• Membrane and Water Treatment
• /
• 제14권4호
• /
• pp.147-153
• /
• 2023

Urbanization has been causing such new pollutants as micro-plastic, thus the environmental impact of new pollutants on ecosystem is rapidly increasing. When it comes to micro-plastic, a representative artificial trace pollutant, its risk has been increased at a much faster rate, however the depth study associated with stormwater sediment and wetland was relatively rare. In this research, soil samples from storm water sediment were analyzed for distribution characteristics of micro-plastics in the J wetland (registered as Ramsar wetland, May 2021 and a representative environmental site in South Korea). Analyzed soil samples found approximately 201 ± 93 particle/kg (based on unit weight, Total micro plastic particles / Total Sample weight) micro-plastics in the samples. When considering the total quantitative numbers in stormwater sediment in the entire area of the J wetland, over 15,000 micro-plastics were estimated to be contaminating such area. In addition, in terms of qualitative numbers, micro-plastics were contaminating the J wetland with 94.7 % ratio of styrofoam type (43.9%) and polyethylene type (50.8%). These research results can be used as base data sets for controlling micro-plastics in the J wetland.

• Journal of applied mathematics & informatics
• /
• 제25권1_2호
• /
• pp.85-107
• /
• 2007

In this paper, we develop a fairly large number of sets of global semiparametric sufficient efficiency conditions under various generalized (${\theta},{\eta},{\rho}$)-V-invexity assumptions for a multiobjective fractional programming problem involving arbitrary norms.

• 유공압시스템학회논문집
• /
• 제6권1호
• /
• pp.10-16
• /
• 2009

Automatic power transmission systems consisted of a torque converter and several planetary gear sets, clutches and brakes are controlled by a hydraulic shift control circuit and an electronic transmission control unit. The hydraulic circuit serves for the operation of the torque converter and lubrication oil supply of the transmission system as well as for the actuation of clutches for the automatic gear shift. The complicated hydraulic control circuit constructed by many spools, solenoids, orifices and flow passages are integrated into one small valve block and it is powered by one hydraulic pump. In this paper, a test equipment was developed to measure the oil consumption of each component at various wide operating conditions. Test data about 730 sets acquired from five test items are analyzed and discussed on the oil capacity of the circuit.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제8권3호
• /
• pp.170-174
• /
• 2008

The measurement of performance of a process considering both the location and the dispersion of information about the process is referred to as the process capacity indices (PCIs) of interest, $C_{pk}$. This information is presented by the mean and standard deviation of the producing process. Linguistic variables are used to express the evaluation of the quality of a product. Consequently, $C_{pk}$ is defined with fuzzy numbers. Lee [Eur. J. Oper. Res. 129(2001) 683-688] constructed the definition of the $C_{pk}$ index estimation presented by fuzzy numbers and approximated its membership function using the "min" - norm based Zadeh's extension principle of fuzzy sets. However, Lee's result was shown to be invalid by Hong [Eur. J. Oper. Res. 158(2004) 529-532]. It is well known that $T_w$ (the weakest t-norm)-based addition and multiplication preserve the shape of L-R fuzzy numbers. In this paper, we allow that the fuzzy numbers are of L-R type. The object of the present study is to propose a new method to calculate the $C_{pk}$ index under $T_w-based$ fuzzy arithmetic operations.

• 미생물학회지
• /
• 제43권3호
• /
• pp.179-185
• /
• 2007

본 연구는 polymerase chanin reaction(PCR)기법과 DNA enzyme-linked immunosorbent assay(DNA ELISA) 기법을 이용하여 토양내 식물병원균인 Ralstonia solanacearum를 검출하고자 하였다. 토양 시료로부터 분석에 사용될 R. solanacearum DNA를 추출하기 위하여 몇 가지 방법을 비교 평가한 결과 기존의 DNA 추출 방법에 비하여 Guanidin isothiocyanate와 Chelex-100 resin을 사용하는 방법 이 토양 내에 존재하는 다양한 중류의 반응 저해 물질과 R. solanacearum만의 고유한 PCR반응 저해물질들을 제거하는 데에 효과적이었다. R. solanacearum만을 특이적으로 검출하기 위해 fliC유전자 부위에 특이적인 몇 종의 primer들을 제작하였다. 이들 중 높은 민감도와 특이도를 나타내는 두 set의 primer RsolfliC(forward; 5-GAACGCCAACGGTGCGAACT-3 and reverse; 5-GGCGGCCTTCAGGGAGGTC-3, designed by J. $Sch\ddot{o}nfeld$ et al.)와 RS_247 (forward; 5-GGCGGTCTGTCGGCRG-3 and reverse; 5-CGGTCGCGTTGGCAAC-3, designed by this study)를 선정하여 nested PCR을 수행할 수 있도록 고안하였다. Nested PCR primer에 biotin을 표지하였고 nested PCR산물의 내부 서열과 특이적으로 교잡반응을 할 수 있는 probe를 제작하여 PCR 결과를 DNA-EIA반응으로 확인 분석할 수 있도록 하였다. Primary PCR과 nested PCR의 산물을 전기영동 상에서 확인한 결과, nested PCR이 약 $10^2$정도의 높은 민감도를 나타내었고 DNA-EIA의 경우 $10^2P{\sim}10^3$정도의 민감도를 상승시켜주는 것으로 확인되었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.178-182
• /
• 2008

