• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.28.4-29
• /
• 2008

The aim of the test is to provide an experimental basis to validate the prediction of the FEM for high frequency jitter analysis due to reaction wheel. The principle is to measure structural transfer functions between the input disturbances at RWA base plate and the accelerations near the end tips of payload, in a configuration close to the operational model. The spacecraft shall have to be suspended, in order to be representative of on-orbit boundary conditions. The results of the test shall be compared to the output of the FEM analysis, and if needed, local upgrades of the FEM and/or margin policy shall be defined in order to guarantee a good test/FEM consistency. Test results were compared with the transfer functions of the FEM, which is globally tuned based on the results of vibration test and consequently have lower damping coefficients values than 1% in the frequency range of 60~200Hz. The damping coefficients estimated from the figures of FRF test results are different from the theoretical FEM, but the magnitude trend of FRF of the test results is somewhat similar with the analytical, it is expected that the overall jitter effect of final estimation is nearly same with the preliminary analysis result in which the damping coefficients were assumed to be 1% for all modes in FEM.

• Phonetics and Speech Sciences
• /
• v.10 no.4
• /
• pp.147-154
• /
• 2018

Wet voice quality (WVQ) is a characteristic that appears after swallowing. Although the concept is accepted by many clinicians worldwide, it is nevertheless ambiguous. In this study, we investigated WVQ in patients with swallowing disorders using acoustic analysis. A total of 106 patients diagnosed with penetration-aspiration by the videofluoroscopic swallowing study (VFSS) were recruited. A voice recording of vowel /a/ was conducted before and after the VFSS, and an acoustic analysis was then performed using PRAAT. Voice after VFSS was used for a perceptual judgment and divided into two groups: the Wet group (48 patients) and the Non-wet group (58 patients). At the post-VFSS stage, the two groups displayed significant differences in many acoustic parameters including F0_SD, Jitter, RAP, Shimmer, APQ, HNR, NHR, FUF, DVB, and CPP. The parameter affecting judging wetness resulted into Jitter and NHR by the logistic regression test. At the pre-VFSS stage, the two groups differed significantly in many acoustic parameters including Intensity, Jitter, RAP, Shimmer, NHR, FUF, DVB, and CPP. Both pre-and post-VFSS, the mean values of all significant parameters, except Intensity, HNR, and CPP, were higher in the Wet group. According to pre-and post-VFSS, the two groups displayed interactions in many parameters (Intensity, F0_SD, Jitter, RAP, Shimmer, APQ, HNR, NHR, FUF, DVB, and CPP). In particular, Intensity increased in both groups after the VFSS, although the increase in the Non-wet group was greater. Based on these results, it was conjectured that the WVQ after swallowing resulted from the secretion effect of the mucous membrane due to the dry laryngeal characteristic of elderly patients, rather than aspiration resulting in food on the vocal cords.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.6
• /
• pp.1271-1278
• /
• 2020

Deep learning-based profiling side-channel analysis is a powerful analysis method that utilizes the neural network to profile the relationship between the side-channel information and the intermediate value. Since the neural network interprets each point of the signal in a different dimension, jitter makes it much hard that the neural network with dimension-wise weights learns the relationship. This paper shows that replacing the fully-connected layer of the traditional CNN (Convolutional Neural Network) with global average pooling (GAP) allows us to design the inherently robust neural network inherently for jitter. We experimented with the ChipWhisperer-Lite board to demonstrate the proposed method: as a result, the validation accuracy of the CNN with a fully-connected layer was only up to 1.4%; contrastively, the validation accuracy of the CNN with GAP was very high at up to 41.7%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.126-132
• /
• 2002

Jitter induced from several payloads on-board satellites degrade the performance of pointing accuracy and attenuate the resolving power of highly-precise camera image such as KOMPSAT II. In this paper, we introduce a micro-vibration measurement technique, analysis of dynamic characteristics, and modeling method for a reaction wheel assembly which is one of the major sources of jitter in satellites and an effective vibration reduction techniques are considered. Based on these techniques, vibration measurement and passive control were performed with an micro-vibration generator which was designed to have similar dynamic performances with an actual reaction wheel assembly above 50Hz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12A
• /
• pp.983-990
• /
• 2003

In this paper, a noncoherent code tracking loop is designed for 3GPP MODEM and its performance is analyzed in terms of steady-state jitter variance and transient response characteristics. An analytical closed-form formula for steady-state jitter variance is Int derived for AWGN environments as a general function of a pulse-shaping filter, timing offset, signal-to-interference ratio, and loop bandwidth, together with the analysis on the transient response characteristic of a tracking loop. Based on the analysis, the code tracking loop with variable loop bandwidth that is efficient for full digital H/W implementation is designed and its performance is compared with that of the code tracking loop with fixed loop bandwidth, along with the verification by computer simulations.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.265-270
• /
• 2000

