• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.86-101
• /
• 2019

Remote sensing technology has been continuously developed both quantitatively and qualitatively, including platform development, exploration area, and exploration functions. Recently, the use cases and related researches in the agricultural field are increasing. Also, since it is possible to detect and quantify the condition of cropland and establish management plans and policy support for cropland and agricultural environment, it is being studied in various fields such as crop growth abnormality determination and crop estimation based on time series information. The purpose of this study was to analyze the vegetation index for agricultural land reclamation area using a UAV equipped with a multi-spectral sensor. In addition, field surveys were conducted to evaluate the accuracy of vegetation indices calculated from multispectral image data obtained using UAV. The most appropriate vegetation index was derived by evaluating the correlation between vegetation index calculated by field survey and vegetation index calculated from UAV multispectral image, and was used to analyze vegetation index of the entire area.

• Journal of radiological science and technology
• /
• v.44 no.6
• /
• pp.635-643
• /
• 2021

The results of empirical researches on the diagnosis of lung cancer are insufficient, so it is limited to objectively judge the clinical possibility and utilization according to the accuracy of diagnosis. Thus, this study retrospectively analyzed the lung cancer diagnostic performance of PET-MRI (Positron Emission Tomography-Magnetic Resonance Imaging) by using the decision matrix. This study selected and experimented total 165 patients who received both hematological CEA (Carcinoembryonic Antigen) test and hybrid PET-MRI (¹⁸F-FDG, 5.18 MBq/kg / Body TIM coil. VIVE-Dixon). After setting up the result of CEA (positive:>4 ㎍/ℓ. negative:<2.5㎍/ℓ) as golden data, the lung cancer was found in the image of PET-MRI, and then the SUV_max (positive:>4, negative:<1.5) was measured, and then evaluated the correlation and significance of results of relative diagnostic performance of PET-MRI compared to CEA through the statistical verification (t-test, P>0.05). Through this, the PET-MRI was analyzed as 96.29% of sensitivity, 95.23% of specificity, 3.70% of false negative rate, 4.76% of false positive rate, and 95.75% of accuracy. The false negative rate was 1.06% lower than the false positive rate. The PET-MRI that significant accuracy of diagnosis through high sensitivity and specificity, and low false negative rate and false positive rate of lung cancer, could acquire the fusion image of specialized soft tissue by combining the radio-pharmaceuticals with various sequences, so its clinical value and usefulness are regarded as latently sufficient.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.2
• /
• pp.41-50
• /
• 2020

Acting is an act of expressing personality, image, sound, tempo, and movement flexibility in order to effectively express fictional characters in the play. It is said to refer to the action or mood of the person performing the character. In addition, all these acts are important elements of the media that the director wants to convey the subject of the work to the audience. In particular, the actor relies on the ambience, image and passionate role of winning and losing in theatrical film. In addition, more than 60% of the afterimages or remaining images in the film are images of the actor's acting or movement, and the trend of the actor. This study is not about acting divided by Conti, who is under the control of directors and directors. The purpose of this study is to analyze the aesthetic response and analyze the inner half of the suspense in the act and to help influence the expression that is effective in expressing the play.

• Journal of radiological science and technology
• /
• v.46 no.6
• /
• pp.485-491
• /
• 2023

As an auxiliary tool for fixing the patient's posture when taking an X-ray, sponges with high radiolucencies are laminated in various thicknesses. This study aimed to evaluate the usefulness of an auxiliary tool for hand oblique projection X-ray by manufacturing it with a uniform thickness by 3D printing and comparing it with existing sponge tools. In the auxiliary tool, radiolucency was measured at the stairs where each finger was located, and pixel information values were compared in the digital imaging and communications in medicine(DICOM) image. Contrast to noise ratio(CNR) and signal to noise ratio(SNR) were compared by shooting the hand phantom and the auxiliary tool together. As the thickness of the sponge tool increased, radiolucency decreased by 15.52% and pixel information value increased by 20.61%. The transmittance of the 3D printing tool increased by 0.82%, and the pixel information value differed by 5.66%. CNR and SNR increased by 20.03% and 22.42% in 3D printing compared to existing sponge tools. while taking hand oblique projection, maintaining the thickness of the auxiliary tool uniformly through 3D printing maintains high radiolucency and minimal impact on medical images, and increases CNR and SNR, making it useful as an auxiliary tool for taking hand oblique projection.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.6
• /
• pp.499-508
• /
• 2023

In this paper, we propose a technique to estimate the coordinates of feature points existing on a 2D planar object in the three dimensional space. The proposed method detects multiple 3D features from the image, and excludes those which are not located on the plane. The proposed technique estimates the planar homography between the planar object in the 3D space and the camera image plane, and computes back-projection error of each feature point on the planar object. Then any feature points which have large error is considered as off-plane points and are excluded from the feature estimation phase. The proposed method is archived on the basis of the planar homography without any additional sensors or optimization algorithms. In the expretiments, it was confirmed that the speed of the proposed method is more than 40 frames per second. In addition, compared to the RGB-D camera, there was no significant difference in processing speed, and it was verified that the frame rate was unaffected even in the situation that the number of detected feature points continuously increased.