Automotive manufacturers lay their eyes on the new manufacturing technologies because of the strengthened competition. Among them, a simultaneous forming is one of the innovative forming technologies to be able to reduce production time and cost. Several parts can be simultaneous manufactured by process, while the conventional stamping demands the same number of die sets with the number of parts. In this study, the automotive front side member was manufactured by the simultaneous forming. The position and the size of initial blank were determined by forming analysis and try-outs, and the blank movement during the forming was controlled by introducing the pilot pin.

• Journal of the Korean Statistical Society
• /
• 제24권1호
• /
• pp.91-109
• /
• 1995

The rate of convergence to a random variable S for an almost certainly convergent series $S_n = \sum^n_{j=1} X_j$ of independent random variables is studied in this paper. More specifically, when $S_n$ converges to S almost certainly, the tail series $T_n = \sum^{\infty}_{j=n} X_j$ is a well-defined sequence of random variable with $T_n \to 0$ a.c. Various sets of conditions are provided so that for a given numerical sequence $0 < b_n = o(1)$, the tail series strong law of large numbers $b^{-1}_n T_n \to 0$ a.c. holds. Moreover, these results are specialized to the case of the weighted i.i.d. random varialbes. Finally, example are provided and an open problem is posed.

• 대한수학회보
• /
• 제26권1호
• /
• pp.35-42
• /
• 1989

Let .ohm.$_{n}$ and Pm $t_{n}$ denote the sets of all n*n doubly stochastic matrices and the set of all n*n permutation matrices respectively. For m*n matrices A=[ $a_{ij}$ ], B=[ $b_{ij}$ ] we write A.leq.B(A$a_{ij}$ .leq. $b_{ij}$ ( $a_{ij}$ < $b_{ij}$ ) for all i=1,..,m; j=1,..,n. Let $I_{n}$ denote the identity matrix of order n, let $J_{n}$ denote the n*n matrix all of whose entries are 1/n, and let $K_{n}$=n $J_{n}$. For a complex square matrix A, the permanent of A is denoted by per A. Let $E_{ij}$ denote the matrix of suitable size all of whose entries are zeros except for the (i,j)-entry which is one.hich is one.

• 제어로봇시스템학회논문지
• /
• 제16권7호
• /
• pp.695-702
• /
• 2010

This paper presents an image alignment algorithm for application of AOI (Automatic Optical Inspection) based on SIFT. Since the correspondences result using SIFT descriptor have many wrong points for aligning, this paper modified and classified those points by five measures called the CCFMR (Cascade Classifier for False Matching Reduction) After reduced the false matching, rotation and translation are estimated by point selection method. Experimental results show that the proposed method has fewer fail matching in comparison to commercial software MIL 8.0, and specially, less than twice with the well-controlled environment’s data sets (such as AOI system). The rotation and translation accuracy is robust than MIL in the noise data sets, but the errors are higher than in a rotation variation data sets although that also meaningful result in the practical system. In addition to, the computational time consumed by the proposed method is four times shorter than that by MIL which increases linearly according to noise.

• 대한원격탐사학회지
• /
• 제10권2호
• /
• pp.49-62
• /
• 1994

Look direction bias in a single look SAR image can often be misinterpreted in the geological application of radar data. This paper investigates digital processing techniques for SAR image data integration and compensation of the SAR data look direction bias. The two important approaches for reducing look direction bias and integration of multiple SAR data sets are (1) principal component analysis (PCA), and (2) wavelet transform(WT) integration techniques. These two methods were investigated and tested with the ERS-1 (VV-polarization) and CCRS*s airborne (HH-polarization) C-SAR image data sets recorded over the Sudbury test site, Canada. The PCA technique has been very effective for integration of more than two layers of digital image data. When there only two sets of SAR data are available, the PCA thchnique requires at least one more set of auxiliary data for proper rendition of the fine surface features. The WT processing approach of SAR data integration utilizes the property which decomposes images into approximated image ( low frequencies) characterizing the spatially large and relatively distinct structures, and detailed image (high frequencies) in which the information on detailed fine structures are preserved. The test results with the ERS-1and CCRS*s C-SAR data indicate that the new WT approach is more efficient and robust in enhancibng the fine details of the multiple SAR images than the PCA approach.