We investigate the effects of the power and wavelength of externally injection seeded light on timing jitter and pulse width in a gain-switched $1.55\mu\textrm{m}$ DFB semiconductor laser by numerical simulation based on the transmission line laser model. As external seeding power increases, the timing jitter decreases and the pulse width increases. The lowest timing jitter is observed when the seed wavelength is aligned with the chirped spectrum center. By external seeding, we can decrease the timing jitter up to 1/2.7 without noticeable increase in pulse width. Our simulation results reasonably well agree with our sampled experiment and the other published papers. This proves the validity of our model to analyze a system based on a semiconductor laser. laser.

• Phonetics and Speech Sciences
• /
• v.7 no.4
• /
• pp.59-65
• /
• 2015

This study was conducted to identify the differences in voice characteristic variables before and after taking a certain amount of high-caffeine. Linear PCM-M10 Recorder (SONY) was used for the recorder and basic frequency of the voice (Fo), frequency fluctuation rate (jitter), amplitude fluctuation rate (shimmer) and Signal-to-Noise Ratio (SNR) were measured using TF-32(University of Wisconsin-Madison, USA). First, prolonged phonation analysis results of /ah/ by male subjects showed the shimmer values after taking high-caffeine increased statistically significantly(p<.05) compared with before the intake and SNR values significantly decreased. (p<.05). On the other hand, female subjects didn't show any statistically significant differences in all variables. Second, male subjects showed statistically significant increased shimmer values after the intake compared with before the intake at /ah/ of syllable 'na' and /ah/ in 'ra' in 'autumn' paragraph (p<.05), and jitter values significantly increased at /ah/ in 'ah' (p<.05). However, female subjects didn't show any statistically significant differences in all variables. Results of this study showed that high-caffeine intake more affects male subjects than female subjects. In male subjects, shimmer and SNR changed at vowel prolonged phonation, /ah/, and study results showed that shimmer and SNR in 'Autumn' paragraph /na/, /ra/ and jitter in /ah/ could be identified as the variables to show the voice change.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.1
• /
• pp.64-73
• /
• 2012

Pointing stability of high precision observation satellites must satisfy the stringent requirements to perform at a designed level. As even a small vibrational disturbance can result in severe degradation of the optical performance, the effects of inorbit vibrational environment on the performance of optical payload must be predicted and analyzed in the design phase in order to ensure that the requirements imposed on the payload are fully met. In this paper, an integrated framework for the evaluation of the performance of optical payloads is developed. The developed simulation tool comprises of the reaction wheel induced disturbance model, state space model of a structure in modal form and Cassegrain reflector model. The performance degradation of the optical system due to jitter is expressed by using modulation transfer function (MTF) and image simulation. Moreover, vibration isolator model is also added to show the effectiveness of using a vibration isolator for the elimination of the effects of jitter in the acquisition of an image.

• MALSORI
• /
• no.44
• /
• pp.47-59
• /
• 2002

Mean F0, Jitter, Shimmer, and NHR were measured in 21 opera singers, 13 Korean traditional 'pansori' singers, and 21 non-singers. Four voice sampling conditions were ordinary /α/ prolongation, /α/ prolongation using vocal technique as if the subjects were singing, oral reading of the words of a song, and singing. One-way ANOVA and Sheffe post-hoc analysis were used to identify significant differences among the groups. The mean F0 was significantly different among the 3 groups in all conditions except for the ordinary /α/ prolongation condition. The opera singers produced lower jitter and NHR compared to 'pansori' singers and non-singers only in the singing condition.

• Phonetics and Speech Sciences
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2016

The purpose of this study is to know the acoustic characteristics of voice under stressful and relaxed conditions. Ten undergraduate male students participated in this study and produced 아, 에, 이 vowels in English reading, difficult Korean reading under stressful conditions, and easy Korean reading under relaxed conditions. After that, F0, jitter, shimmer, NHR, F1, F2, and F3 values were measured and analyzed. The results of this study demonstrate that speech parameters related to stress are jitter, shimmer, and NHR in that these values are lower under relaxed situations (easy Korean reading) than that of stressful situations (English and difficult Korean reading). This study will be a foundation to verify that the analysis of acoustic characteristics can serve as a quantitative tool for measuring stress levels.