• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.1-12
• /
• 2019

The purpose of this study is to enhance the seismic performance of exposed column-base plate weak-axis connections for small-sized steel buildings. According to the site inspection for the small-sized building construction, the arbitrary connection details in steel buildings have been applied at the job site, which is considered to be insufficient to guarantee structural safety and stability considering the increased seismic risk in Korea. Therefore, a series of test programs had been done to develop enhanced connection details in order to ensue the adequate seismic stability and safety of small-sized steel buildings. From the test results, It was found that the exposed column-base plate weak-axis connections commonly used in Korea shows very poor seismic behavior due to the "Rocking" phenomena caused by the residual plastic deformation of anchor bolts between anchor plate and concrete. A series of hysteretic tests for finding that solution were conducted to reduce the "Rocking" phenomena of the column-base plate connections, and local buckling of webs in H-column. Finally the enhanced stable seismic behavior was obtained by reinforcing at least 8 anchor bolts with good bonding strength and stiffeners to the webs in H-column.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.441-447
• /
• 2021

Construction sites are complex and dangerous because heavy equipment and workers perform various operations simultaneously within limited working areas. Solitary works of heavy equipment in complex job sites can cause fatal accidents, and thus they should interact with spotters and obtain information about surrounding environments during operations. Recently, many computer vision technologies have been developed to automatically monitor construction equipment and detect their interactions with other resources. However, previous methods did not take into account the interactions between equipment and spotters, which is crucial for identifying solitary works of heavy equipment. To address the drawback, this research develops a computer vision-based solitary work detection model that considers interactive operations between heavy equipment and spotters. To validate the proposed model, the research team performed experiments using image data collected from actual construction sites. The results showed that the model was able to detect workers and equipment with 83.4 % accuracy, classify workers and spotters with 84.2 % accuracy, and analyze the equipment-to-spotter interactions with 95.1 % accuracy. The findings of this study can be used to automate manual operation monitoring of heavy equipment and reduce the time and costs required for on-site safety management.

• Knowledge Management Research
• /
• v.24 no.4
• /
• pp.23-42
• /
• 2023

This study originated from recognition of importance of firefighters' decision-making in fire response, coupled with existing gap in research. By utilizing Q-methodology, the study aimed to categorize firefighters' subjectivity in fire response decision-making. Through this categorization, the study sought to highlight insights into the current technological and data limitations, as well as potential directions for future R&D in the field of firefighting. The findings of the study revealed that firefighters' subjectivity could be classified into three factors: "emphasis on direct information related to rescue," "emphasis on information related to the target property," and "emphasis on information related to command and coordination." The study theoretically confirmed that the subjectivity of firefighters' decision-making in fire response is partially influenced by their experiences and job. Additionally, the study's significance lay in its approach of collecting specific decision-making factors in fire response, moving beyond general theoretical models. Furthermore, from a policy perspective, the typification of decision-making factors contributed to connecting the identified data-based administrative needs from prior studies. Insights from the study emphasized the importance of leveraging on-site experience in Korea to aid decision-making, calling for the development of equipment and data collection methods that can rapidly and accurately assess on-site conditions.