• The Research Journal of the Costume Culture
• /
• v.16 no.5
• /
• pp.955-962
• /
• 2008

This article is about the naming method for fashion product in cyber shopping mall. For two months, the name of fashion product is listed and analyzed, from BEST 100 category in cyber shopping mall. SPSS ver.10.0 is used and frequency, spearman raw test and t-test are done. The fashion product names are arranged in naming method. There are four kinds of methods for fashion product naming; describing, associating, bundling and style numbering. Describing is most used method both cyber shopping mall. Between marketplace cyber shopping mall and merchant, there is significant difference in composition of naming. Bundling naming method is more used in marketplace cyber shopping mall, and describing and style numbering method is used often in merchant. The words which are composed the name of fashion product are divided in a single word and arranged. The words for describing are classified in noun and adjective. Noun is used for depicting textile and construction and adjective is for touch and image. There is no difference for using words between marketplace and merchant.

• Journal of the Korean Society of Safety
• /
• v.28 no.2
• /
• pp.21-25
• /
• 2013

The purpose of this study is to provide basic data for the safety assessment of a water purifier when water leaks due to inappropriate maintenance and the examination of the cause of accidents related to the leak. Due to its inspection and management by non-specialists, if a leak occurs in a water purifier with the water level controller being inclined, it may result in the failure of the compressor, power supply line, PCB, etc. The analysis of the thermal diffusion pattern of water purifier compressors using a thermal image camera shows that its maximum temperature was approximately $80^{\circ}C$. In addition, its operating current was a maximum of 13 A and the system's operating current was approximately 1.7 A after the compressor was charged. It was found that the housing type power cable cover of the compressor had the effect of preventing electric shock but has poor flame resistance. Furthermore, the performance of the overload protector, PTC relays, etc., was excellent but they have potential for problems as metallic terminals were exposed, resulting in the potential of a safety related accident. The terminals and their surface damaged by the tracking showed a trace of carbonization and the resistance between terminals was measured to be approximately $8{\Omega}$. In addition, while the tracking was proceeding, the fuse and circuit breaker installed for system protection did not operate.

• Journal of Educational Research in Mathematics
• /
• v.15 no.3
• /
• pp.273-286
• /
• 2005

We teach students to explore geometric figures by its properties and establish relationships between some basic figures. The concept of parallel line play very im-portant roles in such geometry learning process. In this study, 1 investigate the con-cept of parallel line we teaching in elementary school. Students have wrong concept images for parallel line, which is the result of the elementary school mathematics text books, where only typical cases for parallel line Is presented and there is no method to find if two lines is parallel or not. Therefore, we should teach explicitly students to find if two lines is parallel or not. The depth study on it is needed to develope students' geometric thought level.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.3
• /
• pp.1-6
• /
• 2010

A new testing method named pitch deposit tester (PDT) was developed by KRICT in order to evaluate the deposit potential of micro-stickies. The new method involves depositing the potential pitch particles on the air bubble covered plastic film set in the pitch deposit tester (PDT) and analysing the deposited area by an image analyzer. In this study, the effect of fixing agents on potential pitch deposition was elucidated. The effects of some fixing agents (polyamine and polyethyleneimine) on pitch control were investigated by the PDT test of 100% recycled newsprint stock. The study suggested that proper use of the PEI can lead to better pitch control than that of polyamine. The efficiency of novel screening method using the PDT and retention and drainage analyser (RDA) for fixing agents in terms of retention and deposit contamination could be confirmed by above mentioned results.

• Journal of the Korean Society of Costume
• /
• v.60 no.3
• /
• pp.56-65
• /
• 2010

It is time to create an image of Korea that uniquely defines and represents the nation to the world, by incorporating Korean traditions with the cultural industry. To this end, it is important to see the beauty of Korean tradition from an academic perspective and further explore its utility from an industrial viewpoint. This study is intended to design uniforms for employees in Korean restaurants at hotels or docents in Korean-styled museums. In doing so, we eyed on Baeja, a Korean traditional vest as the cultural archetype, and created cultural products. As our archetype, we chose two pieces of Baeja : one excavated from the tomb of Suryun Sim (1534-1589) which is displayed in the Gyeonggi Provincial Museum, and the other from Byeon of the Jeonju Lee family (1636-1731) in Suk Joo-Sun Memorial Museum at Dankook University. We also adopted Dapho with a Korean traditional vest with long length. Based on these cultural archetypes, seven products were developed. With the traditional food and way of living in Korea being more and more recognized in the global stage, it would be continuous creation and development of cultural contents with history and story rooted in the cultural heritage of the nation that could enrich our culture by bringing traditions back to the modern days to incorporate the past into the present. It is important to restore traditions when developing cultural products. However, it is also critical to commercialize ideas with stoη and creativity in the market for cultural products.