• 제목/요약/키워드: Japanese larch

검색결과 154건 처리시간 0.029초

초음파 비파괴 시험법을 이용한 탄성계수의 산정을 통한 침엽수 구조용재의 이방성에 관한 기초연구 (Anisotropy of Softwood Structural Lumber Using The Elastic Modulus Determined by The Ultrasonic Nondestructive Method)

  • 오세창
    • Journal of the Korean Wood Science and Technology
    • /
    • 제45권1호
    • /
    • pp.20-27
    • /
    • 2017
  • 본 연구의 목적은 목재의 세 주요 축 방향에 대하여 각 방향별 탄성계수를 비파괴적으로 측정하여 이에 따른 목재의 이방성을 검토해 보고자 하였다. 결점이 없는 SPF (spruce-pine-fir)와 Hem-fir 및 낙엽송재에 대하여 무결점 시험편을 채취하고 각 시험편에 대해 세 방향에서 초음파 속도를 측정한 다음, 이 속도와 각 재료의 밀도를 이용하여 산정된 탄성계수를 비교하였다. 시험 결과 초음파속도 및 탄성계수는 방향별로 목재의 길이방향, 방사방향, 접선방향의 순으로 나타났으며, 밀도가 높을수록 각 방향별 탄성계수가 더 높게 나타났다. 수종 간에 있어서 길이방향의 탄성계수의 차이보다 방사방향, 접선방향의 차이가 더 크게 나타났다. 산정된 탄성계수를 사용하여 재료의 이방성을 비교하여 제시하였으며, 이를 통해 강성매트릭스의 대각선 항을 산정하였다.

경골목구조에서 구조재와 오에스비로 구성된 못 접합부의 인발 및 전단성능 (Withdrawal and Lateral Resistance of Nail Joints Composed of Dimension Lumber and OSB in Light-Frame Wood Construction)

  • 오세창
    • Journal of the Korean Wood Science and Technology
    • /
    • 제41권3호
    • /
    • pp.211-220
    • /
    • 2013
  • 경골목조건축에서 못 접합부는 수평하중을 지지하고 전달하도록 설계되지만, 바람으로 인한 상향력처럼 인발하중에 직면하기도 한다. 본 연구에서는 경골목조건축에서 일반적으로 사용되는 구조재와 덮개로 구성된 못 접합부에 대하여 인발성능과 2면 전단시험을 통해 인발 및 측방하중에 대한 내력성능을 시험하고 설계기준에 부합되는 가를 평가하였다. 인발하중에 대한 내력성능은 부재의 비중에 의해 크게 좌우되었으며 I형장선의 경우 낮은 밀도에도 불구하고 높은 인발성능을 나타내었다. 최대 인발하중은 기준허용 최대 인발하중보다 매우 높게 나타났다. 전단성능도 비중이 큰 낙엽송과 오에스비로 구성된 접합부가 비중이 작은 SPF와 오에스비로 구성된 접합부보다 높은 성능을 나타내었으며 모두 기준설계치보다 높은 성능을 나타내었다. 접합부의 변형은 주로 못의 휨 변형에 의한 것으로 나타났으며 SPF와 오에스비로 구성된 접합부에서의 못의 휨 변형이 현저하게 나타났다.

비파괴 시험에 의한 국산 침엽수 $2{\times}6"$ 구조부재의 등급구분 (Grading of Domestic Softwood $2{\times}6$ Structural Lumber by Non-destructive Test)

  • 심국보;박정환;김광모
    • 임산에너지
    • /
    • 제25권2호
    • /
    • pp.49-54
    • /
    • 2006
  • 국산 침엽수재의 구조재 활용에 필요한 등급구분을 위해 소나무, 잣나무와 낙엽송 $2{\times}6"$ 부재에 대해 초음파를 이용한 비파괴 방법을 적용하였다. 정적 탄성계수와 초음파 시험에 의한 동적 탄성계수의 상관관계를 나타내는 k-factor는 소나무의 경우 1.0602, 잣나무 1.0013, 낙엽송 1.2320로 나타났다. k-factor를 적용할 경우 비파괴방법에 의한 동적 탄성계수 측정에 의해 침엽수 구조부재 등급구분이 가능할 것으로 판단되었다. 기계응력 등급구분에서 소나무는 E9 이상의 등급이 전체의 76%인 반면 잣나무는 E7 이상의 등급이 전체의 85%, 낙엽송은 E11 이상의 등급이 68% 분포하였다. 정적 탄성계수와 휨파괴계수(MOR)의 상관관계도 비교적 높게 나타나 이를 동적 탄성계수로부터 추정한 k-factor와 연계할 경우 초음파 비파괴 등급구분 방법에 의해 국산 침엽수재의 휨강도 성능평가가 가능할 것으로 판단되었다.

