• Journal of the Korean Mathematical Society
• /
• v.58 no.6
• /
• pp.1501-1511
• /
• 2021

In this paper we study magnetic trajectories on ℍ³ × ℝ with respect to the strictly almost Kähler structure. We find three types of magnetic curves which correspond to the almost complex structure compatible to the product metric on ℍ³ × ℝ.

• Bulletin of the Korean Chemical Society
• /
• v.5 no.5
• /
• pp.207-208
• /
• 1984

The tris(hydroxymethyl)aminomethane (Tris)-catalyzed hydrolysis of p-nitrotrifluoroacetanilide was kinetically studied. On the contrary to the previously reported results (R. M. Pollack and T. C.Dumsha, J. Am. Chem. Soc., 1973, 95, 4463), the dependence of the rate on [Tris] consists of an initial curve portion and a subsequent linear increase. This indicates that erroneous conclusions were made in the reported work due to the insufficient amount of data. The initial portions of the rate[Tris] profiles are attributed to the catalyzed breakdown of the tetrahedral intermediate, and the linear portions to the general base-catalyzed water attack at the substrate.

• Journal of Energy Engineering
• /
• v.2 no.1
• /
• pp.95-103
• /
• 1993

A conceptual thermoelectric heat pump(cooling mode) of small capacity is designed. Its performance is investigated through parametric analysis. COP and cooling capacity decease as the ambient temperature increases with ${\mu}$, J, T$\sub$wi/, fixed. To design a system of fixed capacity comes to calculate ${\mu}$ and J when T$\sub$wi/, and T$\sub$a/ are given. As v is fixed by semi-conductor manufacturers, optimum combination of n and I should be searched for ν. Optimum current could be calculated using ${\mu}$-J curve and optimum value of ${\mu}$. COR$\sub$R/ increases as water flow rate increases and T$\sub$a/ decreases. The effect of heat transfer coefficient at hot(heat releasing) side is more significant than that at cold(heat absorbing) side.

• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.503-508
• /
• 2004

This study was conducted to estimate the growth curve parameters of crossbreds between Korean native boars and Landrace sows and their relationships with meat qualities. The data used were weight-age data and carcass data from 131 males and 122 females raised at N.L.R.I in Korea. Growth curve parameters were estimated from nonlinear regression using Gompertz model individually. Average mature weight(A), average maturing rate(k), and average inflection point(u) showing maximum growth rate estimated were 179.54${\pm}$6.06kg, 0.3154${\pm}$0.0059, and 5.50${\pm}$0.11 months in females, and 179.84${\pm}$6.33kg, 0.3049${\pm}$0.0061, and 5.24${\pm}$0.13 months in males, respectively. For the growth curve parameters and derived statistics, the phenotypic correlations of maturing rate with gain rate at inflection, mature weight, and inflection point were - .30, - .77, and - .93 in male, and - .31, - .78 and - .94 in female, respectively. Matrure weight was positively correlated to the inflection point as + .89 in both male and female, indicating that late maturing pigs with lower k had longer maturing period with increasing gain rate and reached point of inflection later than early maturing pigs with higher k, and grew to larger mature weight. Backfat thickness and erode fat contents were correlated with mature weight positively in male and negatively in female, and correlated with gain rate at inflection point positively in both male and female, of which coefficients were as high as .42 and .50 in male, respectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.1
• /
• pp.55-81
• /
• 1989

Recently the instantaneous center concept has been to understand the biomechanics by which a tissue derangement causes a mechanical derangement in human joint. Therefore, to understand the biomechanics of temporomandibular joint (T.M.J.) as a part of human joint, it is necessary to clarify the instantaneous center of rotation (I.C.R.) in the mandibular movement. Twenty male subjects without T.M.J. disorder and mandibular deviation during the mandibular movement were selected for this study. The habitual opening and closing paths were recorded on the paper of the sagittal metal plate by two pencil markers connected to the resin open clutch attached on the lower teeth, which was designed for this study. The coordinates of the 33-target points and the 109-anatomical landmarks were obtained using a Summagraphic digitizer connected to a 18AT computer. The original raw data of the opening and closing paths were smoothed by B-spline curve fitting technique and then the I.C.R. pathways were determined mathematically by the computer using algorithm for finding the I.C.R. of a planer rigid body model. Also the opening and closing movements of the mandible were simulated according to the determined I.C.R. The results obtained from this study were as follows. 1. At the early opening and the last closing, I.C.R's were almost distributed around the mastoid process outside the mandibular body without the presence in the region of the mandibular condyle. 2. The I.C.R. pathway showed variable patterns to each subject at the opening and closing movements. 3. The K constant with uniform pattern was obtained by the rotation angle times the radius, which was assumed to the index of the mandibular movement. 4. The opening and closing movements of the mandible were simulated by the I.C.R. pathways at the habitual opening and closing movements. 5. The mandibular condyle was rotated or translated accordng to the relative rotation angle and radius of the determinant factors of K contant.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.1
• /
• pp.18-22
• /
• 2006