• Nuclear Engineering and Technology
• /
• v.44 no.3
• /
• pp.225-236
• /
• 2012

The Fukushima-Daiichi accident shook the world, as a well-known plant design, the General Electric BWR Mark I, was heavily damaged in the tsunami, which followed the Great Japanese Earthquake of 11 March 2011. Plant safety functions were lost and, as both AC and DC failed, manoeuvrability of the plants at the site virtually came to a full stop. The traditional system of Emergency Operating Procedures (EOPs) and Severe Accident Management Guidelines (SAMG) failed to protect core and containment, and severe core damage resulted, followed by devastating hydrogen explosions and, finally, considerable radioactive releases. The root cause may not only have been that the design against tsunamis was incorrect, but that the defence against accidents in most power plants is based on traditional assumptions, such as Large Break LOCA as the limiting event, whereas there is no engineered design against severe accidents in most plants. Accidents beyond the licensed design basis have hardly been considered in the various designs, and if they were included, they often were not classified for their safety role, as most system safety classifications considered only design basis accidents. It is, hence, time to again consider the Design Basis Accident, and ask ourselves whether the time has not come to consider engineered safety functions to mitigate core damage accidents. Associated is a proper classification of those systems that do the job. Also associated are safety criteria, which so far are only related to 'public health and safety'; in reality, nuclear accidents cause few casualties, but create immense economical and societal effects-for which there are no criteria to be met. Severe accidents create an environment far surpassing the imagination of those who developed EOPs and SAMG, most of which was developed after Three Mile Island - an accident where all was still in place, except the insight in the event was lost. It requires fundamental changes in our present safety approach and safety thinking and, hence, also in our EOPs and SAMG, in order to prevent future 'Fukushimas'.

• Safety and Health at Work
• /
• v.6 no.2
• /
• pp.120-127
• /
• 2015

Background: Musculoskeletal pain (MSP) is a common and disabling problem among carpet weavers and is linked to physical and psychosocial factors of work. This study aimed to determine the prevalence of MSP, its psychosocial risk factors, and association of pain in each pair of anatomical sites among carpet weavers. Methods: A cross-sectional study was performed among 546 hand-woven carpet weavers in rural small-scale workshops of Iran. Data were collected by using parts of a standardized CUPID (Cultural and Psychosocial Influences on Disability) questionnaire focused on MSP in 10 body sites, including the low-back, neck, both right and left shoulders, elbows, wrists/hands, individual, physical and psychosocial risk factors. Statistical analysis was performed applying logistic regression models. Results: Prevalence of MSP in at least one body sitewas 51.7% over the past month. The most common sites were low back and right shoulder pain 27.4% and 20.1%, respectively. A significant difference was found between the mean number of painful anatomical sites and the level of education, age, physical loading at work, time pressure, lack of support, and job dissatisfaction. In pairwise comparisons, strongest association was found between pain in each bilateral anatomical site (odds ratio = 11.6-35.3; p < 0.001). Conclusion: In home-based workshops of carpet weaving, psychosocial factors and physical loading were associated with MSP. This finding is consistent with studies conducted among other jobs. Considering the preventive programs, the same amount of attention should be paid to psychosocial risk factors and physical loading. Also, further longitudinal studies are needed to investigate the relationship of psychological factors.

• Korean Institute of Interior Design Journal
• /
• v.20 no.6
• /
• pp.331-339
• /
• 2011

The purpose of this study was to examine wandering behaviors of the elderly with dementia at elderly care facilities, thus finding out the current status of supportability and safety of wandering space for facility residents and looking into the convenience of management for the control and Support of the elderly with dementia in wandering space, from the aspect of managers. Study methods consisted of literature examination, on-site assessment and investigation, observation and questionnaire survey. And via a questionnaire survey of facility workers at study subject facilities, the current status and facility workers' perception of wandering space and their job-satisfaction were examined. Collected data of 133 respondents were used for analysis. Data were processed with the SPSS 18.0 program, and such analytic techniques as frequency, percentage, mean, multiple response analysis, chi-square test and correlation analysis were carried out. The problems of physical environment of wandering space for the elderly with dementia: First, it is urgent to establish wandering space. Second, thoughtlessly installed chairs in the corridor impeded wandering behaviors. Third, the grips installed in the corridor space were irregular, thus causing inconvenience for wandering behaviors. Thus making residents' use of it difficult. In order to improve these problems, it is necessary to newly or additionally establish wandering space and modify the location of chairs or establish alcoves, thus reducing impedimentary elements for wandering behaviors. Providing a proper wandering space is important for facility residents. And it is also important for facility workers to manage facility residents.

