Abstract
Recently actual rainfall pattern is decreasing rainy days and increasing in rainfall intensity and the frequency of flood occurrence is also increased. To consider recent situation, Engineers use deterministic methods like a PMP(Probable Maximum Precipitation). If design storm wouldn't occur, increasing of design criteria is extravagant. In addition, the biggest structure cause trouble with residents and environmental problem. And then it is necessary to study considering probability of rainfall parameter in each sub-basin for design of water structure. In this study, stochastic rainfall patterns are generated by using log-ratio method, Johnson system and multivariate Monte Carlo simulation. Using the stochastic rainfall patterns, hydrological analysis, hydraulic analysis and 2nd flooding analysis were performed based on GIS for their applicability. The results of simulations are similar to the actual damage area so the methodology of this study should be used about making a flood risk map or regidental shunting rout map against the region.
최근에 발생하는 강우양상은 강우일수는 감소하고, 강우강도는 증가해 홍수발생 빈도 역시 증가하는 추세이다. 이를 반영하기 위한 기존의 방법은 수공구조물의 설계홍수량을 산정할 때 가능최대강우량을 도입하거나, 설계빈도를 높이는 등의 확정론적 방법에 의존한다. 그러나 이렇게 설계기준을 상향 조정한 경우, 설계빈도의 강우가 발생하지 않으면 수공구조물의 경제성 측면에서 문제가 될 소지가 있다. 또한 수공구조물의 규모가 클수록 인근 주민과의 마찰이 커지고, 환경 문제의 발생 역시 고려하지 않을 수 없다. 이에 따라 설계빈도의 무조건적인 상향조정에 의존하기보다 추계학적 방법을 도입한 수문량의 확충 및 매개변수의 불확실성을 수공구조물 설계 시에 고려하기 위한 연구가 활발히 진행되고 있다. 본 연구에서는 강우발생의 불확실성을 반영하여 제내지에서의 침수범위를 GIS상에서 검토하였다. 이를 위해 log-ratio 방법, Johnson 시스템, 직교변환을 활용한 다변량 Monte Carlo 기법으로 추계학적 시간에 따른 강우변동을 생성하였다. 생성된 강우변동 결과를 토대로 수문분석, 홍수위 분석 등을 실시하고 FLUMEN 모형을 적용하여 해당유역에 대한 홍수범람시 침수범위를 산정하였다. 본 연구결과는 실제 강우의 불확실성을 반영하고 있어 시 공간적 강우특성이 반영된 유역별 주민대피지도, 홍수위험지도 등을 제작하는데 활용될 수 있을 것으로 판단된다.