• Journal of KIISE:Databases
• /
• v.35 no.4
• /
• pp.297-306
• /
• 2008

MJoin is proposed as an algorithm to join multiple data streams efficiently, whose characteristics are unpredictably changed. It extends a symmetric hash join to handle multiple data streams. Whenever a tuple arrives from a remote stream source, MJoin checks whether all of hash tables have matching tuples. However, when a join involves many data streams with low join selectivity, the performance of this checking process is significantly influenced by the checking order of hash tables. In this paper, we propose a BiHT-Join algorithm which extends MJoin to conduct this checking in a constant time regardless of a join order. BiHT-Join maintains a bit-vector which represents the existence of tuples in streams and decides a successful/unsuccessful join through comparing a bit-vector. Based on the bit-vector comparison, BiHT-Join can conduct a hash join only for successful joining tuples based on this decision. Our experimental results show that the proposed BiHT-Join provides better performance than MJoin in the processing of multiple streams.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.27-42
• /
• 2019

This paper tried a detailed approach to identify the correlation among basic elements that influenced the change of forms of the Po. To this end, the subjects were limited to the clothing from the 15th to the 18th century, which was found in the tombs of the period of Pyeonbokpo. The total number of excavated artifacts measured directly is 6 and other correctly described excavated artifacts for a total of 54 items. Per period and element, the types of collars and Seop were presented by classifying collars in 4 types, and Seop in 3 types. On the basis of the classification, the relics selected in this paper were analyzed considering the appearance, period, and rate per type of each element. The type and the change of forms of each element per period, with the focus on the appearance, were identified and the factors influencing the change of forms per element and the correlation between such factors were investigated. The representative type in the first period included dual collars, dual Seop and the representative type in the second period was characterized by a shawl collar and a dual Seop joining the pieces. The representative type in the third period was characterized by round collars and a short Seop. The elements determining the forms of Po, including collars and Seop, had a correlation to the lapse of time and had been systematically influencing each other. Furthermore, the overall change of form was caused due to the social functions as well as the supplementary function of keeping balance among the elements and accordingly, the change of forms was think characterized per period.

• International Journal of Korean Welding Society
• /
• v.2 no.2
• /
• pp.19-25
• /
• 2002

In recent years, techniques for micro-assembly with high repeatability under a scanning electron microscope (SEM) are required to construct highly functional micro-devices. Adhesion phenomenon is more significant for smaller objects, because adhesional force is proportional to size of the objects while gravitational force is proportional to the third power of it. It is also known that adhesional force between micro-objects exposed to Electron Beam irradiation of SEM increases with the elapsed time. Therefore, mechanical manipulation techniques using a needle-shaped tool by adhesional force are often adopted in basic researches where micro-objects are studied. These techniques, however, have not yet achieved the desired repeatability because many of these could not have been supported theoretically. Some techniques even need the process of trial-and-error. Thus, in this paper, mechanical and adhesional micro-manipulation are analyzed theoretically by introducing new physical factors, such as adhesional force and rolling-resistance, into the kinematic system consisting of a sphere, a needle-shaped tool, and a substrate. Through this analysis, they are revealed that how the micro-sphere behavior depends on the given conditions, and that it is possible to cause the fracture of the desired contact Interfaces selectively by controlling the force direction in which the tool-tip loads to the sphere. Based on the acquired knowledge, a mode diagram, which indicates the micro-sphere behavior for the given conditions, is designed. By referring to this mode diagram, the practical technique of the pick and place manipulation of a micro-sphere under an SEM by the selective interface fracture is proposed.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.4-4
• /
• 2009

Polycarbonate (PC) and Acrylonitrile Butadiene Styrene (ABS) was welded through a combination of a diode laser and CNC. Laser beam passed the transparent PC and was absorbed in an opaque ABS. Polymers were melted and welded by absorbed and conducted heat. Experiments were carried out by varying working distance from 44mm to 50mm for the focus spot diameter control, laser input power from 10W to 25W, and scanning speed from 100 to 400mm/min. The weld bead size and the specimen cross-section were analyzed, and tensile results were presented through the joint force measurement. With focus distance at 48mm, laser power with 20W, and welding speed at 300mm/min, experimental results showed the best welding quality which bead size was 3.75mm and the shear strength was $22.8N/mm^2$. Considering tensile strength of ABS is $43N/mm^2$, shear strength was sufficient to hold two materials. A single process was possible in CNC machining processes, surface processing, hole machining and welding. As a result, the process cycle time was reduced to 25%. Compared to a typical process, specimens were fabricated in a single process, with high precision. By combining two operations processes developed process gained 50% more efficiency.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.66-66
• /
• 2009

Various alloy system, such as Cu-Sn-Ti, Cu-Ag-Ti, and Ni-B-Cr-based alloy are used for the brazing of diamond grits. However, the problem of the adhesion strength between the diamond grits and the brazed alloy is presented. The adhesion strength between the diamond grits and the melting filler alloy is predicted by the contact angle, thereby, instead of diamond grit, the study on the wettability between the graphite and the brazing alloy has been indirectly executed. In this study, Cu-13Sn-12Ti filler alloy was manufactured, and the contact angles, the shear strengths and the interfacial area between the graphites(diamond grits) and braze matrix were investigated. The contact angle was decreased on increasing holding time and temperature. The results of shear strength of the graphite joints brazed filler alloys were observed that the joints applied Cu-13Sn-12Ti alloy at brazing temperature 940 $^{\circ}C$ was very sound condition indicating the shear tensile value of 23.8 MPa because of existing the widest carbide(TiC) reaction layers. The micrograph of wettability of the diamond grit brazed filler alloys were observed that the brazement applied Cu-13Sn-12Ti alloy at brazing temperature $990^{\circ}C$ was very sound condition because of existing a few TiC grains in the vicinity of the TiC layers.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.59-59
• /
• 2009