  • PDF

주요 국산 침엽수 통원주 부재의 송풍오-븐건조 특성 - 제1보: 국산 낙엽송 통원주 부재를 중심으로 - (Air Circulating Oven-drying Characteristics of Hollowed Round-post for Korean Main Conifer Species - Part 1: For Japanese larch hollowed round-post -)

  • 이남호;;신익현;이창진
    • Journal of the Korean Wood Science and Technology
    • /
    • 제40권1호
    • /
    • pp.44-52
    • /
    • 2012
  • 낙엽송 원통형 원주목에 대하여 수증기댐처리와 코팅처리를 실시하여 오-븐건조 하면서 건조속도, 재내의 수증기압 및 재온분포 및 건조할렬 등을 조사한 결과는 다음과 같다. 생재에서 난방된 실내의 이용함수율 수준인 함수율 약 8%까지 건조하는데 72~144시간 소요되었다. 무처리재와 코팅처리재는 전 건조기간에 걸쳐 통공층의 온도가 통피층의 온도보다 항상 높은 분포모형을 보인 반면, 수증기댐처리재의 경우 통피층의 온도가 통공층보다 높거나 같은 분포를 보였다. 수증기댐처리재와 코팅처리재의 경우는 거의 전 건조기간에 걸쳐 통피층의 수증기압이 통공층 보다 큰 분포를 보였다. 총체적으로 할렬발생 정도는 미약하였으며 할렬개수는 코팅처리재, 수증기댐처리재, 무처리재의 순으로 양호한 것으로 나타났다.

국내산 소나무, 잣나무, 낙엽송, 분비나무 정유의 제초활성 (Herbicidal Activities of Essential Oils from Pine, Nut Pine, Larch and Khingan Fir in Korea)

  • 윤미선;조해미;연보람;최정섭;김성문
    • Weed & Turfgrass Science
    • /
    • 제2권1호
    • /
    • pp.30-37
    • /
    • 2013
  • 본 연구의 목적은 국내의 대표적인 침엽수인 소나무, 잣나무, 낙엽송, 분비나무로부터 추출된 정유의 제초활성을 이해하는데 있었다. 소나무, 잣나무, 낙엽송, 분비나무 정유의 기내 종자발아 제초활성 검정 결과, 유채에 대한 $GR_{50}$ 값은 각각 0, 4,766, 1,865, $5,934{\mu}g\;ml^{-1}$으로 소나무를 제외하고는 제초활성을 나타내었다. 온실조건에서 소나무, 잣나무, 낙엽송, 분비나무 정유 10%를 5종의 화본과 잡초와 5종의 광엽잡초에 처리한 결과 도꼬마리를 제외하고는 24시간 내에 완전 고사되었으며, 처리 식물의 부위는 타는 듯한 화염상 증상을 나타내었고, 처리 3일 이후에는 신초가 재생하여 4종 식물 정유는 속효성, 비선택성, 비이행성 특성을 나타내었다. 소나무, 잣나무, 낙엽송, 분비나무의 정유를 GC-MS로 분석한 결과 각각 16종, 25종, 25종, 16종의 유기화합물이 검출되었으며, 이들 정유에는 탄화수소, 알코올, 케톤, 에스테르가 공통적으로 함유되어 있었다. 그리고 정유 4종의 주 화합물은 3-carene, bornyl acetate, camphene, limonene, ${\alpha}$-pinene, ${\beta}$-pinene, ${\beta}$-phellandrene 이었다.

Manufacture of Cement-Bonded Particleboards from Korean Pine and Larch by Curing of Supercritical CO2 Fluid

  • Suh, Jin-Suk;Hermawan, Dede;Kawai, Shuichi
    • Journal of the Korean Wood Science and Technology
    • /
    • 제28권4호
    • /
    • pp.41-50
    • /
    • 2000
  • Cement-bonded particleboard is being used as outdoor siding material all over the world, because this composite particularly bears a light weight, high resistance against fire, decay, and crack by cyclic freezing and thawing, anti-shock property, and strength enhancement. Construction systems are currently changing into a frame-building style and wooden houses are being constructed with prefabrication type. Therefore, they require a more durability at outdoor-exposed sides. In this study, the cement hydration property for Korean pine particle, Japanese larch particle and face- and middle layer particles (designated as PB particle below) used in Korean particleboard-manufacturing company was investigated, and the rapid manufacturing characteristics of cement-bonded particleboard by supercritical $CO_2$ curing was evaluated. Korean pine flour showed a good hydration property, however, larch flour showed a bad one. PB particle had a better hydration property than larch flour. The addition of $Na_2SiO_3$ indicated a negative effect on hydration, however, $MgCl_2$ had a positive one. Curing by supercritical $CO_2$ fluid gave a conspicuous enhancement in the performances of cement-bonded particleboards compared to conventional curing. $MgCl_2$ 3%-added PB particle had the highest properties, and $MgCl_2$ 1%-added Korean pine particle had the second class with the conditions of cement/wood ratio of 2.7, a small fraction-screened particle and supercritical curing. On the contrary, the composition of non-hammermilled or large fraction-screened particle at cement/wood ratio of 2.2 was poorer. Also, the feasibility for actual use of 3%-added, small PB particle-screened fraction was greatest of all the conventional curing treatments. Relative superiority of supercritical curing vs. conventional curing at dimensional stability was not so apparent as in strength properties. Through the thermogravimetric analysis, it was ascertained that the peak of a component $CaCO_3$ was highest, and the two weak peaks of calcium silicate hydrate and ettringite and $Ca(OH)_2$ were present in supercritical treatment. Accordingly, it was inferred that the increased formation of carbonates in board contributes to strength enhancement.