• International Commerce and Information Review
• /
• v.17 no.2
• /
• pp.307-327
• /
• 2015

Trade education methods that combine practical knowledge and on-site job training have significantly contributed in improving abilities of trade experts. For instance, GTEP and LINC have contributed to a substantial expansion of SME export performane. Moreover, students' cooperation experience have led to employment outcomes as SMEs can employ customized trade workers. I have conducted a survey to 100 students about university-industry collaboration. Results show that ICT skills and foreign language ability are the highest required conditions of employment while production and technology knowledge are the lowest. Furthermore, 50 companies operating in foreign markets responded that through industry-university cooperation, capabilities of university graduates have improved and trade education cooperation scheme is a success.

• Journal of radiological science and technology
• /
• v.11 no.1
• /
• pp.43-62
• /
• 1988

The purpose of this study is to analyze the problems of the Current Curriculum of Radiologic Technology Department in Junior College, try to find a future solution of the education of Radiologic Technology and a reform measure, and suggest a new substantial model. So this study refered to sundary records, posed a question by papers, made a reform measure of curriculum on the basis of the results, examined it throughly by discussion with the related professors and the industrials figures, and decided a new model. The characteristics of the reform measure reflected in the new model are as follows; 1. It increased the numbers of credits like 94 or 95 ones, to positively accept a developing medical technique and modern science. 2. It set up various general studies and offered a free selection. 3. It closely related majors and their credits to the national examination of lisence and the task of industrial job site. 4. It kept the balance between the periods of lecture, practice, training and their credits. 5, It reinforced the subjects of fundamental medical science such as Introduction to Medicine, Pathology, Biochemistry, Patient Care, etc. 6. It newly established Clinical Trainings as a regular education course. 7. It newly established Introduction to Computer Science, Ultrasonography and Magenetic Resonance Imaging, to cope with the development of the future medical technique. 8. It newly established Humanism in Medicine as a regular education course. 9. It changed the names of subjects resonably.

• International Journal of Ocean System Engineering
• /
• v.2 no.4
• /
• pp.209-213
• /
• 2012

Recently, the fuel using in the diesel engines of marine ships has been changed to a low quality of heavy oil because of the steady increase in the price of oil. Therefore, the wear and corrosion in all parts of the engine such as the cylinder liner, piston crown, and spindle and seat ring of exhaust valves has correspondingly increased. The repair welding of a piston crown is a unique method for prolonging its lifetime from an economic point of view. In this case, filler metals with a high corrosion and wear resistance are mainly being used for repair welding. However, often at a job site on a ship, a piston crown is actually welded with mild filler metals. Therefore, in this study, mild filler metals such as CSF350H, E8000B2, and 435 were welded to SS401 steel as the base metal, and the corrosion properties of the weld metals with and without post weld heat treatment were investigated using some electrochemical methods in a 0.1% $H_2SO_4$ solution. The weld metal welded with CSF350H filler metal exhibited the best corrosion resistance among these filler metals, irrespective of the heat treatment. However, the weld metal zones of the E8000B2 and 435 filler metals exhibited better and worse corrosion resistance with the heat treatment, respectively. As a result, it is suggested that in the case of repair welding with CSF350H and 435 filler metals, no heat treatment is advisable, while heat treatment is desirable if E8000B2filler metal is used with repair welding.

• Convergence Security Journal
• /
• v.16 no.2
• /
• pp.35-53
• /
• 2016

For the development of national competency standards to successfully perform the duties by systemizing the contents of education and training such as knowledge technology grounding required to perform the duties in the industrial field, the necessity has been raised in that it can solve the time and cost of re-investment through retraining and train high-quality human resources required in the industrial field. For the development of the education and training process with a focus on duty performers for the security sector classifying work and duties into 1:1 among sub-categories based on the NCS classification system, this study enhances the site suitability of security sector education and proposes the development of the practical education and training process required by the industry by using NCS development manual and DACUM technique, the worker-centered job analysis considering 'correlation' with the actual work, 'applicability' of progress and 'efficiency' for costs and time.