• Journal of Korean Society on Water Environment
• /
• v.39 no.1
• /
• pp.9-19
• /
• 2023

Drought is a natural disaster that can have serious social impacts. Drought's impact ranges from water supply for humans to ecosystems, but the impact of drought on river water quality requires careful investigation. In general, drought occurs meteorologically and is classified as agricultural drought, hydrological drought, and environmental drought. In this study, the BOD environmental drought is defined using the bivariate copula joint probability distribution model between the meteorological drought index and the river BOD, and based on this, the environmental drought condition index (EDCI-BOD) was proposed. The results of examining the proposed index using past precipitation and BOD observation data showed that EDCI-BOD expressed environmental drought well in terms of river BOD water quality. In addition, by classifying the calculated EDCI-BOD into four levels, namely, 'attention', 'caution', 'alert', and 'seriousness', a practical monitoring stage for environmental drought of BOD was constructed. We further estimated the sensitivity of the stream BOD to meteorological drought, and through this, we could identify the stream section in which the stream BOD responded relatively more sensitively to the occurrence of meteorological drought. The results of this study are expected to provide information necessary for river BOD management in the event of meteorological droughts.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.1
• /
• pp.60-69
• /
• 2023

Objectives: Business operators handling hazardous chemicals regulated under the Chemical Substances Control Act (CSCA) must receive permits to operate their business from the Ministry of Environment. This study analyzed the status of recent legal violation in chemical handling workplaces in Ulsan where a large volume of chemicals is handled for industrial use. Methods: A total of 557 corporations have been granted legal status as business operators in Ulsan. For all business operators, legal violations in regard to the CSCA that were discovered by the environmental office in the last five years (2018~2022) were thoroughly analyzed. Results: A total of 225 violations of the CSCA have been discovered at 165 corporations, with the violation rate accounting for approximately 27% of all business operators. In particular, 22% of the 165 violators (36 corporations) were discovered to have violated twice or more, and some business operators (6%) even violated in consecutive years. Non-compliance of facility inspection was the most frequent violation (45 cases, 20.1%), followed by non-reporting of important changes in the permitted matters (23 cases, 10.3%), non-completion of legal safety education (19 cases, 8.5%), failure to secure permission for modification in the permitted matters (18 cases, 8.0%), and failure to submit chemical transport plans (16 cases, 7.1%). Conclusions: Most of the violations could have been prevented if the field personnel had paid sufficient attention. Thus, it is fundamentally necessary to create an environment for spontaneous safety management for themselves and to strengthen individual capabilities.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.12-16
• /
• 2022

Currently, Induction welding is attracting attention as a non-contact, clean and fast welding process. However, since thermoplastic resins are not affected by electromagnetic fields, induction welding requires a heating element called a susceptor. Researches are being conducted with the aim of achieving high-quality bonding, however, the factor of a heating element is an issue, hence the need to set a standard. Specimen fabrication and testing are conducted according to ASTM D5868. In this study, we propose that the evaluation criteria be judged on the basis of three factors; the condition of the welded joint surface, void content, and lap shear strength. Since the adhesive surface to be welded melts and solidifies as it cools, rapid temperature changes can generate pores. In addition, if the heating is not uniform, it is difficult to expect the desire performance. Using PA6 (CF 30%) thermoplastic, susceptor fabrication, induction welding and performance verification were conducted.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.158-158
• /
• 2022

Ecological drought consequences have received a lot of attention in recent years. Thus, ecological drought was proposed as a new drought category to characterize the impact of drought on ecosystems. The current study used a unique drought index, the standardized supply-demand water index (SSDI), and a run theory to detect ecological drought occurrences and characteristics such as drought-affected area, drought severity, drought duration, drought frequency, and drought orientation in the Hwang River, an environmentally valuable region. Hence, to assess drought-prone areas, the bivariate probability and return period will be calculated using a two-dimensional joint copula. The core results show that (a) the Spatio-temporal characteristics of ecological drought were successfully recognized using the spatial and temporal identification approach; (b) in comparison to the SPEI meteorological drought index, the SSDI is more credible and can more readily and effectively capture the entire properties of ecological drought information; (c) the Hwang river had seen the most severe drought occurrences between the late 1990s and the mid-2020s, with 48.3 percent occurring before the twenty-first century; (d) Severe ecological drought occurrences occurred more frequently in most areas of the Hwang River (e) Only the drought duration and severity in the Hwang area were more responsive to temperature when temperatures rise around 1.1℃, the average drought duration and severity rise around 16 % and 26 %, respectively. This suggested that the Hwang River has been exposed to more severe heat stress in the twenty-first century. Thereupon droughts in the twenty-first century occurred with bigger affected regions, longer durations, higher frequency, and more intensity.

