• 한국항만경제학회지
• /
• 제27권3호
• /
• pp.1-12
• /
• 2011

본 논문은 금융위기 이후 대중 수출증가가 경기회복에 주도적 역할을 하고, 우리경제의 중국경제 의존도가 크게 상승하는 상황에서 J-curve 효과가 우리나라 대중국 항만 수출입 흐름에 적용되는가를 월별자료를 이용하여 2000년부터 2010년까지의 기간에 대해 실증분석 하였다. 오차수정모형을 추정한 결과 단기적인 조정역할은 실질실효환율이 수행하는 것으로 나타났으며, 분산분해 결과 대중국 항만 무역수지에 대한 영향력이 국내경기보다 실질실효 환율과 세계경기가 더 크게 나타남을 알 수 있었다. 이와 더불어 수준변수로 구성된 VAR과 오차수정항을 포함한 VECM을 이용한 충격반응 분석을 실시한 결과 대중국 항만 무역수지는 환율 충격에 대하여 시차를 두고 반응을 보이는 것으로 나타나 J-curve 효과가 존재함을 알 수 있었다.

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.153-163
• /
• 2000

The size effect on fracture toughness was investigated by introducing $J-A_2$ theory. For this application,small size specimens were chosen to establish $J-A_2$ assessment curve with FEM analysis. Two-dimensional FEM analysis was conducted with plane strain model using ABAQUS by domain integral method to calculate both crack tip stress and fracture toughness which were used to establish $J-A_2$ curve. The assessment curve predicted the fracture toughness of large specimens very well when compared to the test values. The results showed good prediction for deep crack specimen, though there were acceptable deviations in shallow cracked specimens, presumably caused by constraint effect. When the curve applied to reactor vessel in order to predict end of life fracture toughness with assumption of on-power pressure test condition, it provided the reasonable pressure compared to the existing design value. Better predictions would be possible if more test data were available.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.2963-2971
• /
• 2000

In order to obtain more realistic fracture resistance curve, research is currently underway to introduce new parameter and to quantify the constraint effect. The objective of this study is to investigate the relationship between the constraint effect of a size(plane size and thickness) and the fracture resistance curve. In this paper fracture toughness tests were performed with various plane size and various thickness of specimens in two materials. The test results showed that the effects of plane size in th4 J-R curve were significant and the curve was risen with an increase in plane size. However, relatively weak influence was observed form the change of the specimen thickness and size. The stress fields near the crack tip of th specimen is close to the HRR field according to increasing the plane size and Q stress appears different value according to material properties and the plane size.

• 대한기계학회논문집A
• /
• 제28권4호
• /
• pp.352-361
• /
• 2004

One important element of the Leak-Before-Break analysis of nuclear piping is how to determine relevant fracture toughness (or the J-resistance curve) for nonlinear fracture mechanics analysis. The practice to use fracture toughness from a standard C(T) specimen is known to often give conservative estimates of toughness. To improve the accuracy, this paper proposes a new method to determine fracture toughness using a nonstandard testing specimen, curved wide-plate in tension. To show validity of the proposed curved wide-plate test, the J-resistance curve from the full-scale pipe test is compared with that from the curved wide-plate test and that from the C(T) specimen. It is shown that the J-resistance curve form the curved wide-plate tension test is similar to, but that from the C(T) specimen is lower than, the J-resistance curve from the full-scale pipe test. Further validation is performed by investigating crack-tip constraint conditions via detailed 3-D FE analyses, which shows that the crack-tip constraint condition in the curved wide-plate tension specimen is indeed similar to that in the full-scale pipe under bending.

• 한국해양공학회지
• /
• 제15권3호
• /
• pp.75-80
• /
• 2001

The elastic plastic fracture toughness of this material is evaluated by the an unloading compliance method according to the ASTM E813-97 and E1152-97 method on the smooth and side groove 1CT specimens. The effect of smooth and side groove is studied on the material tearing modulus and characterizes the crack tip field under the plane stress and strain. SG-365 steel is observed that J-R curve and Tmat value decrease as 0%, 20%, 30%, and 40%. The 40% side grooved specimen is very useful in estimation of the $J_IC$. Because it is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides. it improves the accuracy of toughness values, decreases the scattering the them and tunneling and shear lip by the side groove. Applicability of tearing modulus($T_J$ proposed by paris et al as instability panameter for this material is investigated.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.14-21
• /
• 2001

SG-365 steel is an important material End used for manufacturing a pressure vessel and gas piping. In this investigation, the elastic plastic fracture toughness of this material is evaluated by the unloading compliance method according to the ASTM E8l3-97 and E1152-97 method on the smooth and side groove In specimens. The effect of smooth and side groove is studied on the elastic plastic fracture toughness. The side grooved specimen is very useful in estimation of the $J_{IC}$. Because it is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides. it improves the accuracy of toughness values, decreases the scattering of them and crack tunneling effect and shear lip by the side groove.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.107-114
• /
• 2005

