• 한국군사과학기술학회지
• /
• 제19권5호
• /
• pp.613-617
• /
• 2016

Development-concerned parties, business managers and test evaluators have experienced conflicts among themselves due to the absence of standardized criteria for military electro-optical(EO) and infrared(IR) devices in test evaluation planning and evaluation phases. Therefore, establishment of objectified test and evaluation criteria for EO/IR devices is required. This paper applies South Korea's weather measurement average of minimum 15 km for visibility range, 3 bar from Johnson criteria for EO device and 4 bar from NATO's STANAG-4347 for IR device for target type, and 50 % probability for evaluation criteria, respectively. Based upon these criteria, this paper will establish suitable criteria that are improved for development weapon system in consideration of required capability of demanding forces and field environment.

• 대한조선학회논문집
• /
• 제49권4호
• /
• pp.281-286
• /
• 2012

Single frame structures with notches were fractured by applying drop impact loadings at room temperature and low temperature. Johnson-Cook shear failure model has been employed to simulate the fractured single frame structures. Through several numerical analyses, material constants for Johnson-Cook shear failure model have been found producing the cracks resulted from experiments. Fracture strain-stress triaxiality curves at both room temperature and low temperature are presented based on the extracted material constants. It is expected that the fracture strain-stress triaxiality curves can offer objective fracture criteria for the assessment of structural fractures of polar class vessel structures fabricated from DH36 steels. The fracture experiments of single frame structures revealed that the structure on low temperature condition fractures at much lower strain than that on room temperature condition despite the same stress states at both temperatures. In conclusion, the material properties on low temperature condition are essential to estimate the fracture characteristics of steel structures operated in the Northern Sea Route.

• Journal of applied mathematics & informatics
• /
• 제18권1_2호
• /
• pp.383-391
• /
• 2005

The paper is devoted to some flow shop scheduling problems, where job processing times are defined by functions dependent on their positions in the schedule. An example is constructed to show that the classical Johnson's rule is not the optimal solution for two different models of the two-machine flow shop scheduling to minimize makespan. In order to solve the makespan minimization problem in the two-machine flow shop scheduling, we suggest Johnson's rule as a heuristic algorithm, for which the worst-case bound is calculated. We find polynomial time solutions to some special cases of the considered problems for the following optimization criteria: the weighted sum of completion times and maximum lateness. Some furthermore extensions of the problems are also shown.

• 한국해양공학회지
• /
• 제25권2호
• /
• pp.92-100
• /
• 2011

The main goal of this paper is to provide the theoretical background for the fracture phenomena in marine structural steels. In this paper, various fracture criteria are theoretically investigated: shear failure criteria with constant failure strain and stress triaxiality-dependent failure strain (piecewise failure and Johnson-Cook criteria), forming limit curve failure criterion, micromechanical porosity failure criterion, and continuum damage mechanics failure criterion. It is obvious that stress triaxiality is a very important index to determine the failure phenomenon for ductile materials. Assuming a piecewise failure strain curve as a function of stress triaxiality, the numerical results coincide well with the test results for smooth and notched specimens, where low and high stress triaxialities are observed. Therefore, it is proved that a failure criterion with reliable material constants presents a plastic deformation process, as well as fracture initiation and evolution.

• 한국지리정보학회지
• /
• 제13권1호
• /
• pp.101-113
• /
• 2010

최근에 발생하는 강우양상은 강우일수는 감소하고, 강우강도는 증가해 홍수발생 빈도 역시 증가하는 추세이다. 이를 반영하기 위한 기존의 방법은 수공구조물의 설계홍수량을 산정할 때 가능최대강우량을 도입하거나, 설계빈도를 높이는 등의 확정론적 방법에 의존한다. 그러나 이렇게 설계기준을 상향 조정한 경우, 설계빈도의 강우가 발생하지 않으면 수공구조물의 경제성 측면에서 문제가 될 소지가 있다. 또한 수공구조물의 규모가 클수록 인근 주민과의 마찰이 커지고, 환경 문제의 발생 역시 고려하지 않을 수 없다. 이에 따라 설계빈도의 무조건적인 상향조정에 의존하기보다 추계학적 방법을 도입한 수문량의 확충 및 매개변수의 불확실성을 수공구조물 설계 시에 고려하기 위한 연구가 활발히 진행되고 있다. 본 연구에서는 강우발생의 불확실성을 반영하여 제내지에서의 침수범위를 GIS상에서 검토하였다. 이를 위해 log-ratio 방법, Johnson 시스템, 직교변환을 활용한 다변량 Monte Carlo 기법으로 추계학적 시간에 따른 강우변동을 생성하였다. 생성된 강우변동 결과를 토대로 수문분석, 홍수위 분석 등을 실시하고 FLUMEN 모형을 적용하여 해당유역에 대한 홍수범람시 침수범위를 산정하였다. 본 연구결과는 실제 강우의 불확실성을 반영하고 있어 시 공간적 강우특성이 반영된 유역별 주민대피지도, 홍수위험지도 등을 제작하는데 활용될 수 있을 것으로 판단된다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권1호
• /
• pp.50-63
• /
• 2015