The influences of B and Si in the filler metals on microstructure and isothermal solidification during transient liquid-phase (TLP) bonding of a nitrogen-containing duplex stainless steel with MBF-30 (Ni-4.5wt.%Si-3.2wt.%B) and MBF-35 (Ni-7.3wt.%Si-2.2wt.%B), were studied at the temperature range of $1030-1090^{\circ}C$ with various times from 60 s to 3600 s under a vacuum of approximately $10^{-5}$ Torr. In case of the former, BN, $Ni_3B$ and $Ni_3Si$ precipitates were formed in the bonding region. BN and $Ni_3Si$ secondary phases were present in the joint for the latter case. The formation of $Ni_3B$ within the joint centerline is dependent on B content. The morphology of $Ni_3Si$ is dominated by Si concentration. A difference between the times for complete isothermal solidification obtained by the experiments and the conventional TLP bonding diffusion model was observed when using MBF-35. According to the simulated results, the isothermal solidification completion time for MBF-35 case was smaller than that in MBF-30. However, this experimental value obtained using MBF-35 was notably larger than that obtained using MBF-30. Isothermal solidification of liquid MBF-30 is controlled by the first isothermal solidification regime dependent on B diffusion model, whereas that of liquid MBF-35 experiences two isothermal solidification regimes and is mainly controlled by the second isothermal solidification dependent on Si diffusion model. In addition, only if Si content exceeds a critical value, the slower 2nd solidification regime will commence.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1347-1353
• /
• 2011

Friction stir welding (FSW) method has extensively been used in manufacturing methods because of the several advantages over conventional welding methods, such as better mechanical properties, reduced occurrence of joining defects, high material saving, and low production time, etc. The aim of this paper is to review the optimal FSW conditions using the previous experimental results and is to investigate the fatigue crack growth rate in three different zones, WM, HAZ and BM for FSWed Al7075-T651 aluminum plates. As far as our experiments are concerned, the optimal conditions are obtained as rotation speed, 800rpm and travelling speed, 0.5mm/sec. The fatigue crack growth rate showed strong dependency on three different zones WM, HAZ and BM, and crack driving force.

• Journal of Digital Contents Society
• /
• v.12 no.1
• /
• pp.133-139
• /
• 2011

Structured P2P (peer-to-peer) networks have received much attention in research communities and the industry. The data stored in structured P2P networks can be located in a log-scale time without using central severs. The link-structure of structured P2P networks should be maintained for keeping log-scale search performance of it. When nodes join or leave structured P2P networks frequently, some links become unavailable and search performance is degraded by these links. To sustain search performance of structured P2P networks, periodic link recovery scheme is generally used. However, when the link recovery period is short or long compared with node join and leave rates, it is possible that sufficient number of links are not restored or excessive messages are used after the link-structure is restored. We propose the adaptive link recovery determination algorithm to maintain the link-structure of structured P2P networks when the rates of node joining and leaving are changed dynamically. The simulation results show that the proposed algorithm can maintain similar QoS under various node leaving rates.

• Mycobiology
• /
• v.30 no.2
• /
• pp.82-87
• /
• 2002

Species of Phellinus were known to harmful fungi causing white pocket rot and severe plant disease such as canker or heartrot in living trees in the West, but some species have been used to traditional medicines in the Orient for a long time. In this study the partial D1-D2 nucleotide sequences of 28S ribosomal DNA from 13 Phellinus strains were determined and compared with the sequences of 21 strains obtained from GenBank database. According to the neighbor-joining(NJ) method comparing the sequence data the phylogenetic tree was constructed. The phylogenetic tree displayed the presence of four groups. Group I includes P. ferreus, P. gilvus and P. johnsonianus, Group II contains P. laevigatus, P. conchatus and P. tremulae, Group III possesses P. linteus, P. weirianus, P. baumii, P. rhabarbarinus and P. igniarius, and Group IV comprises P. pini, P. chrysoloma. P. linteus and P. baumii, which were used mainly in traditional medicine, belong to the same group, but exactly speaking both were split into two different subgroups. To detect P. linteus only, we developed the PCR primer, D12HR. The primer showed the specific amplification of P linteus, which is permitted to medicinal mushroom in the East. The results make a potential to be incorporated in a PCR identification system that could be used for the rapid identification of this species from its related species, P. linteus especially.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.12 no.1
• /
• pp.71-81
• /
• 2017

Objectives : It is important to develop a new Chuna manual therapy as a representative of Chuna manual therapy technique at the time of KSCMM's (Korean Society of Chuna manual medicine) joining a $F{\acute{e}}d{\acute{e}}ration$ Internationale de $M{\acute{e}}decine$ Manuelle (FIMM). Therefore, Sunu manual therapy (SMT) will be introduced as a purely new Chuna manual therapy. Main subject : Sunu manual therapy (SMT) was discovered about two decade ago by a Korean Medicine doctor who wanted to develop a new manual therapy to treat a internal disease. It is very important to make the best use of four powers such as a compression force, a torsion force, a bending force, a tension force using a resonance principle and to experience a feeling of spine axis. SMT is different from Chiropractic technique and Osteopathy technique, in that SMT could treat so many disease using only one technique, but other manual therapy could utilize so many technique to treat only one disease. Discussion : Because SMT utilize a power of a moving in silience, it will take several years to totally master a SMT which will make a patient and a doctor experience a feeling of spine axis. As a feeling of spine axis is deeper, a nerve could be excited and treated by a SMT. Also as a feeling of spine axis is shallower, a muscle could be excied and treated by a SMT. Conclusions : SMT could be classed as a craniosacral chuna therapy or visceral chuna therapy to treat a internal disease considering SMT's action and purpose.