• (The) Research of the performance art and culture
• /
• no.38
• /
• pp.225-248
• /
• 2019

is a ritual song which is song in Mangmuk-gut of Hamgyeongdo. is known as it block sal(煞). The study on was done in comparison with . So it is necessary to discuss centering on , and to understand its ritual role with narrative. In this article, I have paid attention to the space of . The space is consisted of inside and outside the village. In the process of solving grudge of the deaths, I confirmed that the problem of the individual extends to the problem of the village. Although the problem is solved through the joint response of the villages, in the process the effect of the problem such as losing and sacrifice the members is in the whole village. So blocking Sal of the village is done for the complete solution. Furthermore, song in individual ritual, but it can be said that the function of the is extended to the role of the Maeul(village)-gut.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.4
• /
• pp.41-47
• /
• 2022

Ag sintering technologies have received great attention as it was applied to the inverter of Tesla's electric vehicle Model III. Ag sinter bonding technology has advantages in heat dissipation design as well as high-temperature stability due to the intrinsic properties of the material, so it is useful for practical use of SiC and GaN devices. This study was carried out to understand the sinter joining temperature effect on the robust Ag sintered joints in air without pressure within 10 min. Electroplated Ag finished Cu dies (3 mm × 3 mm × 2 mm) and substrates (10 mm × 10 mm × 2 mm) were introduced, respectively, and nano Ag paste was applied as a bonding material. The sinter joining process was performed without pressure in air with the bonding temperature as a variable of 175 ℃, 200 ℃, 225 ℃, and 250 ℃. As results, the bonding temperature of 175 ℃ caused 13.21 MPa of die shear strength, and when the bonding temperature was raised to 200 ℃, the bonding strength increased by 157% to 33.99 MPa. When the bonding temperature was increased to 225 ℃, the bonding strength of 46.54 MPa increased by about 37% compared to that of 200 ℃, and even at a bonding temperature of 250 ℃, the bonding strength exceeded 50 MPa. The bonding strength of Ag sinter joints was directly influenced by changes in the necking thickness and interfacial connection ratio. In addition, developments in the morphologies of the joint interface and porous structure have a significant effect on displacement. This study is systematically discussed on the relationship between processing temperatures and bonding strength of Ag sinter joints.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.1
• /
• pp.35-42
• /
• 2024

Recently, with the miniaturization and high integration of semiconductor chips, the bump bridge phenomenon caused by fine pitches is drawing attention as a problem. Accordingly, Cu pillar bump, which can minimize the bump bridge phenomenon, is widely applied in the semiconductor package industry for fine pitch applications. When exposed to a high-temperature environment, the thickness of the intermetallic compound (IMC) formed at the joint interface increases, and at the same time, Kirkendall void is formed and grown inside some IMC/Cu and IMC interfaces. Therefore, it is important to control the excessive growth of IMC and the formation and growth of Kirkendall voids because they weaken the mechanical reliability of the joints. Therefore, in this study, isothermal aging evaluation of Cu pillar bump joints with a CS (Cu+ Sn-1.8Ag Solder) structure was performed and the corresponding results was reported.

