• 복식문화연구
• /
• 제20권3호
• /
• pp.319-329
• /
• 2012

The market share of conglomerates is increasing in the Korean school uniform market these days. Functional fit problems occurred. Girls choose slim silhouette often experienced fit problems. The purpose of this study is to probe for functional design elements of high school girls' uniforms. A questionnaire survey was carried out. 202 high school girls took part in the survey. The questionnaire measured school uniform brand preference and size of school uniform jackets. The results of the survey show that over half of participants(56.6%) wore their jackets over nine hours per day. They considered the aesthetics of the design as the most important factor when purchasing school uniforms. That element affected their brand preference. In analyses of the fit suitability, there were no significant differences between brands. The jacket lengths were significantly different among brands, but all were evaluated as being short. About 60% of students had difficulty raising their arms while wearing their school uniform jackets. The results of this study revealed that high school girls' uniform jackets are too short and tight. Ergonomic design elements should be applied to high school girls' uniform jackets.

• 복식문화연구
• /
• 제21권5호
• /
• pp.755-764
• /
• 2013

This study intends to use the basic patterns in 3oz bodice and 2oz sleeve padded jackets made for women in their 20s to research the proper ease of 2oz bodice and 2oz sleeve, 4oz bodice and 3oz sleeve padded jackets. The study also proposes a method of designing padded jacket patterns according to padding thickness. The results of this study are as follows: The 2oz bodice and 2oz sleeve padded jackets had the following sizes. The front and back bust, waist, and hip circumferences were calculated as B/4+2.5cm and B/4+3cm, W/4+2.6+3.3(D)cm and W/4+1.5+2.6(D)cm, and H/4+2.8cm and H/4+3cm, respectively. The length of the jacket was 62.4cm, and the sleeve length was calculated as 63.4cm. For the 4oz bodice and 3oz sleeve padded jackets, the front and back bust, waist, and hip circumferences were calculated as B/4+4cm and B/4+4cm, W/4+4.1+3(D)cm and W/4+2.5+3.6(D)cm, and H/4+4.3cm and H/4+4cm, respectively. The length of the jacket was 63.2cm, and the sleeve length was calculated as 64.2cm. The results of this study showed that padded jackets with thicker padding need more ease. For jackets with stitches, the decreased lengths must be added in the pattern length. The 2oz bodice and 2oz sleeve, 4oz bodice and 3oz sleeve padded jackets all scored 4 points or higher in the movement functionality assessment, thus showing outstanding movement functionality.

• 복식문화연구
• /
• 제19권1호
• /
• pp.31-41
• /
• 2011

Jacket is popular ready-made garment among college students in their early 20s. However, ready-made jackets, which are designed to fit normal people, are not likely to fit sportsmen well who have highly developed muscles in particular parts of their bodies. And muscle development is quite different among sportsmen according to the types of sports and bodily movements. Therefore, ready-made jackets can not be expected to fit sportsmen well as they fit normal people who have different shapes of bodies from sportsmen. The purpose of this study is to investigate the factors of fitness and comfortableness of jackets for sportsmen in their early 20s according to the types of sports to provide basic data for designing suitable garments for them. Research method, 362 college sportsmen in their early 20s were surveyed from June 2nd 2009 to June 9th 2009, and 360 of them were processed statistically, with 2 of them having been discarded for lack of sincerity. Among Taekwondo players, Arm Length was the most complained part, among wrestlers, Biacromion Length was the most complained part, among fencers, 'Waist Circumference' was the most complained part, among swimmers, Biacromion Length was the most complained part, among apparatus gymnast, 'Hip Circumference' was the most complained part, among track athletes and handball players, more than 20% answered that the jackets did not fit them in every parts. It was understood that different sportsmen complained of particular parts of the jackets and that parts of the jacket should be adjusted according to bodily shapes of different sportsmen. This study was made to investigate the factors to be considered in producing ready-made jackets for college sportsmen. It is hoped that more patterns will be developed on the basis of the original form of jacket and the result of this study.

