• 한국컴퓨터정보학회논문지
• /
• 제16권5호
• /
• pp.101-107
• /
• 2011

본 논문에서는 적응 배열 안테나 시스템에서 간섭 및 재밍 신호를 제거하기 위해서 최적 가중 벡터를 연구하였다. 최적 가중 벡터는 선형 제한 조건에서 최소 분산 알고리즘과 비용함수를 적용시켜 구하였고, 목표물의 신호를 정확히 추정하였다. 적응 배열 안테나 시스템은 간섭 및 재머전력을 감소시키고 신호대 잡음비를 향상시키는 시스템이다. 적응 배열 안테나 시스템은 각 안테나 배열 소자의 출력이 탭(Tap)을 거쳐 지연되고 각 탭에 복소 가중치가 곱해져서 최종적으로 하나의 복합신호를 만든다. 최적의 가중치를 구하기 위해서 본 논문에서는 입력 공분산 행렬의 최적 가중벡터를 이용하였다. 본 논문에서 제안된 알고리즘으로 모의 실험한 결과 분해능은 $3^{\circ}$이하로 향상되었으며 부엽은 약 10 dB 감소하였음을 입증하였다.

• 산업경영시스템학회지
• /
• 제34권3호
• /
• pp.24-34
• /
• 2011

An Unmanned Aerial Vehicle (UAV) is a powered pilotless aircraft, which is controlled remotely or autonomously. UAVs are an attractive alternative for many scientific and military organizations. UAVs can perform operations that are considered to be risky or uninhabitable for human. UA V s are currently employed in many military missions such as reconnaissance, surveillance, enemy radar jamming, decoying, suppression of enemy air defense (SEAD), fixed and moving target attack, and air-to-air combat. UAVs also are employed in a number of civilian applications such as monitoring ozone depletion, inclement weather, traffic congestion, and taking images of dangerous territory. For accomplishing the UAV's missions, guarantee of survivability should be preceded. The main objective of this study is to suggest a mathematical programming model and a $A^*PS$-PGA (A-star with Post Smoothing-Parallel Genetic Algorithm) for an UAV's path planning to maximize survivability. A mathematical programming model is composed by using MRPP (Most Reliable Path Problem) and TSP (Traveling Salesman Problem). A path planning algorithm for UAV is applied by transforming MRPP into SPP (Shortest Path Problem).

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.509-515
• /
• 2011

The radar cross section (RCS) of warships is a crucial design factor to improve the survivability in terms of not only low observablity of the platform but also efficiency of on-board sensors and jamming devices against enemy threat. In design stage, numerical models are generated in order to quantitatively assess RCS, of which hull surfaces are modeled with the finite number of the flat plate. However, in practice, hull surfaces are permanently deformed by various kinds of loads such as winds and ocean waves faced during operations. In this paper, the effect of these shell plate deformation to RCS is numerically investigated. For this purpose, RCS calculations are carried out for various kinds of numerical models, such as single plates, dihedrals, large-sized undulate plates, and virtual warships, with some extent of permanent deformation. The results are compared with those of corresponding models without permanent deformation. It is concluded that the permanent deformation of hull surface highly influences RCS characteristics of warships, therefore they should be considered in the RCS analysis.

• KIEE International Transactions on Power Engineering
• /
• 제4A권4호
• /
• pp.254-261
• /
• 2004

Traditionally, electrical power systems had formed the vertically integrated industry structures based on the economics of scale. However, power systems have been recently reformed to increase their energy efficiency. According to these trends, the Korean power industry underwent partial reorganization and competition in the generation market was initiated in 2001. In competitive electric markets, accurate load data is one of the most important issues to maintaining flexibility in the electric markets as well as reliability in the power systems. In practice, the measuring load data can be uncertain because of mechanical trouble, communication jamming, and other issues. To obtain reliable load data, an efficient evaluation technique to adjust the missing load data is required. This paper analyzes the load pattern of historical real data and then the tuned ARIMA (Autoregressive Integrated Moving Average), PCHIP (Piecewise Cubic Interpolation) and Branch & Bound method are applied to seek the missing parameters. The proposed method is tested under a variety of conditions and also tested against historical measured data from the Korea Energy Management Corporation (KEMCO).

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2005년도 하계학술대회
• /
• pp.141-145
• /
• 2005

In this paper, UWB system did research about effect that interference effect with neighborhood single equipment or nearby group equipment gets In DMB service. 2.6425GHz satellite digital multimedia broadcasting service(SDMB) that electric wave interference special quality is contiguity frequency-band including interference of signal by unnecessary radiation level that is radiated in UWB system, and 3.4125GHz broadcasting relay net that is In-band frequency-band and interference effect degree that get in service did comparative analysis. SDMB system was BER $1{\times}10^{-4}$ that interference effect happens from 6.5m point and broadcasting signal reception is possible at 4m point. Also, it was BER $1{\times}10^{-4}$ that interference effect begins to happen from 5.0m point about center frequency 3.4126GHz and broadcasting signal reception is possible at 2m point. And, confirmed that UWB system of impulse method is less interference effect about 2 dB than UWB system of OFDM method, to electric wave of UWB system that is small output

