• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.677-682
• /
• 2016

Recently, because Global Positioning System (GPS) achieves accuracy for engagement of enemy targets, GPS guided weapons have a wide range of applications from land through sea to air. Especially, when GPS guided weapon is then launched, it reads current position and searches a course to the target. As we all know, because GPS signals are weak, these signals can be affected by interference. If jamming signal is strong enough, it can jam the receiver of GPS guided weapon. Therefore, anti-jamming technique is an important thing under these conditions. In this paper, the controlling azimuth angle was used to improve navigation performance of precision guided missile under jamming conditions. First of all, precision missiles by GPS positioning such as SLAM-ER and JDAM were investigated. Also, the azimuth cutoff angle of satellites for usable navigation under jamming signals was analyzed by experimental tests. As a result, we found that azimuth cutoff angle under 140 degree can help ensure continuous GPS reception under the missile guidance.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.3
• /
• pp.115-122
• /
• 2015

Global Positioning System (GPS) is used in various fields such as communications systems, transportation systems, e-commerce, power plant systems, and up to various military weapons systems recently. However, GPS receiver is vulnerable to jamming signals as the GPS signals come from the satellites located at approximately 20,000 km above the earth. For this reason, various anti-jamming techniques have been developed for military application systems especially and it is also required for commercial application systems nowadays. In this paper, we proposed a dual-channel Global Navigation Satellite System (GNSS) RF ASIC for digital pre-correlation anti-jam technique. It not only covers all GNSS frequency bands, but is integrated low-gain/attenuation mode in low-noise amplifier (LNA) without influencing in/out matching and 14-bit analogdigital converter (ADC) to have a high dynamic range. With the aid of digital processing, jamming to signal ratio is improved to 77 dB from 42 dB with proposed receiver. RF ASIC for anti-jam is fabricated on a 0.18-μm complementary metal-oxide semiconductor (CMOS) technology and consumes 1.16 W with 2.1 V (low-dropout; LDO) power supply. And the performance is evaluated by a kind of test hardware using the designed RF ASIC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.723-730
• /
• 2017

In this paper, we consider an online compensation algorithm considering the mutual coupling and suggest a new GPS antenna array to apply. To evaluate the anti-jamming performance for the proposed antenna array, ULA and URA, we divide direction finding of multiple jamming signals into environments. 1. there is no mutual coupling. 2. there is mutual coupling but no compensation. 3. mutual coupling is compensated. RMSE analysis showed that the online compensation algorithm works and that peak detection is possible for multiple jamming signals.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.10
• /
• pp.869-875
• /
• 2016

In this paper, a novel scheme with which to mitigate a repeat-back jamming effect is proposed for the GPS L1 coarse/acquisition signal. The proposed scheme estimates the code tracking bias caused by repeat-back jamming signals using a Combined Pseudo-random noise signal. It then mitigates the repeat-back jamming effect by subtracting the estimated code timing on a normal correlation channel from the estimated value. Through a Monte-Carlo simulation, the proposed scheme can diminish the running average of code tracking bias to less than 10% of the bias using the conventional scheme.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.569-576
• /
• 2010

Jamming simulator has developed for the purpose of the test and evaluation on the electronic protection capabilities of the tracking radar onboard ship. This simulator has the capabilities to generate and radiate the jamming signals against the radar as well as those to receive, analyze and identify the radar signals at a real sea environment. The limited space of ship superstructure has led to the serious distortion caused by the ring around phenomenon that some sidelobes of the jamming beams were coming back to the receiving antenna. In this paper, we have proposed the methods to eliminate the ring around. First, we have inserted the groove metal screen between transmitting and receiving antennas. Second, we have used the PRI(Pulse Repetition Interval) tracking loop to control the switching timing of the input radar and the output jamming signal. Finally, we have demonstrated the performance and effectiveness of the proposed methods through the sea trial.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.3
• /
• pp.181-189
• /
• 2022

