• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.4
• /
• pp.88-97
• /
• 1989

This paper proposes an efficient switch-box router which consists of two parts ; greedy poly-jog router and via minimizer. The greedy switch-box router of Luk, routes not only metal wires at horizontal tracks and poly-silicon wires at vertical tracks but also poly-siliocon wires ar horizontal tracks if necessary. The via minimizer reduces the number of vias and the wire length by fipping of each corner, parallel moving of wire segment, transformation metal into poly-silicon, and transformation poly-silicon into metal. The result is generated through the column-wise scan across the routing region. The expected time complexity is O(M(Nnet)). Where M, N, and Nnet are respectively the number of columns, rows, and nets in the routing region.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.91-96
• /
• 2015

In this study, we performed a study on prevention of the escape hoist heavy objects on the basis of the case of a disaster occurring during crane operations. A safety hook of the automatic fastening and coupling method by the conventional coupling method, the weight of the outside consisting of a combination of a safety ring structure was designed and manufactured. The main mechanism three-dimensional detail design and structural analysis confirmed the structure and stability of small strain than the allowable stress of the Safety Hook with X-jog through. Safety factor was confirmed to represent the average 1.5 to 1.2 higher than the safety factor to be considered in the general design structure. Therefore, Safety Hook and X-jog in the present study is to be operated upon structural stability is a structure attached to the hoist and crane are considered sufficient.

• Journal of Society of Preventive Korean Medicine
• /
• v.4 no.2
• /
• pp.214-234
• /
• 2000

This study was carried to identify whether acupuncture of several acupuncture points can affect the brain and to observe which aspects appear in EEG mapping, using electroencephalography. Those results are as follows ; 1. The pattern of resting computerized EEG map in intact human is appered normal 2. Each Acupuncture in Kwan Weon or Jog Sam Ri meridian points bring about the increase in $\theta,\;\alpha-wave$ activity and at various area of the cerebrium and the decrease in $\delta,\;\beta-wave$ activity. It strands to reason that brain function is elevated On the other hand , synchronous acupuncture bring about the decrease of brain function in view of the decrease of $\delta,\;\theta-wave$ activity at frontal area, and the unstable brain state in view of the increase of $\beta-wave$ activity. 3. Acupuncture in Hyeon Jong meridian point bring about the increase of $\delta,\;\theta-wave$ activity at frontal area and $\beta-wave$ activity at temporal area. From these we deduce that brain function is declined and brain is unstable. Synchronous acupuncture with other meridian points reversly showed that brain function is elevated. 4. Synchronous acupuncture in Kwan Weon , Jog Sam Ri, Hyeon Jong bring about the decrease of the brain function and the unstable brain state, showing the pattern of increased $\delta,\;\theta-wave$ activity at frontal, parietal area, and increased $\beta-wave$ activity at temporal area.

• 건축구조
• /
• v.9 no.2
• /
• pp.30-33
• /
• 2002

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.7
• /
• pp.592-598
• /
• 2013

In this paper, a small, lightweight smartphone-controlled riding robot is developed. Also, in this study, a smartphone with a jog shuttle mode for consideration of user convenience is proposed to make a small, lightweight riding robot. As well, a compass sensor is used to compensate for the mechanical characteristics of motors mounted on the riding robot. The riding robot is controlled by the interface of a drag-based jog shuttle in the smartphone, instead of a mechanical controller. For a personal riding robot, if the smartphone is used as a controller instead of a handle or a pole, it reduces its size, weight, and cost to a great extent. Thus, the riding robot can be used in indoor spaces such as offices for moving or a train or bus station and an airport for scouting, or hospital for disabilities. Experimental results show that the riding robot is easily and conveniently controlled by the proposed smartphone interface based on Android.

• Journal of the Korean Ceramic Society
• /
• v.36 no.7
• /
• pp.711-717
• /
• 1999

Biaxial fracture behavior of alumina specimens with the diameter of 20mm and four kinds of thickness of 1.9, 2.3, 2.6 and 2.8mm was studied by the ball-on-3-ball test and the fracture results were analyzed by he analysis of variance (ANOCA), The strength measured with the down speed prescribed in ASTM showed that the measured strength was not dependent on the thickness of the specimens. Equivalent radius and crack-braching number were observed to increase lineraly with the thickness of the specimens. The jog direction was observed to study the effect of grinding direction on surface flaws. It is though that the surface finishing with #600 grit diamond wheel did not affect the surface flaws of the specimens.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.52-60
• /
• 1997

This paper proposes the effective method of the software based motion control by using lenear, exponential and bell type discrete filters for acceleration and deceleration of servo motors. Recursive filters are designed in discrete time domain which can reduce computation time and vibration of motors due to load disturbance. Also it deals with the method which decides the time constants of filters when a machine tool is driven at rapid, cutting and jog feedrate. Validity of the proposed method is verified by corner cutting experiments.

• 도로교통
• /
• s.93
• /
• pp.69-74
• /
• 2003

균열성 암반이나 강도가 부족한 지반을 굴착할 때, 그들의 개량을 목적으로 "주입공법(Grouting)"이 채택된다. 최근, 이 주입공법으로 경사진 건물이나 구조물을 복구하는 공법이 개발되었다. 이 공법은 Jacking of Grout(JOG공법)로 이름이 붙여져, 한신 아와지 대지진 재해나 대만의 집집지진으로 기울어진 빌딩과 건물에서 암거까지 100건 이상의 현장에서 이들의 복구에 실적을 올려 왔다. 여기서는 이 신기술의 원리와 적용사례를 소개한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.533-534
• /
• 2010

Fiber optic sensor has bee widely used in the industrial applications. For the application of acoustic detection of the high voltage electric transformer Sagnac interferometer can be used. In this paper several different materials of mandrel were used in the fiber sensor array. Based on the transformer oil fiber optic sensor is more sensitive than in the air.

• Proceedings of the KAIS Fall Conference
• /
• 2002.11a
• /
• pp.201-204
• /
• 2002

Overlay margin 확보를 위한 oversizing과, design rule checking, jog filtering를 통하여 side-lobe를 추출하였다. 이렇게 추출한 side-lobe를 extent하고, Cr pattern을 정의하여 side-lobe 현상을 해결할 수 있었다. 하지만 이 방법은 mask제조 공정이 복잡하므로 Cr shield방식의 단점인 복잡한 mask제작공정과 구조를 단순화하기 위하여 scattering bar를 이용하였다. 따라서, scattering bar를 삽입하기 위한 rule을 생성하여 metal layer에 적용하고 aerial image simulation을 통해 side-lobe 현상이 억제되었음을 확인하였다. 그리고 앞에서와는 반대로 background clear의 경우에 발생하는 side-lobe에 scattering bar를 적용하여 억제됨을 확인하였다.