• Journal of Animal Science and Technology
• /
• v.44 no.6
• /
• pp.685-692
• /
• 2002

This study was carried out to estimate the genetic correlations for the carcass and growth traits of Hanwoo bulls measured at 12 and 18 months of age on the basis of the data form 1,823 heads of Hanwoo bulls raised at the Livestock Improvement Main Center from 1991 to 1998. Genetic correlations were estimated with multiple trait animal model using MTDFREML. The genetic correlations of the body weight at 12 months with average daily gain during 6${\sim}$12 months and with the body length were 0.76 and 0.79, respectively. The genetic correlations of the body weight at 18 months with average daily gain during 6${\sim}$18 months and with the body length were 0.86 and 0.82, respectively. The genetic correlations of the carcass weight with dressing percent, eye muscle area, backfat thickness and carcass length were 0.39, 0.37, 0.44 and 0.63, respectively. And estimate of 0.36 was obtained for the genetic correlation between backfat thickness and marbling score. The high and positive genetic correlations of 0.71 and 0.96 were estimated for the carcass weight with the body weights at 12 and 18 months. The genetic correlations of the carcass weight with body lengths at 12 and 18 months were 0.63 and 0.75, respectively. Positive genetic correlations were estimated for the dressing percentage with the body weight, average daily gain, body length, thurls width and chest girth. Low genetic correlations were estimated between eye muscle area and the growth traits ranging from -0.07 to 0.32. Dressing percentage was low correlated genetically with the growth traits except for the chest girth at 18 months. The genetic correlation between marbling score and chest girth at 18 months estimated was 0.25.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.387-395
• /
• 2013

Recently, several circumferential cracks were found in the control rod drive mechanism (CRDM) nozzles of U.S. nuclear power plants. According to the accident analyses, coolant leaks were caused by primary water stress corrosion cracking (PWSCC). The tensile residual stresses caused by welding, corrosion sensitive materials, and boric acid solution cause PWSCC. Therefore, an exact estimation of the residual stress is important for reliable operation. In this study, finite element simulations were conducted to investigate the effects of the tube geometry (thickness and radius) on the residual stresses in a J-groove weld for different CRDM tube locations. Two different tube locations were considered (center-hole and steepest side hill tube), and the tube radius and thickness variables ($r_o/t$=2, 3, 4) included two different reference values ($r_o$=51.6, t=16.9mm).

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.143-150
• /
• 2006

The data were collected in the dairy herd improvement program from January 2000 to July 2005. Test data included 825,157 records of first parity and animals with both parents known were included. This study aimed to describe the effect of incomplete lactation records of latest generation to the change in sire's breeding value using Random Regression model (RRM) in genetic evaluation. Estimation of genetic parameter and breeding value for sire used REMLF90 and BLUPF90 program. The phenotypic value on the number of test day records between group TD11, TD8, TD5, TD2 showed no large differences. For all the group heritability of test day milk yield range from 0.30 to 0.36. However TD2 group showed low heritability the least test day recode on the latest generation. The correlation of above 50% between test day and TD11(0.610), TD8(0.616), TD5(0.661) and TD2(0.682) with different records in latest generation. Sire's rank of breeding value varied widely depending on the records on the number of lactation from start to the latest generation. Study showed that change in breeding value ranked if daughter's test recode more so it should have at least 5 test day records. The use of RRM in dairy cattle genetic evaluation would be desirable if complete lactation records for latest generation daughters of young bulls when selection for proven bulls. Random Regression model (RRM) require at least 5 test-day lactation recode.

• Journal of Animal Science and Technology
• /
• v.50 no.2
• /
• pp.151-156
• /
• 2008

The study aimed to estimate genetic parameters of body weights in Hanwoo steers using random regression model and compare it with single trait animal model. A total of 1,372 Hanwoo steers that belonged to progeny testing program of the Hanwoo Genetic Improvement conducted at the Livestock Improvement Main Center of the National Agricultural Cooperative Federation (LIMC-NACF) in Rep. of Korea were used. Results of the random regression model fitting quadratic function revealed heritability values from 0.17 to 0.30 for the whole testing days up to 800 days. The results of the animal model showed estimated heritability values ranged from 0.24 to 0.36. Estimates of permanent environmental correlations tended to increase with increasing test in days. Unlike in the direct genetic correlation that at early stage the estimate was slightly negative it was 0.30 then increased to approach unity at later stage of test. Comparing the results between random regression model and the animal model showed not much differences and both followed similar pattern and therefore the use of random regression model for the national genetic evaluation of Hanwoo could be implemented.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.373-383
• /
• 2012

The performance of underwater acoustic communication system is sensitive to the Doppler shift and ISI(Inter-Symbol Interference). Therefore, the simulation algorithm needs to consider time-spread due to multipath arrivals which cause the ISI, and time-varying Doppler shift along with moving source and receiver. For this purpose, VirTEX(Virtual Time series EXperiment) based on Ray model has been developed. In this paper, VirTEX is used to compare the characteristics of ocean waveguide from the experimental data and illustrate the performance. The CIR(Channel Impulse Response) that characterizes the multipath arrivals with representative time-spread due to multipath arrivals is compared between numerically simulated and experimental probe signal. Also, the communication performance analysis for BER(Bit Error Rate) is compared between numerically simulated and experimental data signal. As a result, VirTEX can be useful as a simulation tool for evaluating the performance of underwater acoustic communication system.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.11
• /
• pp.83-96
• /
• 2016