• Animal Bioscience
• /
• v.37 no.7
• /
• pp.1289-1302
• /
• 2024

Objective: There is a strong relationship between the content of beneficial fatty acids in milk and milk fat metabolic activity in the mammary gland. To improve milk quality, it is therefore necessary to study fatty acid metabolism in bovine mammary gland tissue. In adipose tissue, peroxisome proliferator-activated receptor gamma (PPARG), the core transcription factor, regulates the fatty acid metabolism gene network and determines fatty acid deposition. However, its regulatory effects on mammary gland fatty acid metabolism during lactation have rarely been reported. Methods: Transcriptome sequencing was performed during the prelactation period and the peak lactation period to examine mRNA expression. The significant upregulation of PPARG drew our attention and led us to conduct further research. Results: According to bioinformatics prediction, dual-luciferase reporter system detection, real-time quantitative reverse transcription polymerase chain reaction and Western blotting, miR-130a and miR-130b could directly target PPARG and inhibit its expression. Furthermore, triglyceride and oil red O staining proved that miR-130a and miR-130b inhibited milk fat metabolism in bovine mammary epithelial cells (BMECs), while PPARG promoted this metabolism. In addition, we also found that the coexpression of miR-130a and miR-130b significantly enhanced their ability to regulate milk fat metabolism. Conclusion: In conclusion, our findings indicated that miR-130a and miR-130b could target and repress PPARG and that they also have a functional superposition effect. miR-130a and miR-130b seem to synergistically regulate lipid catabolism via the control of PPARG in BMECs. In the long-term, these findings might be helpful in developing practical means to improve high-quality milk.

• Journal of the Korean Society of Radiology
• /
• v.14 no.2
• /
• pp.129-138
• /
• 2020

Due to the nature of the Rosenberg Method, the patient needs to maintain posture for a certain period of time, and the joint space is observed in various forms depending on the angle of knee flexion, which causes difficulties in examination. In order to solve these problems, Image quality was evaluated in order to evaluate the usefulness of the assistive device by making the assistive device itself. SNR and CNR analysis about the presence or absence of an assistive device using the extremity phantom and the angle of the assistive device itself were not statistically significant(p < 0.05). As a result of measuring the distance between the right and left edges of the medial condyle based on the presence or absence of an assist device, and the absence of assist device (96.00±40.6 mm) and presence of an assist device (134.86±17.68 mm) were statistically significant (p <0.05). To find the aLDFA relationship about the femur and tibia, we measured the right and left aLDFA based on the presence or absence of assist device. As a result, the absence of the right-side aLDFA assist device (74.63°±4.87) and the presence of assist device (79.64°±3.65) were statistically significant (p <0.05). The absence of the left-side aLDFA assist device (76.39°±4.62) and the presence of assist device (79.64°±3.65) were statistically significant (p < 0.05). but, As a result of measuring the distance of the overlapping parts of the right and left proximal tibiofibular joint and the lateral condyle, There were no statistically significant differences between the right and left sides. In conclusion, we confirmed that we can obtain Diagnostically valuable images with a constant knee-to-knee spacing using an assist device we self-created. In addition, we could learn through aLDFA relationship between femur and tibial that the smaller the angle, the more medial condyle overlaps with JSW, We also confirmed the significance by deriving similar values on the normal range values of aLDFA using assist devices. However, it is considered necessary to pay attention to internal and external rotations in order to obtain good quality images by evaluating the distance of overlapping parts between proximal tibiofibular joint and lateral condyle.

• Korean Journal of Labor Studies
• /
• v.24 no.2
• /
• pp.367-408
• /
• 2018

This study examines the features of globalization process in GM and Hyundai Motors, especially in the expansion into China auto market, through a joint venture(hereafter JV) research center. Due to the large scale market in China and the 50:50 JV, the two companies had to respond in some way to the Chinese government's request for localization of research and development functions, and their response affected the role of the JV research center. Even though the improvement in technological capability expected from the JV by the Chinese side did not appear well in the early stage in both JV, but relatively the Shanghai GM JV research center had a technological progress compared to the Beijing Hyundai JV research center. This paper explains the differences in the technical capabilities of the two JV research center, despite the same type of JV, as the difference between the status of the Chinese partner and the global strategy of the parent company. SAIC, a Chinese partner in Shanghai GM as a top-tier company, not only has been strongly demanding technology transfer from GM since the beginning of the JV, but has also made efforts to improve its own technical capabilities. Meanwhile, BAIC, a Chines partner in Beijing Hyundai as a mid-tier company, has not been strongly demanding technology transfer and lacked its own research base. Regarding the parent company's global strategy, although both companies controlled the core areas of research and development by their parent companies, GM actively considered using the Chinese RV to develop Chinese and emerging country vehicles. On the other hand, Hyundai Motors responded to the localization demand of the Chinese government while paying more attention to preventing technology leakage through its independent research center in China. The above discussion shows that the process of globalization of a company is a political process in which the global strategy of the parent company and the demands of the stakeholders surrounding the subsidiary are collided and compromised, rather than a process in which the harmony and cooperation between the parent company and its subsidiaries are smoothly achieved as the parent company's policies are unilaterally implemented.