In order to analyze the elastic-plastic fracture behavior of a structure, the fracture resistance curve of the material should be known first. The standard CT specimen was used to obtain the fracture resistance curves of a piping system. However, it is known that the fracture resistance curve by the standard CT specimen is very conservative to evaluate the integrity of a structure. Also the fracture resistance curve is effected by the specimen geometry and the dimensions because of the constraint effect. The objective of this paper is to be certain the conservativeness of the fracture resistance curve by the standard CT specimen and to provide an additional safety margin. For these, the fracture tests using a real pipe specimen and the standard CT specimen test were performed. A 4-point bending jig was manufactured for the pipe test and the direct current potential drop method was used to measure the crack extension and the length for the pipe test. Also finite element analyses were performed with a CT specimen and a pipe in order to prove the additional safety margin. From the result of tests and analyses of the pipe and the standard CT specimen, it was observed that the fracture analysis with the standard CT specimen is conservative and the additional safety margin was proved.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1567-1574
• /
• 2001

In order to operate an RPV safely it is necessary to keep the pressure-temperature (P-T) limit during the heatup and cooldown process. While the ASME Code provides the P-T limit curve for safe operation, this limit curve has been prepared under conservative assumptions In this paper the effects of conservative assumptions involved in the P-T limit curve specified in the ASME Code Sec. XI were investigated. Three different parameters the crack depth the cladding thickness and the cooling rate, were reviewed based on 3-D finite element analyses. Also the constraint effect on P-T limit curve generation was investigated based on J- T approach. It was shown that the crack depth and the constraint effect change the safe region in P-T limit curve significantly Therefore it is recommended to prepare a more precise P-T limit curve based on finite element analysis to obtain P-T limit for safe operation of an RPV.

• Journal of Animal Science and Technology
• /
• 제45권5호
• /
• pp.711-724
• /
• 2003

본 연구는 1970년대 이후 축산기술연구소 대관령지소에서 출생한 한우 암소로부터 한우암소의 성장곡선 모수에 영향하는 환경요인의 효과를 추정함으로써 한우의 개량을 위한 정보를 얻고자 실시하였다. Gompertz 모형, von Bertalanffy 모형 및 Logistic 모형에 의해 추정된 성장곡선 모수들의 분산분석 결과는 모두 같은 경향을 나타냈는데, 출생년도-계절의 효과는 성숙체중, 성장비 및 성숙률 모두에게 영향을 미치며, 어미소 연령의 효과는 성장비에서만 영향을 미쳤고, 공변이로 선형 모형에 포함된 최종 체중 측정시 일령의 효과는 성장비를 제외한 성숙체중과 성숙률에 영향을 미치는 것으로 나타났다. Gompertz 모형, von Bertalanffy 모형 및 Logistic 모형에 의해 개체별로 추정한 모수 A는 가을에 출생한 개체들이 봄에 출생한 개체들에 비해 10.47${\pm}$7.9, 19.01${\pm}$9.79 및 13.43${\pm}$5.94kg 더 무거웠으며 Logistic 모형에서 통계적 유의성(P〈.05)이 있었으며, 성숙률은 봄에 출생한 개체들이 가을에 출생한 개체들에 비해 0.00021${\pm}$0.00009, 0.00022${\pm}$0.00009 및 0.00041${\pm}$0.00013으로 높았고 통계적인 유의성(P〈.05)이 있었다. 어미소 연령 그룹별 성장모수들의 최소자승평균치를 보면 연령이 2세나 3세인 어미소로부터 태어난 암소들은 다른 연령그룹의 어미소로부터 태어난 암소들에 비해 성숙체중은 크지 않으면서 성장비가 크고 성숙률은 작은 경향을 보이고 있는데 성숙체중은 크지 않으면서 성장비가 크다는 것은 생시체중이 작다는 것을 시사한다. 따라서 한우 암소를 1산이나 2산까지만 번식에 이용한 후 비육 출하하는 생산체계를 유지하는 집단에서는 축군의 생시체중이 작아지고 성숙체중도 작아지는 현상이 나타날 우려가 있다. 본 연구에서는 성장곡선 모수에 영향을 미치는 환경요인으로서 출생년도-계절과 어미소 연령을 고정효과로 하고 여기에 최종 체중 측정시 일령의 1차식 효과를 공변이로 추가시켰는데, 분산분석 결과 최종 체중 측정시 일령이 세 가지 성장 모형으로 추정한 성숙체중과 성숙률에 영향을 미치는 것으로 나타났다. 이러한 결과들은 최종 체중 측정시 일령에 따라서 성장특성이 달라질 수 있음을 의미하므로 성장곡선 모형의 연구를 위해서는 최종 체중 측정 시점을 변이요인으로 고려하여야 한다. 그리고 한우의 성장 패턴을 좀더 잘 규명하기 위해서는 2차 이상의 다항회귀식 효과에 대한 검토가 필요하다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1175-1176
• /
• 2010