• 한국군사과학기술학회지
• /
• 제15권2호
• /
• pp.169-176
• /
• 2012

GPS(Global Positioning System) is widely used for the position estimation of an aerial vehicle. However, GPS may not be available due to hostile jamming or strategic reasons. A vision-based position estimation method can be effective if GPS does not work properly. In mountainous areas without any man-made landmark, a horizon is a good feature for estimating the position of an aerial vehicle. In this paper, we present a new method to estimate the position of the aerial vehicle equipped with a forward-looking infrared camera. It is assumed that INS(Inertial Navigation System) provides the attitudes of an aerial vehicle and a camera. The horizon extracted from an infrared image is compared with horizon models generated from DEM(Digital Elevation Map). Because of a narrow field of view of the camera, two images with a different camera view are utilized to estimate a position. The algorithm is tested using real infrared images acquired on the ground. The experimental results show that the method can be used for estimating the position of an aerial vehicle.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.491-494
• /
• 2006

Kalman filtering (KF) is hard to be applied to the SINS (Strap-down Inertial Navigation System)/RDSS (Radio Determination Satellite Service) integrated navigation system directly because the time delay of RDSS positioning in active mode is random. BP (Back-Propagation) Neuron computing as a powerful technology of Artificial Neural Network (ANN), is appropriate to solve nonlinear problems such as the random time delay of RDSS without prior knowledge about the mathematical process involved. The new algorithm betakes a BP neural network (BPNN) and velocity feedback to aid KF in order to overcome the time delay of RDSS positioning. Once the BP neural network was trained and converged, the new approach will work well for SINS/RDSS integrated navigation. Dynamic vehicle experiments were performed to evaluate the performance of the system. The experiment results demonstrate that the horizontal positioning accuracy of the new approach is 40.62 m (1 ${\sigma}$), which is better than velocity-feedback-based KF. The experimental results also show that the horizontal positioning error of the navigation system is almost linear to the positioning interval of RDSS within 5 minutes. The approach and its anti-jamming analysis will be helpful to the applications of SINS/RDSS integrated systems.

• 한국통신학회논문지
• /
• 제17권7호
• /
• pp.730-738
• /
• 1992

본 논문에서는 AWGN, 협대역재밍, 페이딩, 사용자간간섭이 혼재하는 채널에서 FH/SSMA시스템의 성능을 분석하였다. 다수의 사용자가 존재할 때 나타나는 주파수총돌(사용자간 간섭)을 고려하면서,채널의 보조정보를 이용할 경우와 이용하지 않을 경우를 구분하여 부호별 에러확률과 처리능력을 계산하였다. 분석 결과, 복합적인 간섭이 혼재하는 채널환경에서 RS부호가 길쌈부호보다 우수하며, 쇄상 부호는 같은 부호화율인 RS부호와 거의 동일한 성는을 나타냈다. 페이딩이나 협대역재민등 복합적인 간섭이 존재하는 채널환경에서는 에러정정용 부호로서 RS 부호가 최적인 것으로 나타났다.

• 한국의류학회지
• /
• 제28권8호
• /
• pp.1153-1164
• /
• 2004

The purpose of this study was to knitted nine kinds of single knit and examined mechanical properties and hand to provide the fact that knit, tuck and miss stitch applied to various structure have an effect on hand of weft knitted fabrics. It was good to use tuck stitch rather than miss stitch to increase elasticity of knitted fabrics. As tuck stitch and miss stitch were double or triple overlaps, tensile resilence(RT) decreased by increase of friction contacted among stitch. As cross tuck stitch and cross miss stitch were knitted double or triple, bending rigidity(B), hysteresis of bending moment(2HB) and shearing(G) properties increased by jamming of stitch. As tuck stitch and miss stitch were overlap, thickness increased and they became thicker than miss stitch. Also, as they became thicker by these tuck stitch and miss stitch, compressional energy(WC) increased. It appeared that coefficient of friction(MIU) of cross tuck stitch was larger than coefficient of cross miss stitch. Mean deviation of surface roughness(SMD) had a tendency to be larger as tuck stitch and miss stitch increased. As cross tuck stitch and cross miss stitch were overlaps double or triple, KOSHI and FUKURAMI increased, total hand value(TIV) and NUMERI appeared high in double cross tuck stitch and double cross miss stitch.

• 한국위성정보통신학회논문지
• /
• 제12권2호
• /
• pp.83-88
• /
• 2017

본 논문에서는 저고도각 고이득 특성을 이용한 3 소자 CRPA 배열 안테나 설계를 제안하였다. 제안된 안테나는 급전패치와 방사패치로 구성되어 있으며, 급전패치에 동축케이블을 통해 급전부가 직접 연결되고 방사패치에 전자기적으로 간접급전되어 저고도각 이득 특성이 개선되는 구조를 가진다. 제안된 배열안테나의 성능 측정을 전파무반사실에서 수행하였으며, 전면 방향 이득은 2.8 dBic, 축비 특성은 2.7 dB, $75^{\circ}$의 저고도각 평균 이득이 -1.4 dBic를 나타내어 항재밍 성능을 갖는 CRPA 안테나로 적합함을 확인하였다.