Epitaxial aluminum nitride films on 6H-SiC (0001) were fabricated using reactive RF magnetron sputtering and post-deposition rapid thermal annealing. The electrical properties of AIN films depending on film thickness and measurement temperature have been observed. Full width at half maximum of AIN (0002) was $0.1204^{\circ}$ (about 430 arcsec) X-ray rocking curve results. The equivalent oxide thickness (EOT) of AIN film was estimated as about 10 nm and the leakage current density was within the order of $10^{-8} 4/cm^2$. The dielectric constant of AIN film estimated from the accumulation region of C-V curve measured at $300^{\circ}C$ was 8.3. The dynamic dielectric constant was obtained as 5.1 from J vs. 1/T plots at the temperature ranging from R.T. to $300^{\circ}C$ From above, estimation temperature dependance of the electrical properties of Al/AIN/SiC MIS devices was affirmed and useful data compilation for the reliabilities of SiC MIS is expected.

• Animal cells and systems
• /
• v.15 no.1
• /
• pp.73-78
• /
• 2011

Estimating the habitat potential of inland forest patches for birds requires the modeling of species-area relationships, or relationships between habitat size and numbers of bird species in each patch. The accurate estimation of speciesarea relationships significantly reduces the effort required to recognize the number of species living in each patch. The objective of this study was to estimate the relationship between forest patch size and bird species diversity in Dangjin County, in northwest South Korea, based on the sizes of inland forest patches. KOMPSAT-2 images were obtained and ortho-rectified to construct a map of the target forest patches. The numbers of birds per patch were surveyed four times: August 2008, September 2008, February 2009 and May 2009. Regression models were derived to explain the relationships between the numbers of bird species and patch size. A model that was derived using data from all four observation periods had the highest coefficient of determination ($R^2$). According to these models, the numbers of bird species at first increased linearly with increasing patch size; however, the curve then plateaued. Our model including observations from four seasons will be useful for estimating the numbers of bird species in other inland forest patches in South Korea.

• Journal of Power System Engineering
• /
• v.12 no.5
• /
• pp.40-47
• /
• 2008

The turbulent flow characteristics around a small-size axial fan(SSAF) for a refrigerator are strongly dependent upon the operating points. Four operating points such as $\phi$ =0.1, 0.18, 0.25 and 0.32 were adopted in this study to investigate three-dimensional turbulent flow characteristics around the SSAF by using a fiber-optic type Laser Doppler Anemometer(LDA) system. Downstream mean velocity profiles of the SSAF along the radial distance show that axial and tangential velocity components exist predominantly, except $\phi$ = 0.1, and have a maximum value at $r/R{\fallingdotseq}0.8$, but radial velocity component having a relatively small value only turns flow direction to the outside or the central part of the SSAF. The turbulent intensity shows that the radial component exists most greatly after $r/R{\fallingdotseq}0.5$. Downstream turbulent kinetic energy at $\phi$ = 0.25 and 0.32 together has the largest peak value at $r/R{\fallingdotseq}0.9$.

• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.509-516
• /
• 2003

Growth curves were estimated for 1083 female Korean cattle raised in Daekwanryeong branch, National Livestock Research Institute (NLRI). Comparisons were made among various growth curve models for goodness of fit for the growth of the cows. Estimated growth curve functions were $W_t=370.2e^{-2.208e^{-0.00327t}$ for Gompertz model, for von Bertalanffy model, and $W_t=341.2(1+5.652e^{-0.00524t})^{-1}$ for Logistic model. Ages at inflection estimated from Gompertz model, von Bertalanffy model and Logistic model were 242.2 days, 191.5 days, and 330.5 days respectively, body weight at inflection were 136kg, 115kg, and 170kg, and daily gain at inflection were 0.445kg, 0.451kg, and 0.446kg. The predicted weights by ages from Gompertz model, von Bertalanffy model, and Logistic model were onsistently overestimated at birth weight and underestimated at 36 month weight. The von Bertalanffy model which had a variable point of inflection fit the data best.

• 한국가스학회:학술대회논문집
• /
• 1997.09a
• /
• pp.229-235
• /
• 1997

A low power (300 mW) catalytic bead combustible gas sensor is developed and utilized with a computer controlled sampling system for measuring heat content of natural gas. The heat content of gas is proportional to the change in the energy required to exposure to the sample of combustible gas. The heat content of natural gas samples ranging 36.30 - 39.88 MJ/$m^3$ is measured in the range of approximately $1\%$ error, which is comparable to its nominal heat content. Each gas has a slightly different curve of sensitivity vs. sensor temperature. Thus there Is no temperature at which all sensitivities are equal. In calibration process the choice of a optimum operating temperature is an important factor that influences the overall performance of the measurement system.