진행으로 인하여 암반블록이 형성되었으며, 진행하는 인장균열이 다른 절리면에 도달하여 암반블록이 완전히 형성된 경우 탈락하는 과정을 보였다. 이러한 인장균열의 진전은 절리면의 각도에 따라 상이한데 절리면의 각도가 클수록 안정적이며 진행성의 균열 진전 양상이 관측되었다. 이러한 인장균열의 발달은 절리면으로 구성된 암편을 보로 가정 할 경우 공동의 곡률로 인한 기하학적 형상의 불규칙성으로 인하여 모멘트가 작용하는 것으로 판단된다. 이상의 실험결과를 입자요소해석 방법을 기반으로 하는 PFC 2D를 이용하여 모사하였다. 해석결과 실험에서 관측한 바와 같이 절리면 각도가 작을수록 손상대의 폭은 넓어지며 인장균열의 진행에 의한 암반블록의 형성이 관측되었다. 또한 상호작용이 발생하는 균열을 조사한 결과 수치해석에서도 절리면의 각도가 작은 조건에서 진행성의 파괴가 나타났다.

• Nuclear Engineering and Technology
• /
• 제44권6호
• /
• pp.673-682
• /
• 2012

Three dimensional atom probe tomography (3D APT) is applied to characterize the dissimilar metal joint which was welded between the Ni-based alloy, Alloy 690 and the low alloy steel, A533 Gr. B, with Alloy 152 filler metal. While there is some difficulty in preparing the specimen for the analysis, the 3D APT has a truly quantitative analytical capability to characterize nanometer scale particles in metallic materials, thus its application to the microstructural analysis in multi-component metallic materials provides critical information on the mechanism of nanoscale microstructural evolution. In this study, the procedure for 3D APT specimen preparation was established, and those for dissimilar metal weld interface were prepared near the fusion boundary by a focused ion beam. The result of the analysis in this study showed the precipitation of chromium carbides near the fusion boundary between A533 Gr. B and Alloy 152.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1110-1122
• /
• 2018

This paper proposes an alternative method to evaluate the effect of wind power to the power system stability with small disturbance. Alternatively, available techniques for stability analysis of a power system based on deterministic methods are less accurate for high penetration of wind power. Numerical simulations of random behaviors are computationally expensive. A stochastic stability index (SSI) is proposed for the power system stability evaluation based on the theory of stochastic stability and energy function, specifically the stochastic derivative of the relative well-defined energy function and the critical energy. The SSI is implemented on the modified nine-bus system including wind turbines under different conditions. A doubly-fed induction generator (DFIG) wind turbine is characterized and modeled using measured wind data from several sites in Thailand. Each of the obtained wind power data is analyzed. The wind power effect is modeled considering the aggregated effect of wind turbines. With the proposed method, the system behavior is properly predicted and the stability is quantitatively evaluated with less computational effort compared with conventional numerical simulation methods.

• 한국소음진동공학회논문집
• /
• 제11권6호
• /
• pp.181-192
• /
• 2001

The power flow analysis (PFA) has been performed to analyze the vibration of coupled plates excited by a point force in an arbitrary direction. The point force generates the out-of-plane vibration associated wish flexural waves and the in-plane vibration associated with longitudinal and shear waves. The energy governing equation for each type of waves was introduced and solved to Predict the vibrational energy density and intensity generated by the out-of-plane and in-plane components of the point force in an arbitrary direction. The wave transmission approach was used to consider the mode conversion at the joint of the coupled plates. Numerical results for vibrational energy density and intensity on the coupled plates were presented. Comparison of the results by PFA with exact results showed that PFA can be an effective tool to predict the spatial variation of the vibrational energy and intensity on the coupled plates at high frequencies.

• 한국태양에너지학회 논문집
• /
• 제31권2호
• /
• pp.63-71
• /
• 2011

The remote-sensng campaign was performed at the Pohang Accelerator Laboratory where is located in a basin 6km inland from Yeongil Bay. The campaign aimed uncertainty assessment of Remtech PA0 SODAR through a mutual comparison with WindCube LIDAR, the remote-sensing equipment for wind resource assessment. The joint observation was carried out by changing the setup for measurement heights three times over two months. The LIDAR measurement was assumed as the reference and the uncertainty of SODAR measurement was quantitatively assessed. Compared with LIDAR, the data availability of SODAR was about half. The wind speed measurement was fitted to a slope of 0.94 and $R^2$ of 0.79 to the LIDAR measurement. However, the relative standard deviation was about 17% under 150m above ground level. Therefore, the Remtech PA0 SODAR is judged to be unsuitable for the evaluation of wind resource assessment and wind turbine performance test, which require accuracy of measurement.