• International Journal of Railway
• /
• 제1권2호
• /
• pp.72-81
• /
• 2008

This paper introduces a new steel jacketing method for reinforced concrete columns with lap splice and evaluates its performance by a series of axial tests of concrete cylinders. At first, 45 concrete cylinders were fabricated with varying the design compressive strengths of 21, 27 and 35 MPa and, then, the part of them was jacketed with two-split-steel jackets under lateral confining pressure. The parameters in the first test were the steel jacket's thickness and the existence of adhesive between steel and concrete surface. In the second test, whole steel jackets were used to wrap cylinders with lateral pressure. Also, a double-layer jacket consisted of two steel plates was introduced; a cylinder was jacketed by two steel plates one after another. The effect of the new method was verified through comparing the results of the compressive tests for plain and jacketed cylinders. The steel jacket built following the new method showed good results of increasing the compressive strength and ductility of the jacketed cylinders with respect to the plain cylinders. The thicker steel jackets showed the more increased compressive strength, and the ductility at failure depended on the welding quality on steel jackets. The adhesive between steel and concrete surface reduced the confining effect of the steel jackets. The whole jacket showed more ductile behavior than the two-split jackets. The double-layered jackets were estimated to possess an equal performance to that of a single steel jacket having the same thickness of the double-layered jacket. Finally, the experimental results were compared with the constitutive model of steel-jacketed concrete; which showed a good agreement between the experimental results and the models.

• 한국의류산업학회지
• /
• 제23권2호
• /
• pp.261-272
• /
• 2021

The purpose of the present study was to evaluate the thermal insulation of air-filled winter jackets according to the amount of air-filler using a thermal manikin. The insulation of these jackets' was compared to a down padded jacket with an identical design and size. The amounts of air-filler were 100% (26,219 cm³), 70% (18,645 cm³), 50% (13,110 cm³), and 0% (0 cm³). The results showed that a clothing insulation (Icl) of 0%, 50%, 70%, and 100% air, and 100% down jackets was 0.208, 0.243, 0.207, 0.176, and 0.315 clo, respectively. In addition, the down jacket with waisttaped had a clothing insulation of 0.369 clo. However, the highest value of clothing insulation per clothing weight was the 50% air-filled jacket in all conditions. In terms of regional power consumption of the thermal manikin, the down jacket consumed less power for the shoulder and chest than the air-filled jackets. In conclusion, in order to maximize the thermal insulation of air-filled jackets, an optimal amount of air-filler, that is, an amount which does not compromise (break) the layer of inner air between the surface of manikin and the lining of the jacket, should be explored. Further studies on lining materials, end-closed design, and changes in thermal insulation under the conditions of strong wind or heavy snow are recommended.

• 한국의류학회지
• /
• 제42권4호
• /
• pp.657-670
• /
• 2018

This study investigated the wearing of jackets by down-aging middle-aged women in their 40s to 50s who enjoy wearing attire from ladies' apparel brands that target the 20s to 30s age group. As a method of research, a survey was done on middle-aged women in their 40s and 50s as the target age group. Based on the survey results, comparison and analysis was done on the wearing of jackets as well as preferred extra space and fitness of the clothes, with the distinction between the down-aging group and the non down-aging group. The down-aging middle-aged women purchased jackets mainly at department stores, outlets, discount outlets, and internet shopping malls, and showed the highest frequency of wearing the jackets once or twice a week. For the item "importance in selecting a jacket", both groups chose "the design" as the most important aspect; however, the non down-aging group took "size and fitness" and "activity and comfort" more than the down-aging group. Especially regarding the size of the jackets, size S (55) was the most often worn by the down-aging group, whereas size M (66) was the most often worn by the non down-aging group.