The public open signals from Global Navigation Satellite System (GNSS) including Global positioning system (GPS) are used widely by many peoples in the world except for the public regulated restriction signals which are encrypted. Nowadays there are growing concerns about GNSS signal spoofing which can deceive the GNSS receivers by abusing these open services. To counter these spoofing threats, many researches have been studied including array antenna techniques which can detect the direction of arrival by means of Multiple Signal Classification (MUSIC) algorithm. Originally the array antenna techniques were developed to countermeasure the jamming signal in electronic warfare by using the nulling or beamforming algorithm toward a certain direction. In this paper, we study the anti-spoofing techniques using array antenna to overcome the jamming and spoofing issues simultaneously. First, we will present the theoretical analysis results of spoofing signal response of Minimum Variance Distortionless Response (MVDR) algorithm in array antenna. Then the eigenvector algorithm of covariance matrix is suggested and verified to work with the existing anti-jamming method. The modeling and simulation are used to verify the effectiveness of the anti-spoofing algorithm. Also, the field test results show that the array antenna system with the proposed algorithms can perform the anti-spoofing function. This anti-spoofing method using array antenna is very effective in the view point of solving both the jamming and spoofing problems using the same array antenna hardware.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.32-36
• /
• 2016

In wireless communication systems, jamming attack is a critical threat. Especially, reactive jamming can jam when the sender and receiver are communicating, which can maximize the attack efficiency of jamming. In this paper, we use the property of multi-input multi-output (MIMO) technology to achieve jamming resilient orthogonal frequency-division multiplexing (OFDM) communications. In particular, we use MIMO interference cancellation to remove the jamming signals strategically. We first investigate the reactive jamming attack model and their impacts on the MIMO-OFDM systems. We then present an iterative channel estimation algorithm that exploits MIMO interference cancellation. Our simulations show various anti-jamming methods and demonstrate the efficiency of our proposed algorithm under the reactive jamming attack.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.451-456
• /
• 2016

Because GPS signals are weak, system jamming is a real and present danger. This can happen when the receiver is subjected to intentional or unintentional interference by a transmitter. If the jamming signal is strong enough, the receiver can be operated to take corrective action automatically. Current methods to protect GPS receiver from jamming condition are based on spatial filtering. In this paper, the beamforming as referred to in signal processing technique used in arrays for directional signal reception was suggested and analyzed for anti-jamming. In order to change the directionality of the array when receiving a jamming signal, a beamformer can control the signal at each sensor. Therefore, cutoff angle ${\theta}$ was measured in the opposite direction of the jammer. GPS signals are only processed when the antenna element is within inside the cutoff angle. As a result, GPS positioning can be used in condition under cutoff angle $30^{\circ}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1023-1030
• /
• 2014

Beam steering algorithms using array antenna are mainly used in such a manner as anti-jamming method. However, the performance is changed according to the position of signals despite the same number of signals and the same received power. In this paper, we analyzed the effect of the position relationship of the signals on the performance of the beam steering algorithms. Therefore, we defined 'signal separation' as the minimum angle of the interference signals and the desired signal, and analysed the relationship between the C/N0 performance of beam steering algorithms as LCMV/PM and the signal separation. For simulation, we set many GPS signals and jamming signals compared to the degrees of freedom. And changed the position and the height of the receiver in order to obtain various signal separation angles. In addition, we examined the effects of signal separation and JSR on the anti-jamming performance by applying the loss factors of the received power. Through the research, there is a tendency that the performance of beam steering algorithms is increased with the increase of the signal separation, and signal separation is more severely affecting on the anti-jamming performance compared to the number of signals and JSR.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.2
• /
• pp.45-51
• /
• 2014

GNSS has the disadvantage of being vulnerable to jamming, and thus, the necessity of jamming countermeasure techniques has gradually increased. Jamming countermeasure techniques can be divided into an anti-jamming technique and a jammer localization technique. Depending on the type of a jammer, applicable techniques and performance vary significantly. Using an appropriate jamming countermeasure technique, the effect of jamming on a GNSS receiver can be attenuated, and prompt action is enabled when estimating the location of a jammer. However, if an inappropriate jamming countermeasure technique is used, a GNSS receiver may not operate in the worst case. Therefore, jammer identification is a technique that is essential for proper action. In this study, a technique that identifies a jammer based on template matching was proposed. For template matching, analysis of a received jamming signal is required; and the signal analysis was performed using a spectral correlation function. Based on a simulation, it was shown that the proposed identification of jamming signals was possible at various JNR.