• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.969-974
• /
• 2008

As the railway becomes higher, the reliable stability and riding comfort of higher railway are required. To improve the riding comfort of high-speed trains, it is very helpful to use active suspension system for railway. In Japan, the high-speed train, Shinkansen has adopted semi-active suspension system and now it is running in the main trunk. In this paper, the authors introduce several technical trends of vibration control methods of Japanese Shinkansen. And the installation of semi-active suspension to HSR 350x and the test result of test run on the Kyoung-Bu high speed ling are also explained. After development of HSR 350x, new R&D national project of high speed train is progressed by Ministry of Land, Transport, and Maritime Affairs. This project is the development of Electric Multiple Unit of high speed train with 400km/h of maximum test speed. These result would be helpful to progress next generation high speed project.

• International Journal of Railway
• /
• v.5 no.2
• /
• pp.65-70
• /
• 2012

This paper introduced a novel railway system, Automatic Train Protection and Block (ATPB) briefly, which is proposed to improve the efficiency of existing regional train lines with low cost in Japan. The biggest superiority of ATPB system is a great use of universal and mature technologies, such as GPS and regular mobile telephone networks, so that there is nearly no increment of trackside equipments in the reconstruction. Then in order to guarantee the system safety, a formal model of ATPB is established and analyzed by formal method VDM++. Firstly, the specification is specified by VDM++ formally without ambiguity. Secondly, its internal consistency is proved by discharging the proof obligations. And finally, its satisfiability is checked by systematic testing, which executes specification and checks the outputs against corresponding inputs.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.894-899
• /
• 1998

To absorb the deformation of live load, thermal gradient, shrinkage and creep in bridge structures and general structures, expansion joint has to be established. Especially expansion joint for high-speed railway bridge has to accomodate the static and dynamic forces and it not only has the durability of itself but also maintain the durability of structure by preventing the leakage of water. The actual used product of expansion joint for high-speed railway bridge is only ones made in France, Germany and Japan. In this study, the development process and test results of developed expansion joint are introduced which has the functional operation and durability enough to apply to high-speed railway bridges, roadway bridges and general structures. The tests consist of fatigue-durability test of 3 million times by high-speed rail load, leakage test and jack-up test for verifying the possibility of exchanging it. The performance of developed expansion joint satisfy the specification of Korea High Speed Rail Construction authority.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.24-29
• /
• 1998

To absorb the deformation of ,external live load, thermal gradient, shrinkage and creep in bridge structures and general structures, expansion joint has to be established. Especially expansion joint for high-speed railway bridge has to accomodate the static and dynamic forces and it not only has the durability of itself but also maintain the durability of structure by preventing the leakage of water. The actual used product of expansion joint for high-speed railway bridge is only ones made in France, Germany and Japan. In this study, the development process and test results of developed expansion joint are introduced which has the functional operation and durability enough to apply to high-speed railway bridges, roadway bridges and general structures. The tests consist of fatigue-durability test of 3 million times by high-speed rail load, leakage test and jack-up test for verifying the possibility of exchanging it. The performance of developed expansion joint satisfy the specification of Korea High Speed Rail Construction Authority.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2768-2774
• /
• 2011

In this paper, we investigate the methods to improve the position accuracy using DGNSS(Differential Global Navigation Satellite System). Then we configure the real-time DGNSS environment with use of GPS and MSAS as SBAS(Satellite Based Augmentation System) currently being in service by Japan. And we verify the improvement of position accuracy and the continuity of GPS correction data through the realtime DGNSS test in Joongang line, Kyungbu line, Honam line.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1631-1635
• /
• 2011

To consider dynamic magnification effect at the static design stage, impact load factor is applied to design load. Current impact load factor adopted EUROCODE without verification while Japan suggested impact load factor including velocity of high-speed train throughout theoretical and experimental studies. On the purpose of evaluate current impact load factor, this study investigated the calculation of impact load factor from dynamic response of running train.

• Journal of the Korean Society for Railway
• /
• v.10 no.1 s.34
• /
• pp.23-37
• /
• 2007

Since 1964, HSR, which was opened in Japan, has had a hoge impact on the world. Historically, HSR has similar characteristics to the Roman Road, which promoted rapid movement and hada great influence on international society as transport infrastructure. Recently the development of HSR has become more rapid because of economic, environmental and external cost concern, emphasizing Environmentally Sustainable Transport(EST). In particular, the external cost has become more important factor for justifying HSR. The successful factors of HSR are high demand and cost minimal construction costs. There are two successful HSR models, the Japanese and the French. The former operates based on high demand oriented and the latter focuses on its minimizing costs. The demand orientated model means HSR carries over 100,000 passengers per day as in Japan and Far East Asian countries. The cost minimized model focuses on lower operation and construction costs as in France. In particular, Germany carries both passengers and freight on HSR. The construction costs in Germany are in between those of Japan and France. In future, Korea, Taiwan and China HSR will follow Japan's successful model because of high population density and concentration of economic activity along railway lines. This paper supports Vickerman's argument that HSR is justified where there is a demand of between 12 million and 15 million railway passenger a year(about 40thousand persons/day) between two urban center. This will be shown in the future in Korea, in Taiwan and China. Finally, this paper reviews that HSR activates at 250km/h for dedicated new lines and 200km/h for upgraded lines. In particular, it is successful in area of high population density and cost minimizing technology.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.206-210
• /
• 2005

The Maglev system is environmentally friendless system, has excellent running capabilities and lower life cycle cost. The Maglev has been developed by Germany and Japan since 1970's. Then, Transrapid of Germany, super high speed type, had started for commercial operating at Sanghai of China in the early of 2004. In March of this year, HSST of Japan, urban type, had been serviced at Tobukyuro Line which links between Nagoya and Aichi. Recently, in Korea, Maglev system has been reviewed for commercial application.

• Journal of the Korean Society for Railway
• /
• v.8 no.4
• /
• pp.354-360
• /
• 2005

The railway track and the substructures constructed in the field test section of Kyongbu High Speed Line are the structures for HSL, for the first time designed and constructed by domestic technical group. It is very important to verify the local design criteria and specifications for these structures and also to assure the recordings for vibration or deflection produced on the essential parts of the structures. The study to verify the high-speed railway track performance and to ensure the run in safety on the track in curved section during the KTX run. Finally, the conclusion are drawn as follows. The measuring values of the deflection effort of the rail and displacement for verifying the track performance in the field test section of Kyoungbu HSL satisfy the criteria of the foreign countries (Japan and Germany). The measured value for the wheel load and the presumed value show the consistent tendency. The wheel loads of the exterior and interior of the rails at the speed superior to 300km/h are measured same. Finally, the comparison between the theoretical value presented during the verification of the derailment to evaluate the safety of the train run at the time of the detailed design of the track and the measured value in the field shows that the correct design of track structure was applied.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.15-19
• /
• 2009

Due to the Japan's Kobe earthquake in 1995, a cut-and-cover tunnel, which is one of subway facilities, collapsed unexpectedly. As a result, also in Korea, seismic performance needs to be secured for the cut-and-cover tunnel and currently, the subway seismic design standard is based on the seismic performance. However, there is no standard for the damage level or stability level of a member for securing the seismic performance, and the definition of multi-level seismic performance is not sufficient. By contrast to this situation, in the Japan's evaluation method of seismic performance, design earthquake ground motion having reflected there into the subway driving stability is clearly defined and the seismic performance required for structures is classified in detail. This study analyzes the Japan's systematic evaluation method of seismic performance for cut-and-cover tunnels of subway.