  • PDF

Study of the Distribution Properties and LRFD Code Conversion in Japanese Larch

  • Park, Chun-Young;Pang, Sung-Jun;Park, Ju-Sang;Kim, Kwang-Mo;Park, Mun-Jae;Lee, Jun-Jae
    • Journal of the Korean Wood Science and Technology
    • /
    • 제38권2호
    • /
    • pp.94-100
    • /
    • 2010
  • This study was performed to develop an LRFD (Load Resistance Factored Design) Code for Domestic Larch. To accomplish his, we evaluated bending, compression, tension and shear strength. The results of the strength evaluation were utilized to verify the distribution and code conversion. For bending, tension and compressive strength, the Weibull distribution was well-fitted, but for shear strength we observed a normal distribution. For evaluating the bending and compressive strength, a full-sized specimen was used. A small clear specimen was used to test tension and shear strength. Compressive strength in particular was found to be affected by tight knots, although there was little difference between grades. In the code conversion, the design value of the LRFD was larger than the existing allowable stress value in the Korean Building Code. However, the allowable stress in this study was about two times higher than the value listed in the Korean Building Code. This result induced the difference between the soft and hard conversions. For greater reliability, the accumulation of additional data is necessary and further studies should be performed

수종(數種)의 침엽수(針葉樹) 단판용(單板用) 원목(原木)의 가열(加熱)과 냉각(冷却) 시간(時間) (Heating and Cooling Time for Veneer Bolt of Some Softwoods)

  • 정희석;이남호;여환명
    • Journal of the Korean Wood Science and Technology
    • /
    • 제23권3호
    • /
    • pp.16-22
    • /
    • 1995
  • The profiles of the heating temperature in three water vat temperatures (55, 66 and 77$^{\circ}C$) and the cooling temperature under the average ambient temperature of 3$^{\circ}C$ in 4 and 10cm depths from surface at the center of veneer bolts length showed similar patterns for Japanese larch (Larix leptolepis). Dahurian larch (Larix gmelinei) and Radiata pine (Pinus radiata). The difference of these core temperatures of 10cm depth from surface varied proportionally with the increase of vat temperatures. The average heating time based on final core temperature of 6$^{\circ}C$ lower than vat temperature required about 14.5 hours in vat temperature of 55$^{\circ}C$ and 13.5 hours in vat temperature of 66and 77$^{\circ}C$. Each internal temperature of 4 and 10cm depths from surface started to decrease from the beginning of cooling and after about two hours.

  • PDF

Fertilization and Tree Density Effects on Cellulose Decomposition in a Larix leptolepis Plantation

  • Kim, Choonsig;Kim, Oue-Ryong;Ahn, Hyun-Chul;Cho, Hyun-Seo;Choo, Gab-Chul;Park, Jae-Hyeon
    • The Korean Journal of Ecology
    • /
    • 제25권6호
    • /
    • pp.399-403
    • /
    • 2002
  • Cellulose mass loss by cellulose filter papers was measured for 3 time (35 days, 70 days, 105 days) incubation during the growing season (from May to September 2002) with different tree density and after fertilization in a Japanese larch (Larix leptolepis) plantation. Cellulose mass loss rates were significantly different between tree density types and fertilization treatments during the study periods. After 105 day incubation of cellulose filter paper, cellulose mass loss rates were significantly higher in the low tree density (70.1 $\%$) than in the high tree density (49.9$\%$). Cellulose mass loss rates averaged 62.8$\%$ in the fertilization and 58.9% in the unfertilization treatments during the same periods. However, cellulose mass loss was not significantly different between the forest floor and the mineral soil layer except for 35 day incubation. The results indicate that cellulose decomposition rates are a useful index to express differences in organic matter decomposition activity in different tree density and after fertilizer treatments.

침엽수(針葉樹) 제재(製材)의 4계절별(季節別) 천연건조(天然乾燥) 과정(過程)의 비교(比較) (Comparison of Air-Drying Process in Four Seasons for Some Softwood Lumbers)

  • 정희석;이남호;이준호;권주용
    • Journal of the Korean Wood Science and Technology
    • /
    • 제25권1호
    • /
    • pp.28-36
    • /
    • 1997
  • Several thick board and dimension lumbers of Japanese larch(Larix leptolepis), Dahurian larch(Larix gmelini) and radiata pine(Pinus radiata) air-dried in four different seasons to compare air-drying process. Patterns of air-drying curves were influenced by climatological conditions and limber thickness. The initial drying rates of summer were the highest, followed those of fall, spring and winter. The drying times to equilibrium moisture contents for four seasons were nearly the same except for winter. However, the drying time for winter required twice more time than the other seasons. The drying time of dimension lumbers required 1.3 times more than boards. The final moisture contents were lowest during spring, highest during winter and similar between summer and fall.

  • PDF