• Earthquakes and Structures
• /
• 제8권5호
• /
• pp.1017-1038
• /
• 2015

This paper presents a strengthening method that involves the use of ferrocement jackets and chamfers to relocate plastic hinge for non-seismically designed reinforced concrete exterior beam-column joints. An experimental study was conducted to assess the effectiveness of the proposed strengthening method. Four half-scale beam-column joints, including one control specimen and three strengthened specimens, were prepared and tested under quasi-static cyclic loading. Strengthening schemes include ferrocement jackets with or without skeleton reinforcements and one or two chamfers. Experimental results have indicated that the proposed strengthening method is effective to move plastic hinge from the joint to the beam and enhance seismic performance of beam-column joints. Shear stress and distortion within the joint region are also reduced significantly in strengthened specimens. Skeleton reinforcements in ferrocement provide limited improvement, except on crack control. Specimen strengthened by ferrocement jackets with one chamfer exhibits slight decrease in peak strength and energy dissipation but with increase in ductility as compared with that of two chamfers. Finally, a method for estimating moment capacity at beam-column interface for strengthened specimen is developed. The proposed method gives reasonable prediction and can ensure formation of plastic hinge at predetermined location in the beam.

• Earthquakes and Structures
• /
• 제15권3호
• /
• pp.275-283
• /
• 2018

Seismic strengthening is essential for existing bridge piers which are deficient to resist the earthquake. The concrete and CFRP jackets with a bottom-anchoring method are used to strengthen railway bridge piers with low reinforcement ratio. Quasi-static tests of scaled down model piers are performed to evaluate the seismic performance of the original and strengthened bridge pier. The fracture characteristics indicate that the vulnerable position of the railway bridge pier with low reinforcement ratio during earthquake is the pier-footing region and shows flexural failure mode. The force-displacement relationships show that the two strengthening techniques using CFRP and concrete jackets can both provide a significant improvement in load-carrying capacity for railway bridge piers with low reinforcement ratio. It is clear that the bottom-anchoring method by using planted steel bars can guarantee the CFRP and concrete jackets to work jointly with original concrete piers Furthermore, it can be found that the use of CFRP jacket offers advantages over concrete jacket in improving the energy dissipation capacity under lateral cyclic loading. Therefore, the seismic strengthening techniques by the use of CFRP and concrete jackets provide alternative choices for the large numbers of existing railway bridge piers with low reinforcement ratio in China.

• The International Journal of Costume Culture
• /
• 제12권2호
• /
• pp.179-196
• /
• 2009

This is a follow-up study to "An Analysis of the Fitting of Plus-sized Women's Formal Jackets in On-line Shopping Malls", in which we compiled basic sizes of formal jackets sold in online retailers for plus-sized women and compared specific measurements of the jackets from each retailer. Emphasizing a comparison of age groups 20-39 and 40-59, fit evaluations and analyses were conducted in order to provide data to help manufacturers develop formal jacket patterns that reflect physical characteristics of plus-sized consumers and offer better physical fit. The surveys and evaluations were conducted between October 2007 and May 2008. and the compiled data were analyzed using the SPSS 17.0 statistics program. The results were summarized as follows. The two age groups gave different evaluations of the fit problems in the women's formal jackets sold in online retailers. Whereas the age group 20-39 felt that the main problems were in the shoulder, armscye, upper arm, waist, abdomen and hip areas, the age group 40-59 said that they found more problems in the armscye, upper arms, sleeve length and jacket length. Modifying the shoulder area, armscye depth and jacket length severely compromises the jacket's balance, and attention to these areas must be given during pattern design.

• 복식
• /
• 제57권6호
• /
• pp.135-144
• /
• 2007

This study is about the three pieces of jackets with a symmetric collar that was used to fill in the empty spaces in coffin excavated in 2004, from Seok-nam-dong, Nam-gu, Incheon. The similarities of these three jackets are that the collars are symmetric, there are seops(the outer bodies to overlap the front sides of a jacket) with pleats, and openings on the side seam. The No.2, and No.6 seem to be jegori to wear over others, and the fabrics used for No.2 is damask with cloud pattern, and damask with lotus flower pattern. For the No.4, satin was used and there is peacock pattern weaved on satin using golden thread. No.41 is unlined clothes made with Suk-cho, and the distinctive feature about this clothes is that the collar, and the neckline are very narrow. The three jackets are similar with the recently reported clothes of Kim clan of Gang-leung (deducted to be buried in 1520), the collection of Seok Joo-sun Memorial Museum. Through this report, it provides information about some aspects of upper class women's clothes.