Explosive bolts are one of pyrotechnic release devices, which are highly reliable and efficient for a built-in release. Among them, ridge-cut explosive bolts which utilize shock wave generated by detonation to separate bolt body produce minimal fragments, little swelling and clean breaks. In this study, separation phenomena of ridge-cut explosive bolts or ridge-cut mechanism are computationally analyzed using Hydrocodes. To analyze separation mechanism of ridge-cut explosive bolts, fluid-structure interactions with complex material modeling are essential. For modeling of high explosives (RDX and PETN), Euler elements with Jones-Wilkins-Lee E.O.S. are utilized. For Lagrange elements of bolt body structures, shock E.O.S., Johnson-Cook strength model, and principal stress failure criteria are used. From the computational analysis of the author's explosive bolt model, computational analysis framework is verified and perfected with tuned failure criteria. Practical design improvements are also suggested based on a parametric study. Some design parameters, such as explosive weights, ridge angle, and ridge position, are chosen that might affect the separation reliability; and analysis is carried out for several designs. The results of this study provide useful information to avoid unnecessary separation experiments related with design parameters.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2386-2394
• /
• 2022

In this paper, smooth and notched bar tensile tests of austenitic stainless steel 304 are performed, covering four different multi-axial stress states and six different strain rate conditions, to investigate the effect of the stress triaxiality and strain rate on fracture strain. Test data show that the measured true fracture strain tends to decrease with increasing stress triaxiality and strain rate. The test data are then quantified using the Johnson-Cook (J-C) fracture strain model incorporating combined effects of the stress triaxiality and strain rate. The determined J-C model can predict true fracture strain overall conservatively with the difference less than 20%. The conservatism in the strain-based acceptance criteria in ASME B&PV Code, Section III, Appendix FF is also discussed.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.594-609
• /
• 1998

In this dissertation, a new process capability index $C_{psk}$ is introduced for non-normal process. The Pearson curve and the Johnson curve are selected for capability index calculation and data modeling the normal-based index $C_{psk}$ is used as the model for non-normal process. A significant result of this research find that the ranking of the seven indices, $C_p,\;C_{pk},\;C_{pm},\;C^{\ast}_{pm},\;C_{pmk},\;C_s,\;C_{psk}$ in terms of sensitivity to departure of the process median from the target value T=M from the most sensitive one up to the least sensitive are $C_{psk},\;C_{s},\;C_{pmk},\;C^{\ast}_{pm},\;C_{pm},\;C_{pk},\;C_p$. i.e, By the criteria adopted for evaluation of PCI's $C_{psk}$ is the most sensitive to the departure of the process median from target and $C_p$ is least

• 전기의세계
• /
• 제9권
• /
• pp.4-10
• /
• 1962

Relay Servo제어계의 특이한 성질의 하나로, 다른 비선형계에섣 그렇지만 외부의 동작에 의한 것이 아니고, 제어계 자체내의 조건에서 계속적으로 주기적운동, 즉 자려주기진동(Sustained Oscillation)이 발생하는 경우가 있다. 제어계가 자려진동의 상태에 있을 때 그 진폭 및 각주파수는 각 부분의 요소에 의하여 결정되고 고유한 값을 가지게 된다. 이러한 상태는 선형제어계의 입장에서 보며는 불안정상태이나, Relay제어계에서는 이 주기진동이 제어량의 일정목표치에 대한 비율이 미리 규정지은 요구조건에 비하여 실제상 허용할 수 있는 정도면 제어계는 안정하다고 할 수 있다. Relay Servo계의 안정, 불안정은 Describing함수의 방법에 의하여 Nyquist, Attnuation-phase Margin Criteria를 사용하여 Kochenburger, Johnson의 연구에서 규정지었다. Relay-Servo자려진동상태는 제어계의 Gain정수 중에서도 그 종류에 따라 각주파수 및 진폭에 미치는 영향이 달라진다. 본문은 위에 설명한 상태를 알아내기 위하여 간단한 Raly위치제어계를 구성하고 Gain정수를 변화시키면서 자려진동의 각주파수 및 진폭의 변화를 계산하고 기록계의 측정치와 비교검토하고자 한다.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.259-268
• /
• 2007

In a very competitive construction business environment there is a need to measure and manage business performance across a wider spectrum of business success criteria. The Balanced Scorecard (BSC) and Triple Bottom Line (TBL) reporting concepts are emerging as champions in the race for sustainable business success. The construction business organisations are often judged based on their financial performance as well as wider performance. This paper aims at developing a universally accepted tool for assessing contractors' wider business performance in the construction industry. A prototype of web-based business performance measurement system has been developed to help contractors assess their own performance aimed at uplifting their performance. The consultants/clients can also use the tool to measure contractors' performance in a value-based contractor selection. The system was developed based on the research conducted among 63 senior construction professionals and therefore further research with the participation of a large number of managers across different countries and also an upgrade of the system will be required.