The surface settlement of the back ground of a braced wall due to the ground excavation has the great influence on the safety of the surrounding area. But it is not easy to predict the settlement of the surrounding area due to proud excavation. Estimation of the settlement of the surface ground induced by the deformation of the braced wall is performed by FEM and empirical method (Peck, Clough etc). In this research, surface settlement of the back ground braced wall depending on the joint dips in rocks during excavating the composit ground was measured at the large scale model test (standard: $0.3m{\times}0.3m{\times}0.5m$). The scale of model test was 1/14.5 and the ground was excavated in ten steps. Earth pressure on the braced wall and ground surface settlement on the back ground of a braced wall were investigated. The surface settlement during the excavation depended on the joint dips in rocks on of the ratio of rock layer. Maximum earth pressure and maximum surface settlement were masured at the same excavation step. In accordance with the increase of the rock layer dips and rock layer ratio, the ground surface settlement increased. The maximum ground surface settlement was 17 times larger at 60 degree joint dips in rocks than that of the horizontal ground conditions. And the position of the maximum surface settlement by empirical method was calculated at the point, which was 17%~33% of excavation depth. In accordance with the increase of the rock layer dips and rock layer ratio, the ground maximum surface settlement increased. The ground surface settlement of composite ground is smaller than that of the empirical.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.234-243
• /
• 1992

Fatigue crack initiation life has a wide scatter and this makes the fatigue design of structural members difficult. In order to make the fatigue life distribution clear, it is required to prepare a large number of specimens and repeat the fatigue tests under the same loading condition. Such fatigue tests usually take much time and cost. In this study, a fatigue testing method using a multi-notched test specimen for the purpose of estimating the distribution function of fatigue crack initiation life by small number of fatigue tests is used. The purpose of this study is to verify the above fatigue testing method of a multi-notched specimen by using Bayesian reliability analysis, Least square method and Skewness method for the determination of unknown Weibull parameters. The multi-notched specimen is a specimen in which several tens of statistically identical notches are prepared.

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.274-284
• /
• 2016

Purpose: The purpose of this work is to describe the spectrometric analysis of gaseous cloud formation over reactor mixed uranium-and-plutonium (UP) fuel $(U_{0.8}Pu_{0.2})O_2$ samples heated to a temperature $>2,000^{\circ}C$, and thus forecast and evaluate radiation hazards threatening humans who cope with the consequences of any accident at a fission reactor loaded by UP mixed oxide $(U_{0.8}Pu_{0.2})O_2$, such as a mixture of 80% U and 20% Pu in weight. Materials and methods: The UP nuclear fuel samples were heated up to a temperature of over $2,000^{\circ}C$ in a suitable assembly (apparatus) at out-of-pile experiments' implementation, the experimental in-depth study of metabolism of active materials in living organisms by means of artificial irradiation of pigs by plutonium. Spectrometric measurements were carried out on the different exposed organs and tissues of pigs for the further estimation of human internal exposure by nuclear materials released from the core of a fission reactor fueled with UP mixed oxide. Results: The main results of the research described are the following: (1) following the research on the influence of mixed fuel fission products (radioactive isotopes being formed during reactor operation as a result of nuclear decay of elements included into the fuel composition) on living organisms, the authors determined the quantities of plutonium dioxide ($PuO_2$) that penetrated into blood and lay in the pulmonary region, liver, skeleton and other tissues; and (2) experiments confirmed that the output speed of plutonium out of the basic precipitation locations is very small. On the strength of the experimental evidence, the authors suggest that the biological output of plutonium can be disregarded in the process of evaluation of the internal irradiation doses.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.605-609
• /
• 2004

Blood pressure (BP) is one of the important physiological parameters for diagnosing cardiovascula diseases by means of noninvasive method. Existing noninvasive methods for measuring arterial BP have to use cuff and difficult in measuring arterial BP continuously. Systolic blood pressure (SBP) and pulse transit time (PTT) have a kind of inverse relationship. We acquired PTT data when subjects were in relaxation and also after exercise. We performed the linear regression analysis for making the regression equations for each subject and the regression equation for all subjects. We compared the estimated SBP with the measured SBP to check the accuracy of our regression equations. From the result, the regression equations for each subject was appropriate according to the American National Standards Institute of the Association of the Advancement of Medical Instrument (ANSI/AAMI) which says that BP devices should have ±5mmHg mean of error and 8mmHg standard deviation of error. However, the regression equation for all subjects was not proper to ANSI/AAMI recommendation. The result means that, without cuff, we can continuously estimate each subject's SBP through PTT and indivisual calibration.

• Korean Journal of Poultry Science
• /
• v.20 no.4
• /
• pp.203-208
• /
• 1993

The objective of this study was to investigate the correlation among the measurements of the body weight and shank length at the age of 0, 4, 8, 12, 16 and 20 wk, and to investigate the regression of the final body weight at the age of 20 wk in selection on the body weight and shank length before 12 wk of age. From the simple correlation analysis, the range of correlation coefficients between body weight and shank length at the same age were 0.50~0.83 from females, and 0.57~0.85 from males over all wk of age(P＜0.01). Correlation coefficient between the body weights at hatch and 20 wk of age was 0.44(P＜0.01), but it was not significant(P＞0.05) between the shank length at hatch and body weight at 20 wk of age. The favorable regression models for the estimation of the body weight at the age of 20 wk from both body weight and shank length before 12 wk of age were the models with the independent variables of measurements at hatch and 12 wk of age($R^2$＝0.96), with the measurements at 8 and 12 wk of age($R^2$＝0.96), and with the measurements at 0, 8 and 12 wk of age ($R^2$＝0.96).